Tender For Petty/Essential Repairs To Water Supply System At Sukh Niwas, Dsml, Ml Area, Su Complex, Map Offrs/Anc, 2 Area & 9 Area Of Ge (Af) Tech Area Agra
Tender Value
48 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
5 days left
EMD
96
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty/Essential Repairs To Water Supply System At Sukh Niwas, Dsml, Ml Area, Su Complex, Map Offrs/Anc, 2 Area & 9 Area Of Ge (Af) Tech Area Agra
BOQ
| Sl. No. | Item Description |
| 1 | Taking up/down GI tubing / HDPE / PPR / PVC pipes in any length including fitting from trenches, walls, ceilings for relaying/replacement for the following sizes all as specified and directed :- |
| 2 | 15mm bore tubing |
| 3 | 20mm bore tubing |
| 4 | 25mm bore tubing |
| 5 | 40mm bore tubing |
| 6 | 50mm bore tubing |
| 7 | 80mm bore tubing |
| 8 | 100mm bore tubing |
| 9 | Laying or fixing only, GI tubing with connections in any length as retrieved from item No.1 here-in-before, fixed to wall, ceiling or laid in/on floor after cleaning, washing or removing old screw thread as required with and including providing new fittings, wherever required, complete all as specified and directed for the following sizes :- |
| 10 | 15mm bore tubing |
| 11 | 20mm bore tubing |
| 12 | 25mm bore tubing |
| 13 | Supply, laying, testing of GI tubing medium grade laid in trenches in any length including required GI fitting complete all as specified and directed for the following bore :- |
| 14 | 15mm bore tubing |
| 15 | 20mm bore tubing |
| 16 | 25mm bore tubing |
| 17 | 40mm bore tubing |
| 18 | 50mm bore tubing |
| 19 | 80mm bore tubing |
| 20 | 100mm bore tubing |
| 21 | Supply, fixing, testing of GI tubing medium grade, fixed on walls/ceiling or laid in/on floor in any length including GI fitting and necessary fixing accessories complete all as specified and directed for the following bore :- |
| 22 | 15mm bore tubing |
| 23 | 20mm bore tubing |
| 24 | 25mm bore tubing |
| 25 | M&L for drilling & tapping cast iron mains in position for branch connection of 20mm bore GI pipe with MS clamps including necessary earth work if required etc complete all as specified and directed. |
| 26 | S&F in renewal gun metal globe gate valve with iron wheel head, screwed both ends ISI marked complete all as specified & directed for the following sizes:- |
| 27 | 50mm bore |
| 28 | 40mm bore |
| 29 | 25mm bore |
| 30 | 20mm bore |
| 31 | 15mm bore |
| 32 | S&F in renewal 15mm bore bib tap, standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs) |
| 33 | S&F in renewal 15mm bore bib tap, standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs) |
| 34 | Old Unserviceable GI Tubing 15 mm |
| 35 | Old Unserviceable HDPE/PPR/PVC pipe 15 mm |
| 36 | Old Unserviceable GI Tubing 20 mm |
| 37 | Old Unserviceable HDPE/PPR/PVC pipe 20 mm |
| 38 | Old Unserviceable GI Tubing 25 mm |
| 39 | Old Unserviceable HDPE/PPR/PVC pipe 25 mm |
| 40 | Old Unserviceable GI Tubing 40 mm |
| 41 | Old Unserviceable HDPE/PPR/PVC pipe 40 mm |
| 42 | Old Unserviceable GI Tubing 50 mm |
| 43 | Old Unserviceable HDPE/PPR/PVC pipe 50 mm |
| 44 | Old Unserviceable GI Tubing 80 mm |
| 45 | Old Unserviceable GI Tubing 100 mm |
| 46 | Old Unserviceable Gun Metal Gate Valve 50 mm |
| 47 | Old Unserviceable Gun Metal Gate Valve 40 mm |
| 48 | Old Unserviceable Gun Metal Gate Valve 25 mm |
| 49 | Old Unserviceable Gun Metal Gate Valve 20 mm |
| 50 | Old Unserviceable Gun Metal Gate Valve 15 mm |
| 51 | Old Unserviceable PTMT bib taps |
| 52 | Old Unserviceable S/S Spindle/wedge nut and gland cover 300mm |
| 53 | Old Unserviceable S/S Spindle/wedge nut and gland cover 150mm |
| 54 | Old Unserviceable S/S Spindle/wedge nut and gland cover 100mm |
| 55 | Old Unserviceable S/S Spindle/wedge nut and gland cover 80mm |
| 56 | Old Unserviceablecast iron sluice valve of size 200mm bore |
| 57 | Old Unserviceable cast iron sluice valve of size 150mm bore |
| 58 | Old Unserviceable cast iron sluice valve of size 100 mm bore |
| 59 | Old Unserviceable cast iron sluice valve of size 80mm bore |
| 60 | Old Unserviceable `D` joint with collar and nuts Bolts of size 300/200mm |
| 61 | Old Unserviceable `D` joint with collar and nuts Bolts of size 150mm |
| 62 | Old Unserviceable `D` joint with collar and nuts Bolts of size 100/80 mm |
| 63 | Old Unserviceable `D` joint with collar and nuts Bolts of size 50 mm |
| 64 | Old Unserviceable non return valve of size 150mm |
| 65 | Old Unserviceable non return valve of size 100 mm |
| 66 | Old Unserviceable non return valve of size 80 mm |
| 67 | Old Unserviceable PVC float valve of 25 mm dia |
| 68 | Old Unserviceable PVC float valve of 20 mm dia Total amount of credit schedule 192833.0 Signature of contractor AGE (Contracts) For ACCEPTING OFFICER |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender