|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for.Complete all as specified and as directed. |
| 2 | M&L Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.Complete all as specified and as directed. |
| 3 | Dismantling of plain or corrugated steel/ AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including translucent sheet at any height complete all as specified and directed |
| 4 | M & L pre-painted hot-dip aluminium-zinc alloy metallic coated any approved corrugated profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed. |
| 5 | All as per item above but in plain steel sheet for Ridges complete all as specified and as directed. |
| 6 | M&L Dubbing out average 15mm thick on irregular face of walls chajja roof projection ceiling facia etc in CM 1:3 finished even and smooth includ roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified. |
| 7 | Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thick below or above ground level complete all as specified and directed |
| 8 | M & L 25mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floor complete all as specified and directed. |
| 9 | Dismantling of floor, hearth or wall tiling including cement mortar bedding removing rubbish off the premises complete all as directed. |
| 10 | M&L for Non skid coloured ceramic tiles7to 8 mm thick(square/Rectanglar) area of each tiles exc .11 Sqm but not exc 0.18 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed. |
| 11 | M&L for Non skid coloured ceramic tiles7to 8 mm thick(square/Rectanglar) area of each tiles exc .18 Sqm but not exc 0.38 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.Complete all as specified and as directed. |
| 12 | M&L for coloured glazed ceramic tiles 300x250 x7mm/450x600x7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:4 .Complete all as specified and as directed. |
| 13 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.Complete all as specified and as directed. |
| 14 | S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long.Complete all as specified and as directed. |
| 15 | M&L 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling.Complete all as specified and as directed. |
| 16 | S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with inlet bal valve float and handle bracket flush pipe & all fitting.Complete all as specified and as directed. |
| 17 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 18 | M&L for Brick work with Sub class B Fly ash bricks, old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed. |
| 19 | Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water and removing all debris materials of MOD land etc complete all as specified and as directed. |
| 20 | M&L for rendering 10 mm thick cement plaster in cement mortar (1:6) on other than fair faces of brick or concrete surfaces, finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for rendering 15 mm thick cement plaster in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. Note :- WPC measured and paid separetely. |
| 22 | M & L for rendering 5mm thick cement plaster in CM 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L Preparing New plastered surfaces of wall and applying two coats of oil emulsion distemper including a coat of chalk whitening preparatory to distemper surface .complete all as specified and as directed. |
| 24 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant priming paint.complete all as specified and directed. |
| 25 | M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash.complete all as specified and as directed. |
| 26 | Taking down chowkats of frames wth shutters (without taking out off shutters from the frame) exc 1.5 sqm and n exc 4.00 sqm each including hold fasts and removing the same from site . complete all as specified and as directed. |
| 27 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed (unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts.complete all as specified and as directed. |
| 28 | Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each .complete all as specified and directed. |
| 29 | Taking down shutters of any description n exc 1 sqm each .complete all as specified and directed. |
| 30 | S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, size 125 mm X 60 mm, Profile C, single rebate or more including hinges, mortar guards, lock strike plate, shock absorbers complete all as specified and as directed. |
| 31 | S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, size 105 mm X 60 mm, Profile C, single rebate or more including hinges, mortar guards, lock strike plate, shock absorbers complete all as specified and as directed. |
| 32 | S & F 30mm thick plain, framed, panelled shutters (any number of panels), with 2nd class Hard wood with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats.complete all as specified and as directed. |
| 33 | M & L for 30 mm thick,Glazed and skeleton shutters, with 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 and fitted to chowkats.complete all as specified and as directed. |
| 34 | M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.complete all as specified and as directed. |
| 35 | M&L 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work.complete all as specified and as directed. |
| 36 | Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm Prelam PVC sheet reinforced with MS square tube, fixed in opening. complete all as specified and directed. |
| 37 | S&F factory made solid panel Plain PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of both sides plain PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed. |
| 38 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core.complete all as specified and directed. |
| 39 | S&F Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) min wt 0.80 Kg per Rm.complete all as specified and as directed. |
| 40 | S&F Powdercoated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 41 | S&F Powder coated anodised aluminium window and ventilator shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, locking clips, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 42 | M& L for 4 mm thick ACP board (Aluminium composit panel), exterior grade, (approved colour) fixed with aluminium tappered clip to aluminium frame work all complete all as specified and as directed |
| 43 | S & F steel window with side hung shutters including box type hinges with steel handle and steel pag stay complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 44 | S & F steel window with side hung shutters including box type hinges with steel handle and steel pag stay complete without glazing bars, dovetailed or welded.complete all as specified and directed. |
| 45 | S&F steel windows/ventilater with fixed type withglazing bars.complete all as specified and as directed. |
| 46 | S&F steel ventilater with top hung shutter including box hinges and mild steel peg stay.complete all as specified and as directed. |
| 47 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane.complete all as specified and as directed. |
| 48 | S&F sheet glass 3mm thick figured glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane .complete all as specified and as directed. |
| 49 | Hacking out old broken glass (any thickness site quality or description)from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with putty or fixed with beads.complete all as specified and as directed. |
| 50 | S&F fixed in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples. complete all as specified and as directed. |
| 51 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples. complete all as specified and as directed. |
| 52 | S&F mild steel 300mm ordinary rat tail road patern spring including roller and roller plate.complete all as specified and as directed. |
| 53 | PCC 1:3:6 type B0 using 12.5mm graded stone aggregate as in filling of pressed steel frame and for parapet coaping works. complete all as specified and directed. |
| 54 | S&F MS butt hinges medium weightcold rolled mild steel 100mm size .complete all as specified and as directed. |
| 55 | S&F MS butt hinges medium weightcold rolled mild steel 75mm size complete all as specified and as directed. |
| 56 | S&F aluminium bow handle cast type anodised 150mm.complete all as specified and as directed. |
| 57 | S&F aluminium bow handle cast type anodised 100 mm.complete all as specified and as directed. |
| 58 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed of legth 150mm size.complete all as specified and as directed. |
| 59 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed of legth 200mm size.complete all as specified and as directed. |
| 60 | S&F mild steel sliding door bolts 250mm size plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts plate and nuts, four on bolts and two on staple plate in wooden shutters and welded /diveresed in steel shutters.complete all as specified and as directed. |
| 61 | S&F 150mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.complete all as specified and as directed. |
| 62 | M&L for preparation of wooden surfaces and applying two coat of synthetic enamel paint of any description not other wise described over 10 cm width or grith over a coat of pink primer etc. complete all as specifed and as directed. |
| 63 | M&L for preparation of new Steel surfaces and applying two coat of synthetic enamel paint of any description not other wise described over 10 cm width or grith over a coat of red oxide zinc chrome primer etc complete all as specifed and as directed. |
| 64 | S&F 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws.complete all as specified and as directed. |
| 65 | S&F in repair door closer aluminium extruded section hydraulically regulated, designation No.1, universal type, suitable for door shutters o f700 mm in width and of weight between 35 kg and fixed.complete all as specified and as directed. |
| 66 | S&F Mortice lock, 4 lever, aluminium, vertical type, size 100 mm.complete all as specified and as directed. |
| 67 | S&F in repair Double action floor springs hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main of brass with stainless steel cover governing pivot made of brass other parts made of M S heavy duty.complete all as specified and as directed. |
| 68 | M&L for easoning / adjusting securing and making smooth for funtioning of steel windows shutter by means of welding, bolting screwing with necessory tools and plants to make the window shutter functionable include necessory hinges handles, tower bolts etc exc 1 sq. m and n exc 2 sq. m each as specified and directed by Engr in Charge. |
| 69 | S&F 4.8mm thck Sheet glass, selected quality plain/coloured and glazing with alum beads in square/ Rectangle for doors windows etc exc 0.5 Sqm each pane.complete all as specified and directed. Please Enable Macros to View BoQ information |
