Tender For special Repair To Otm Accn Of Jcos Bldg No P-62 & P-63 (08 Rooms & 08 Bathrooms) Under Age Br Ii At Old Amritsar Cantt
Tender Value
37.85 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
7 days left
EMD
75700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Otm Accn Of Jcos Bldg No P-62 & P-63 (08 Rooms & 08 Bathrooms) Under Age Br Ii At Old Amritsar Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified directed. |
| 2 | Material & Labour for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in base of flooring etc if required complete all as specified directed. |
| 3 | Material & Labour for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.18 sq.m but not exceeding 0.38 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed. |
| 4 | Ditto all as per item No 3 above but as in dado, riser & skirting over & incl 10mm thick rendering in Cement Mortar 1:3 complete all as specified directed. |
| 5 | Material & Labour for Glazed ceramic coloured tiles in vertical surfaces 350 x 250x7 /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, & incl 10mm thick rendering in Cement Mortar 1:3 complete all as specified directed. |
| 6 | Taking down cement plaster on brick or concrete walls, ceiling etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed. |
| 7 | Material & Labour for rendering 5mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified directed. |
| 8 | Material & Labour for Rendering 15 mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | Material & Labour 15 mm thick cement plaster in cm 1:4 mixed with liquid water proofing compound @ of 3% on brick or concrete surface of walls finished surface even and fair without using extra cement all as specified and directed Note: Supply only water proofing liquid will be measured and paid separately. |
| 10 | Material & Labour preparing New plastered surfaces of wall and applying two or coats of 100% Premium acrylic emulsion paint having VOC less than 50gm / litre and UV resitance as per IS 15489: 2004, Alkali & fungal resisitance , dirt resitance extterior paint of required shade (Company Depot Tinted) withsilidon addiitives @ 1.43 litr/10 Sqm over and including priming coat of exterior priomer applied @ 0.90 litrs/10 Sqm over new wall surfaces complete all as specified and directed. |
| 11 | Material & Labour for complete removal of existing treatment complete and applying two or coats of 100%Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resitance as per IS 15489: 2004, Alkali & fungal resisitance , dirt resitance extterior paint of required shade (Company Depot Tinted) withsilidon addiitives @ 1.43 litr/10 Sqm over and including priming coats of exterior priomer applied @ 0.90 litrs/10 Sqm over old surfaces upto height of 7.5 m complete all as specified directed. |
| 12 | Material & Labour preparing New plastered surfaces on walls and applying one coat of primer, two coats of oil bound distemper over including 1 mm wall care putty complete all as specified and directed. |
| 13 | Material & Labour complete removal of existing treatment on walls and applying one coat of primer, two coats of oil bound distemper complete all as specified and directed. |
| 14 | Material & Labour for complete removal of existing treatment on ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 15 | Dismantling of brick tiles or terracing tiles single layer on roof complete all as specified and directed. |
| 16 | Demolition of Mud in roof any thick ness including plastering and leeping (Whether full thickness removed or only a part therof), complete all as specified directed. |
| 17 | Material & Labour for PCC 1:2:4 type B-1 50 mm thick average (using 20mm graded stone aggregates) mixed with water proofing liquid as in padding, in roof kerb to amintain slop correction of the depressed undraution portion complete all as specified and as directed. |
| 18 | Material & Labour for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric( weight not less than 150 gms/sqm) laid on primed surface by forced application with and including approved bitumen primer as per manufacturer's instructuctions including cleaning the surfaces complete as per manufacturer instructions and all as specified and as directed. |
| 19 | Material & Labour for 40mm thick brick tiles laid on concrete roof padding over and including 15 mm thick cement screed bed in Cement Mortar (1:6) using grey cement, jointed and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.Note: Water Proofing Compound will be measured and paid seperately as supply only. |
| 20 | All as per Srl item no. 19 above but except tiles (using serviceable tiles obtained from dismantling) complete all as specified and as directed. |
| 21 | Supply & Fixing in repair 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, incl hacking out complete all as specified directed. |
| 22 | Material & Labour for preparation of New steel surface of any description not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified directed. |
| 23 | Material & Labour for painting to New wooden surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces etc,complete all as specified directed. |
| 24 | Supply & Fixing 110 mm PVC (SWR) pipe single socket in any length with rubber ring joints fixed in walls, complete all as specified and directed. |
| 25 | Supply & Fixing for 110 mm PVC (SWR) bend any radius joints fixed in walls, complete all as specified and directed. |
| 26 | Supply & Fixing PVC (SWR) vent cowel equal or unequal for 110mm dia bore including,jointing with solvent cement, complete all as specified and directed. |
| 27 | Material & Labour PVC (SWR) gully trap 125mm /110mm including, setting and jointing with solvent cement etc complete all as specified and directed. |
| 28 | Supply & Fixing fixed in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. |
| 30 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each completed all as specified and directed. |
| 31 | Supply & Fixing factory made solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening complete all as specified and directed. |
| 32 | Supply & Fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheeets for top rail locj rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling ofg plain colour PVC sheets to be foitted in the MS frame wwelded/sealed to the stiles and rails with solvent cement all as specified and shown on drg, complete all as specified and directed. |
| 33 | Material and labour in repair for Box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1020/08 SH 1/3 to 3/3 dated 01 may 2008 complete all as specified and directed as follows:-(a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf(c) MS tower bolt 150mm long - 02 Nos per leaf(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf(e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly (h) 3mm thick clear glass sheet 3 Nos per leaf glazing with oil putty(i) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leafNote :- Including taking down old steel / wooden window including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in Cement Mortar 1:4 and match with existing finish complete all as specified and directed. For Painting shall be measured and paid separately. complete all as specified and directed. |
| 34 | Material and labour in repair for Box type steel vetilator made of ERW hollow P-Section size 60 mm x 25 mm, Single rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1019/08 SH 1/3 to 3/3 dated 01 may 2008 complete all as specified and directed as follows:-Note :- Including taking down old steel / vetilator including hold fast PCC 1:2:4 type B0 (four No’s for Each ventilator) & around required plaster in Cement Mortar 1:4 and match with existing finish complete all as specified and directed. Glazing, wire mesh as required and painting shall be measured and paid for separately complete all as specified and directed. |
| 35 | Supply & Fixing Presed steel frames for doors Size of frame 125 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate and including packing of PCC 1:2:4 type B0 inside the frame etc complete all as specified and directed. |
| 36 | Supply & Fixing Presed steel frames for doors Size of frame 105 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate, and including packing of PCC 1:2:4 type B0 inside the frame etc complete all as specified and directed. |
| 37 | Supply & Fixing factory made 30 mm thick Flush shutters , solid core construction , with block board core and covered with 0.50 mm thick laminate on both side wood grain texture with lipping to match, complete all as specified and directed. |
| 38 | Supply & Fixing factory made 35 mm thick, 2nd class hardwood , glazed & Skeleton shutter open rebatedand prepared to receive glass gauge etc without sash bars) edges of framing plain chamfered or founded, fitted with cut and mitered beads for securing glass etc size of members shutters as specified in SSR Part-I Section 8clause 8.24 (a) complete all as specified and directed. |
| 39 | Supply & Fixing butt hinges 100mm, medium weight, cold rolled mild steel and fixed, complete all as specified and directed. |
| 40 | Supply & Fixing 100mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 41 | Supply & Fixing 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed. |
| 42 | Supply & Fixing fixed 250 mm Aluminium alloy, anodised, sliding door bolts with hasp and stapple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 43 | Supply & Fixing fixed in repair Aluminium (extruded Section body) door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed. |
| 44 | Supply & Fixing 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed, complete all as specified and directed. |
| 45 | Supply & Fixing fixed in repair Hat pegs soat hooks Aluminium solid body, 175 mm to 250 mm and fixed, completed all as specified and directed. |
| 46 | Supply & Fixing Fixed in repair Curtain rails harrison rails steel chromium plated with fixing brackets stop roller etc completed all as specified and directed. |
| 47 | Supply & Fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and fixed, complete all as specified and directed. |
| 48 | Supply & Fixing fixed in repair aluminium andosed tubular towel rail, 20 mm dia D type , 60 cm long between flanges, complete all as specified and directed. |
| 49 | Supply and Fixing in repair of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:- Flushing cistern, flush pipe will be measured and paid for separately as supply only. |
| 50 | Supply only PVC valveless, syphonic action type 10.00 ltrs flushing cistern, low level white with inlet, ball valve, float and handle including brackets, completed all as specified and directed. |
| 51 | Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) complete all as specified and directed. |
| 52 | Supply and fixing in repair Chromium plated Health faucet in repairs with 1.5 metre long chain, complete all as specified and directed. |
| 53 | Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail, complete all as specified and directed. |
| 54 | Supply and Fixing in repair Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing complete all as specified and directed. |
| 55 | Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed. |
| 56 | Supply and Fixing in repair CP (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 57 | Supply & Fixing in repair PVC Connections 15mm size with PTMT nuts of length 450mm, completed all as specified and directed. |
| 58 | Supply & Fixing fixed in repair 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or brass ferrule completed all as specified and directed. |
| 59 | Supply & Fixing in repairs 15mm bore stop valve fancy type chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including extra CP nipple wherever required. all as specified and directed. |
| 60 | Supply & Fixing fixed in repair 15mm Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed, completed all as specified and directed. |
| 61 | Supply & Fixing Fixed in repair 15mm bore fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed for iron pipe completed all as specified and directed. |
| 62 | Supply & Fixing fixed in repair 20 mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 63 | Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including dismantling old water tanks, complete all as specified and directed. |
