|
| 1 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed by Engr-in-Charges. |
| 2 | Dismantling of damaged Barbed wire of any description and in any position removal from site of work complete all as specified and directed by Engr-in-Chrage . |
| 3 | S & F Barbed wire, Galvanized steel, 2 strand 2.24 mm dia barbed with 2mm dia bars at 75 mm spacing straining and type of standard rails, straining bolt, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc ( each line wire to be measured) complete all as specified and directed by Engr-in-Charges. |
| 4 | Excavating in post holes (or similar holes) each n.exc 0.50 Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil including watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed by Engr-in-Charges. |
| 5 | M & L for rolled steel section as in posts, struts and staples in fencing including cutting to top to shape (swan neck) as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting welding etc and similar work confirming to Fe-290 Gde-165 complete all as specified and directed by Engr-in-Charge. Note:- Fencing Poles will be painted before fixing. |
| 6 | M&L for two coats of synthetic enamalled paint over one coat of red oxide primer on new steel surfaces over 10 Cm width or girth, including preparation of the surface complete all as specified and directed by Engr-in-Charges. |
| 7 | All as per item No 6 above but not exc10 cm width or girth complete all as specified and directed by Engr-in-Charges. Note:- Flat iron will be painted before fixing. |
| 8 | M&L for PCC (1:3:6) type C2 by using 40 mm well graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charges. |
| 9 | Dismantling fencing wire mesh any type and any size complete all as specified and directed by Engr-in-Charges. |
| 10 | Supply only Chain link MS galvanised fencing, any size or type, weight not less than 2.80 Kg/Sqm complete all as specified and directed by Engr-in-Charges. Note :- Per sqm weight of chain link fencing shall be determined by the BOO as detailed by GE. |
| 11 | Fixing only chain link fencing including line wires/ MS round bar (Any numbers), any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wire complete all as specified and directed by Engr-in-Charges. (Note: Supply of flat iron, MS round bar & chain link shall be measured and paid seperately under supply only) |
| 12 | S & F 12 mm dia MS screw bolts any size (machine made) with hexagonal or square heads at one end and screwed the other ends, fitted with washer and one one hexagonal nut exc 5cm long but n exc 10cm complete all as specified and directed by Engr-in-Charges. |
| 13 | Supply only MS rounded bars Fe-290 (Gde-165) 10 mm dia and over cut to length and bend to shape as required as in tie bars, secured with nut, bolt and washers complete all as specified and directed by Engineer-in-Charge. |
| 14 | Demolition of PCC in ground floor and pavings (un-reinfored) n.exc 15 cm thickness (below or above ground level) and including floor finishes etc complete all as specified and directed by Engr-in-Charges. |
| 15 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge |
| 16 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed by Engr-in-Charges. |
| 17 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed by Engr-in-Charges. |
| 18 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed by Engr-in-Charges. |
| 19 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over 20 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charges. |
| 20 | M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed by Engr-in-Charges. |
| 21 | M&L 75 mm thick PCC (1:3:6) type C1 (by using 20mm aggregate) using 20mm graded aggregate as in hardstanding/ Plinth Protection laid in alternative bays area not exc 9 sqm each. complete all as specified and directed by Engr-in-Charges. |
| 22 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge |
| 23 | M&L for square rubble walling Jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charges. |
| 24 | All as per Ser Item No 25 above but except stone complete all as specified and directed by Engr-in-Charges. |
| 25 | M & L brick work with subclass ‘B’ bricks (old size), straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6 as in walls,drains etc, complete all as specified and directed by Engr-in-Charges. |
| 26 | M&L for rendering 15mm thick in CM (1:4) finished even and smooth without using extra cement on external surfaces of concrete surfaces of wall/Drain complete all as specified and directed by Engr-in-Charges. |
| 27 | Material and Labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc., complete all as specified and directed by Engr-in-Charges. |
| 28 | S & F Mild Steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 as drain cover. complete all as specified and directed by Engr-in-Charges. |
| 29 | M&L for cement concrete type B-2 1:2:4 (40mm graded stone aggregate) in walls/sides of drains copings including necessary formwork complete all as specified and directed by Engr-in-Charges. |
| 30 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed by Engr-in-Charges. |
| 31 | S & F Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-410-W Gde E-250 quality A) complete all as specified and directed by Engr-in-Charges. |
| 32 | M&L 20 mm thick Granite work (table rubbed and polished) as in gate pillars and like including moulding (U type) on edges in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charges. |
| 33 | M & L Providing precast cement concrete( Type -B-0 1:2:4 (12.5mm grade aggregade) in Cm 1:4 louvres and jallies, Over 25mm thick (measured solid), including all mould- ings but excluding frame complete all as specified and directed by Engr-in-Charges. |
| 34 | Demolition of ashlar facings, dressed stonework, precast concrete articles RCC Jails and precast concrete block walling complete all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
