Tender For Special Repair To Furniture, Repair To Almirah Large Steel With Shelves, Almirah Medium Steel With Shelves, Almirah Large Steel 1/2Hx1/2S, Locker Steel, Table Peg, Table Centre, Teapoy, Table Dinning, Table 600X900 With Drawer At Otm And M
Tender Value
31.26 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
11 days left
EMD
62520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Furniture, Repair To Almirah Large Steel With Shelves, Almirah Medium Steel With Shelves, Almirah Large Steel 1/2Hx1/2S, Locker Steel, Table Peg, Table Centre, Teapoy, Table Dinning, Table 600X900 With Drawer At Otm And Md Accn Of Cmp C & S Under Ge(South) Bangalore
BOQ
| Sl. No. | Item Description |
| 1 | Almirah large steel with shelves : FD-1031Material and labour for removing of old painted steel surface by using paint remover and acid. repair of all steel surface dent (external and internal). Finish:- All Steel surface shall be pretreated with epoxy powder coated by 07 tank process and oven dried with following specifications:-(a) Dry film thickness more than 45 microns.(b) Salt spray test to withstand more than 1000 hrs.(c ) Adhesion as per DN 53152 standards.(d) Pencil scratch hardnessmore than 2H.The colour shade of outer steel body should be in dual shade. ( Shades as decided by GE)Note : Test certificate of powder coating shall be submitted. |
| 2 | Locker Steel : FD-1029Material and labour for removing of old painted steel surface by using paint remover and acid. Repair of all steel surface dent (external and internad).Finish:- All Steel surface shall be pretreated with epoxy powder coated by 07 tank process and oven dried with following specifications:-(a) Dry film thickness more than 45 microns.(b) Salt spray test to withstand more than 1000 hrs.(c ) Adhesion as per DN 53152 standards.(d) Pencil scratch hardnessmore than 2H.The colour shade of outer steel body should be in dual shade. ( Shades as decided by GE)Note : Test certificate of powder coating shall be submitted. |
| 3 | Almirah Medium steel with shelves : FD-1032Material and labour for removing of old painted steel surface by using paint remover and acid. repair of all steel surface dent (external and internal).Finish:- All Steel surface shall be pretreated with epoxy powder coated by 07 tank process and oven dried with following specifications:-(a) Dry film thickness more than 45 microns.(b) Salt spray test to withstand more than 1000 hrs.(c ) Adhesion as per DN 53152 standards.(d) Pencil scratch hardnessmore than 2H.The colour shade of outer steel body should be in dual shade. ( Shades as decided by GE)Note : Test certificate of powder coating shall be submitted. |
| 4 | Almirah large Steel 1/2H x 1/2S : FD-1033Material and labour for removing of old painted steel surface by using paint remover and acid. Repair of all steel surface dent (external and internad).Finish:- All Steel surface shall be pretreated with epoxy powder coated by 07 tank process and oven dried with following specifications:-(a) Dry film thickness more than 45 microns.(b) Salt spray test to withstand more than 1000 hrs.(c ) Adhesion as per DN 53152 standards.(d) Pencil scratch hardnessmore than 2H.The colour shade of outer steel body should be in dual shade. ( Shades as decided by GE)Note : Test certificate of powder coating shall be submitted. |
| 5 | Table Peg : FD-384 Removing the existing unserviceable top of size 450x300mm made out of 18mm thick pre-laminated MDF board BW type and supply and fix new top with following specification :- Dimention: Overall size shall be 450mm long 300 mm wide and 380mm high. DESCRIPTION: (a) All wood to be used shall be 1st class hard teak wood. (b) Irrespective of what is shown on drg, the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading. (c) Irrespective of what is shown on drg a center stiffener of size 20x40mm shall be provided at center of side bottom rails for extra support (d) PVC hard rubber shoes of 25mm dia shall also be ptovided to bottom of each leg with 20mm long screws. Rest all specifications and dimensions are as per drg FINISH: All wooden surface shall be polished with high gloss Melamine polish in walnut shade after preparation of surfaces. |
| 6 | Table Center : FD-274Removing the existing unserviceable top and supply and fix new top with following specification :-DIMENSION: Overall size shall be 900mm long, 450mm wide and 400mm high.DESCRIPTION:(a) All wood to be used shall be 1st class hard teak wood (b) Irrespective of what is shown on drg, the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading (c) Irrespective of what is shown on drg, one center stiffener of size 20mmx50mm shall also be provided lengh wise at center in between the side bottom rails.(d) 25mm dia hard rubber /PVC rings shall be fixed to be bottom of all legs with 20mm long screws. Rest all specification and dimensions are as per drg FINISH: All wooden surfaces shall be polished in high gloss Melamine finish of walnut shade after preparation of surfaces. |
| 7 | Teapoy : FD-382 Removing the existing unserviceable top and supply and fix new top of size 600mm x 450mm with the following description :- (a) All wood to be used be 1st class hard teak wood. (b) Irrespective of what is shown on drg, the top of table shall be 18mm thick. BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading.(c) Irrespection of what is shown on drg a center stiffener of size 20x40mm shall be provided at center of side bottom rails for extre support. (d) PVC hard rubber shoes of 25mm dia shall also be provided to bottom of rach leg with 20mm long screws. Rest all specification and dimensions are as per drg. FINISH: All wooden surfaces shall be polished in high gloss Melamine polish in walnut shade after preparation of surfaces. |
| 8 | Table Dining 6 Persons: FD-239, 273Removing of existing unserviceabe broken top of size 1500mmx 900mm and 18mm thick particle board and fix new topDIMENSION: overall size be 1500mm long, 900mm wide and 750mm high DESCRIPTION:(a) All wood to be used be 1st class hard teck wood. (b) Irrespective of what is shown on drg, the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading (c) Irrespection of what is shown on drg, the top shall be fixed over the frame with suitable screws from under neath.(d) Eight wooden corner brackets made to shape of size 100mm x 100mm x 35mm thick shall also be fixed in between the legs and top rails with adhesive and wooden screws to make the table more strudy.(e) 25mm dia hard plastic shoes shall also be provided to bottom of all legs with 20mm screws.Rest all specification and dimensions are as per drg FINISH: All metal surface shall be drg powder coated in black and all unlaminated surfaces shall be polished in satin/mat melamine finish of walnut shade after preparation of sufaces. |
| 9 | Table 900x600 with drawer: FD-283Removing the existing unserviceable table top of size 900mmx600 of prelaminated particle board 18mm and supply and fix new top with following specification :- DESCRIPTION:(a) All wood to be used be 1st class hard teak wood. (b) Irrespective of what is shown on drg, the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading.(c) Irrespective of what is shown on drg, one center stiffener of size 20mmx50mm shall also be provided lengh wise at center in between the side bottom rails.(d) 25mm dia hard rubber /PVC rings shall be fixed to be bottom of all legs with 20mm long screws Rest all specification and dimensions are as per drg FINISH: All wooden surfaces shall be polished in high gloss Melamine finish of walnut shade after preparation of surfaces. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 days