| 64 | Supply & Fixing fixed in repair vitrous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, PVC watse pipe 32 or 40mm bore 60 cm long complete all as specified and directed. |
| 65 | Supply & Fixing Galvanised steel water Tubes 15 mm Dia, medium grade', galvanised,with all fitting; and fixed, including taking down the existing pipe to wall and ceiling and laid to floor, complete all as specified and directed. |
| 66 | Supply & Fixing Galvanised steel water Tubes 20 mm Dia, medium grade', galvanised,with all fitting; and fixed including taking down the existing pipe to wall and ceiling and laid to floor, complete all as specified and directed. |
| 67 | Material & Labour for Cutting into existing manholes for connecting new drains 150mm internal dia old pipe and making good to pipe and rendering cutting out existing benching for forming branch channel (1/2 Band to 3/4 section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished, and reforming benching as required all as specified and directed. |
| 68 | Material & Labour for 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars internal dia complete all as specified and directed.NOTE : Excavation & earth work and PCC bed, benching & haunching will be measured and paid for separately. |
| 69 | Material & Labour for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm dia SGSW / RCC NP-2 pipe complete all as specified and directed. |
| 70 | Material & Labour for 20mm thick screed bed or bedding layer of mortar for laying floor finishes in Cement Mortar 1:4 complete all as specified and directed. |
| 71 | Material & Labour 100mm thick plain cement concrete 1:4:8 type B-2 using 40mm graded crushed stone aggregate) as in floor complete all as specified and directed. |
| 72 | Material & Labour for chequered cement concrete tiles 20cmx20cmx25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment, complete all as specified and directed. |
| 73 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc, complete all as specified and directed. |
| 74 | Material & Labour Brick work with sub class \\"B\\" bricks, straight or curved on plan exc 6 m mean radius , built in Cement Mortar 1:6 , complete all as specified and directed. |
| 75 | Material & Labour 75 mm thick, plain cement concrete 1:3:6, type C-1 using 20 mm graded mechaically crused stone aggregates, laid in 1:20 slop as in Plinth protection/paving/shafts including making joints at 3.00 m intervals and at each corner, the joint shall be filled with mastic filling to full depth) comprising of one partheated hot below bitumen 85/25, two parts heated sand (by volume), surface fininshed even and smoot witout using extra cement complete all as specified. Note : The concrete shall be laid at a strech not exceeding 3m in legth and width of joint shall not more than 12mm complete all as specified directed. |
| 76 | Supply & Fixing in repair 20mm float valves high pressure of PTMT with epoxy coated aluminium rod and high densit plastic ball screw for iron pipe or brass ferrle completed all as specified and directed. |
| 77 | Material and labour in repair for water proofing treatment to existing sunken floors/ slab of kitchen, toilets, laboratories, bath and WCs etc comprisis as under:-(a) Demolition and Remove all the existing sunken treatment and clean the sunken/lowered portion of RCC slab surface for full depth of sunken floor by wire brush .Chisel out any mortar sticking the surface .(b) All pipes passing through walls of sunken floors shall be laid before water proofing treament is carried out.One No. 50 mm dia , 35 cm long medium grade GI pipe with wire gauge on inside mouth shall be provided to each sunken portion.(C) Applying FOSROC Nitroproof 600 PF (Minimum 0.8 mm dft) over a priming coat of Nitroproof WB Primer or equivalent product of Asian Paints ,M/s MC Bauchemie /CIPY/ SIKA/Pidilite Dr Fixit/Thermax/STP/Berger applied as per manufacturer's instructions to bottom and full verticle sides of sunken floors.(d) Fill it with water and check for dampness and seepage . In case the slightest indications of seepage/leakage is noticed , the same shall be rectified by injection grouting to seal all cracks or application of Polymer modified mortar of FOSROC Nitobond SBR or equivalent of M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr. Fixit / Asian paints / Thermax / STP/ Berger admixed with integral WPC or cementitious crystalline waterproofing compound in the affected area to seal all cracks and micro cracks if any, and this shall be done by contractor at his own cost complete all as specified and directed. WPT shall be done by contractor through authorised applicator of Manufacturer's. |
| 78 | Supply and fixing solid PVC board 18mm thick plain colour as in cup board shelves, kitchen cabinet etc., complete all as specified and directed. |
| 79 | Supply and fixing solid PVC shutter one side prelam of any shade 18mm thick plain colour as in cup board/ kitchen cabinet shutter including handles, hinges tower bloths etc, complete all as specified and directed. |
| 80 | Supply and fixing solid PVC sheet 5mm thick plain colour as in cup board, kitchen cabinet etc, complete all as specified and directed. |
| 81 | Materal and labour for PCC 1:2:4 type B-1 using 2.5 mm graded stone aggregate for repair of chajja, facia, parapets etc including reiforcement 10mm TMT bars as required thickness exc 50mm finished in cement plaster 1:3 upto height upto 8 m height inclding necessary form work, scaffolding and applying two coats of cement base paint including necessary cuttings, chases, scraping etc. to old concrete complete allas specified and directed. Materal and labour for PCC 1:1.5:3 type using A0 using 12.5 mm graded stone aggregate for repair of chajja, facia, parapets etc using chiken wire mess upto height upto 8 mtr height inclding necessary form work, scaffolding and applying two coats of cement base paint over a coat of primer over cement plaster 1:4 complete allas specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender