Tender For Special Repair To Smc , Provn Of Ladies Toilet At Site-Iii ( L-Shape Bldg)Of 29 Ed And Provn Of Toilets For Applicants At 3 Asc At Afs Kanpur
Tender Value
38.64 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
8 days left
EMD
77280
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Smc , Provn Of Ladies Toilet At Site-Iii ( L-Shape Bldg)Of 29 Ed And Provn Of Toilets For Applicants At 3 Asc At Afs Kanpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed. |
| 2 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 3 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 4 | S&F fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washer in roof, wall etc, all as specified and directed. |
| 5 | Demolition of brick work of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 6 | M & L for brick work old size with sub class `B` bricks in cement mortar straight or curved on plan exceeding 6 m mean radius built in CM (1:4) provided complete all as specified and directed |
| 7 | M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 8 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 as in half bricks complete all as specified and directed. |
| 9 | Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 10 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 11 | M &L for Preparation of new plastered surface and applying two coats of Exterior weather emulsion over a coat of exterior wall primer on surfaces of wall complete all as specified and as directed. |
| 12 | M &L for Preparation of new plastered surface and applying two coats of Oil bound distemper over a coat of primer and 1mm thick wall care putty complete all as specified and as directed. |
| 13 | Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 14 | M & L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and directed. |
| 15 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 16 | M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade with grey cement and pigment complete all as specified and directed. |
| 17 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets including grid work complete all as specified and directed. |
| 18 | Supply and fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and pattern having moister content less than 2%, humidity resistant of 99%, NRCO.50 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (part 4) - 1970 and light reflectance of 85% minimum to be laid in true horizental level suspended on inter-locking metal T-Grid of hot dipped galvanised ireon section of 0.33mm thick (galvanised @120gm/Sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross T of size 15 x 32 mm of length 1200mm and secondary intermediate corss T of size 15 x 32 mm of length 600mm to from grid module of size 600x 600 mm suspended from ceiling using galvanised mild steel items (galvanised @ 80gm/Sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifiection, drawing and as per directed of Engineer-in-Chagre. |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 20 | Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) andhanging; also fastening and fixing complete all as spcified and directed. |
| 21 | S&F Bands, straps, supports or staysfor rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to M & L for preparation of old distempered surfaces of walls including corinces pillars etc and applying one coat of Oil Bound Distemper, all as specified and directed. |
| 22 | M & L for machine cut kota stone slab flooring 20-25mm thick over and includindg 15 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 23 | M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick plaster in cm 1:4 cement screed and jointed complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall tilling including cement mortar beading (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 25 | M & L for glazed ceramic colour tiles in vertical surface of size 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 26 | M&L for glazed ceremic coloured tiles 300 x 200x 7 mm thick (Ist quality) conforming to IS-13753, as in vertical surface such as skirting/dado set in 10mm thick cement plaster in CM 1:4 and pointed in coloured cement to match the surface complete all as specified and as directed. |
| 27 | M & L for 7 to 8 mm thick Non - skid Ceramic colour tiles (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 28 | M&L for Non-skid Ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, In floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 29 | M&L 300x450mm, ceramic vertical 3D tilles, matt/gloss 5mm to 6mm thick with high definition and digitally printed over 10mm thick rendering (1:4) on vertical surface as dedo/skirting set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specefied and directed. |
| 30 | M&L for double charged dark shade Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15 mm thick screed bed in CM 1:6 set and jointed inneat cement slurry and pointed in white or coloured cement to match including dismantling of old tiles and removing the same from site, complete all as specified. |
| 31 | M&L for double charged dark shade Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in dado/skirting etc. and cncluding 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles and removing the same from site, complete all as specified. |
| 32 | Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed |
| 33 | M&L for preparation of existing surface finish of wall and ceilings and applying a two coats of Exterior Weather Emulsion complete all as specified and directed |
| 34 | M&L for removal of exixting treatment of walls including preparation of the surfaces properly and applying two coats of oil bound distemper to achieve smooth surfaces, complete all as specified and as directed |
| 35 | All as per SI item 34 here in before but on ceilings, complete all as specified and directed |
| 36 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.(a)Rendering 10mm thick in Cement Mortar 1:4 on cleaned Concrete surfaces of Roof, finished fair surfaces including curing of plastered surfaces for 7 DAYS by pounding of Water over the Roof (Levelling Course). |
| 37 | Supply and fixing powder coated aluminium grill to windows/ventilators including aluminium 'F' Channel 20 x 20 x 2 mm mm thick, fixed all round of grill complete all as specified and directed. |
| 38 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wir and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 39 | M&L for Sheet glass 4mm thick , ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed. |
| 40 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for door with chowkhat /frame made with aluminium section with size 100x44x2mm thick and shutter of vertical style with section 84x44x2mm thick and top /middle / bottom rails of shutter made with 112x44x2mm thick over and including 5mm thick tinted glass panes, including necessary fixing arrangment ,joining cleats, glazing clips, rubber beading, floor door spring, tower bolts 200mm long, mortice lock 300 mm, 4 lever, rounded handles etc fixed to shutters complete all as specified and directed by engr in charge. |
| 41 | Taking down chowkats or frames with shutter not exc 1.5 sqm each but with shutters (without taking off shutters from the frame), all as directed. |
| 42 | All as per item No 41 but exc 1.5 sqm but n.exec 4sqm each. |
| 43 | S&F in repairs of white colour triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge. |
| 44 | S & F in repairs vitreous china wash down water closet pan (pedestal pattern), including including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.. necessary fittings complete and making good to floor all as specified and directed. |
| 45 | S & F in repair 10 ltrs capacity PVC valveless, symphonic action type, flushing cistern, low level, with inlet ,ball valve, float and handle including flush pipe (long bend) for low level cistern complete all as specified and directed. |
| 46 | Taking down 15 mm dia GI steel tubing and connection including cleaning for re-fixing or removal ,complete all as specified and directed |
| 47 | M & L for GI Tubing 15 mm dia ,medium grade galvanised ,with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and directed. |
| 48 | Taking down 20 mm dia GI steel tubing and connection including cleaning for re-fixing or removal ,complete all as specified and directed |
| 49 | M & L for GI Tubing 20 mm dia ,medium grade galvanised ,with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and directed. |
| 50 | S & F in repair PVC connection of 15 mm dia with PTMT nuts of length 450mm, complete all as specified and directed. |
| 51 | S & F in repair PVC waste pipe 32 mm bore for WHB/Urinal complete all as specified and directed. |
| 52 | S&F in repair vitreous china wash down water closet one piece with integrated cistern, seat cover and twin flush fitting complete all as specified and as directed . |
| 53 | S & F in repairs vitreous china WHB ,white or coloured, size 550 mm x 400 mm with 32 mm dia CP waste coupling and all fittings and fixtures complete all as specified and directed. |
| 54 | S & F as in repair 15 mm dia long body bib cock ,chromium plated, cast copper alloy ,fancy type with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed. |
| 55 | S & F in repairs 15 mm bore pillar taps fancy swan neck type chromium plated screw down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and directed. |
| 56 | S&F in repairs health faucet cock brass chromium plated including 1.5 M long flexible pipe of chromium plated complete all as specified and directed |
| 57 | S & F as in repair 15 mm dia angle cock/stop cock, chromium plated, cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified & directed. |
| 58 | S&F in repair PVC (SWR) pipes single socketed110 mm bore in any length with rubber ring joints fixed to walls including flat iron clamp for proper fixing complete all as specified and directed. |
| 59 | S&F in repair Prelaminated particle 12mmm thick board, exterior grade, prelaminated one side with decorative choice lamination other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 60 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyingPVC solvent cement and screwed with ful body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compessive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardan complete all as specified and directed. |
| 61 | S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC prelaimeted Sheet on the front face & 2mm colour PVC prelaiminated sheet on back face, with particle board supplying & fixing in frame at site as per specification complete all as specified and directed. |
| 62 | S&F aluminium alloy, anodised 250 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 63 | S&F in 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.. |
| 64 | S&F Extruded aluminium alloy 150mm handles, fabricated type, anodised complete all as specified and directed. |
| 65 | S&F butt hinges med weight cold rolled SS 100mm complete all as specified |
| 66 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 67 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 68 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil complete all as specified and directed. |
| 69 | Removing excavated material n exc 50 m and depositing where directed at al level n. exc 1.50 m above the starting point all complete all as specified and directed. |
| 70 | M & L for RCC Nominal Mix type A1 1:1.5:3(20mm graded) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 71 | M & L for RCC Nominal Mix type A1 1:1.5:3(20mm graded) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 72 | M & L for RCC Nominal Mix type A1 1:1.5:3(20mm graded) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 73 | M&L for RCC Nominal Mix type A1 1:1.5:3(20mm graded) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 74 | M&L PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregates) as in copings, ,bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 75 | M and L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and as directed. |
| 76 | M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finish surfaces complete all as specified and as directed. |
| 77 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces complete all as specified and directed. |
| 78 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide , horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces of concrete complete all as specified and directed. . |
| 79 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 80 | M&L Mild steel TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 81 | Filling under floor incl spreading and levelling, watering and well ramming in layers n exc 25 cm thick with excavated material complete all as specified and directed. |
| 82 | M&L for 100 mm thick cement concrete type D- 2, 1:4:8 ( using 40mm graded aggregate) as in sub base complete all as specified and directed. |
| 83 | M & L for precast cement concrete 1:2:4 type B-0 as in louvres and jallies, 25mm thick set in cm 1:4 (mea sured solid), including all mould- ings but excluding frame complete all as specified and directed. |
| 84 | M&L for 30mm thick plain factory made single extruded WPC solid fixed type ventilator with frame size of 75x50mm complete all as specified and directed. |
| 85 | S & F sheet glass, 3 mm thick ordinary quality and glazing with oil putty/fixed with nails complete all as specified and directed. |
| 86 | S & F 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 87 | S & F for 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 88 | S & F for 150 mm long Aluminium handles, cast type, anodised complete all as specified and directed. |
| 89 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth complete all as specified and as directed. |
| 90 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 91 | M & L for rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and directed. |
| 92 | M&L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 93 | M&L for 75 mm thick cement concrete type C- 2, 1:3:6 ( using 40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 94 | M&L for preparing new plastered surface of wall and applying three coats of white wash complete all as specified and directed. |
| 95 | M&L for preparing new plastered surface and applying three coats of white wash on ceilling complete all as specified and directed. |
| 96 | M&L for preparing new plastered surface and applying two coats of cement base paint complete all as specified and directed. |
| 97 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and directed. |
| 98 | S&F vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps,but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper, brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 99 | S&F for Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 100 | S&F Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed. |
| 101 | S&F cabinet mirror of size (500x400) mm complete all as specified and directed. |
| 102 | S&F in repairs toilet paper holder of Chromium plated complete all as specified and directed. |
| 103 | S&F chromium plated soap dish of complete all as specified and directed. |
| 104 | S&F corner glass shelf 300mm (with brass brackets) of complete all as specified and directed. . |
| 105 | S&F 15mm dia 450 mm long PVC connection including 02 Nos union on both ends screwed for iron pipes complete all as specified and directed. . |
| 106 | S&F bib taps 15mm bore, cast copper alloy, chromium plated , fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 107 | S&F stop valve / angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 108 | Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed. |
| 109 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in CM 1:4 complete all as specified and directed. |
| 110 | M&L Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed. |
| 111 | S&F stop valve chromium plated 15 mm bore fency type with long shank and cup (concealed type) complete all as specified and directed. . |
| 112 | S&F for Cast iron (sand cast ) soil ,waste and vent pipe 100 mm dia in any length with or without ears fixed in trenches with cement joint complete all as specified and directed. |
| 113 | S&F for Cast iron (sand cast ) soil ,waste and vent pipe 50 mm dia in any length with or without ears fixed in walls with cement joint complete all as specified and directed. |
| 114 | S&F for Cast iron soil, waste and vent pipes 75 mm dia in any length with or without ears, with cement joints, laid in trenches floors or in wall complete all as specified and directed. |
| 115 | M&L for cast iron floor trap 75 mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 116 | S&F CI bends 100 mm bore (any radius), fitted with oval access doors diminishing pieces or tapers complete all as specified and directed. |
| 117 | S & F 50 mm bore cast iron cowl complete all as specified and as directed complete all as specified and directed. |
| 118 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 119 | S & F 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC Flush pipe complete all as specified and directed. |
| 120 | S & F Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 121 | S&F Ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 122 | S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 123 | S&F for white colour rectangular moulded polyethylene water storage loft 500 ltrs capacity water tank closed top hoisted and fixed in position all as specified complete all as specified and directed. |
| 124 | S&F Low density polyethylene pipes (LDPE) 32mm bore of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 125 | M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for separately as \\"Supply Only\\" complete all as specified and directed. |
| 126 | Supply only WPC confirming to IS-2645-2003 complete all as specified and directed. |
| 127 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as complete all as specified and directed. |
| 128 | Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 129 | M & L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 130 | M&L Concrete bed in PCC 1:3:6 type C2 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 150mm bore of pipe |
| 131 | S&F Reinforced concrete pipes, class NP3, laid and jointed complete with collars 150mm dia complete all as specified and directed . |
| 132 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required |
| 133 | M&L rendering 10mm thick in CM 1:4 on fair face of brick work or concrete surface including finished even and smooth with out using extra cement |
| 134 | M&L Providing precast ce- ment concrete in PCC 1:2:4 type B-1 inlandings, coverslabs (for man holesetc.) chullahhoods, chajjas, water troughs, mangers, shelvesand similar articleswith plain faces |
| 135 | M&Lplain Cement concrete PCC 1:2: 4 type B-2 in surface channels and drains |
| 136 | M&L Providing, cement concrete In PCC 1:3:6 type C-1 in copings, kneelers, apex stones,bed plates, kerbs |
| 137 | Surface dressing of soft/loose soil n exc 15 cm deep all as specified and directed |
| 138 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 139 | Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 140 | M&L Damp proof course 40 mm thick PCC 1:2:4 type B-0 to horizontal or vertical surface including necessary form work complete all as specified and as directed.Note :WPC shall be measured and paid separetely under respective items. |
| 141 | M & L for Formwork to sides and soffits of floor or roof beam, beam hauchings, griders, bressum-mers, lintles, cantilevers shelves including supports overhangs, etc. also splays between floors and beams, etc for rough finished complete all as specified and directed. |
| 142 | M&L for RCC Type B-1(1:2:4) Nominal Mix using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span |
| 143 | M&L for RCC Type B-1(1:2:4) Nominal Mix using 20mm graded stone Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the lik |
| 144 | M&L for rendering 10 mm thick on fair faces of brick or stone masonry in ceiling in CM (1:3) finish fair and even without using extra cement complete all as specified and directed. |
| 145 | Providing and applying plaster of paris putty of 1 mm thickness over on newly plastered surface of wall/celing to prepare the surface even and smooth. |
| 146 | M & L for preparation of new plastred surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer complete all as specified and directed. |
| 147 | M & L preparation of new surfaces and applying three coats of white wash on ceiling with chicken wire if necessary where ever required complete all as specified and directed. |
| 148 | M&L 75 mm thick cement concrete 1:4:8 type D-2 (40 mm garded aggrgate) as in sub base of floor complete all as specified and as directed. |
| 149 | M&L 25 mm thick PCC 1:2:4, type B-1 (using 12.50 mm graded stone aggregate), as in floor complete all as specified and as directed. |
| 150 | M&L for PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement. Diameter of outlet in 75 mm) complete all as specified. |
| 151 | S&F vitreous china Squatting Pan 'Orrisa' pattern 580x440mm size pan white with front or back inlet with integral 'foot rest, incl PVC (SWR) 'P' or 'S' trap 110mm dia & provn of lime concrete bedding and PVC flush pipe complete. |
| 152 | S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed. |
| 153 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position complete all respect as specified. |
| 154 | S&F in repairs fancy type chromium plated bib cock 2-way double handle with flange of Make Prayag Cat No 7612 or equivalent in Cera/Essco. |
| 155 | S&F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets etc including 32mm dia waste coupline complete all as specified and as directed. |
| 156 | S&F PVC waste pipe 32 mm bore for WHB/sink of Make-Prayag Cat Part No 327 or equivalent in Cera/Essco as approved by GE in writing all as specified and directed. |
| 157 | S&F 650x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 158 | Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with CM (1:3), cutting depth not exc 10 cm girth complete all as specified and directed. |
| 159 | S&F gun metal globe or gate valve for 15 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and as directed. |
| 160 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 161 | S&F grating doom 125mm dia with or without waste hole of PTMT. (Mini weight 50 gms) complete all as specified and as directed. |
| 162 | S&F in repairs Soap dish, vitreous china white, approximate size 160x160x90mm all as directed as specified and directed by Engr-in-charge. |
| 163 | S&F of factory made solid PVC door frame (chowkhat) of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. squre tube, S&F in opening as per specification and drawing complete all as specified and as directed. |
| 164 | S&F 75mm size, mild steel butt hinges, medium weight cold rolled complete all as specified and as directed. |
| 165 | S&F aluminium handle cast type anodised, size 100mm long complete all as specified and as directed. |
| 166 | S&F 500 Ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 167 | S&F Ball brass 20mm bore valve, high pressure, with polythelene float & flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and as directed. |
| 168 | S&F 75mm PVC (SWR) pipes(ISI Marked) single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 169 | ditto as item sl No 168 here-in-before but 110mm dia bore |
| 170 | S & F 75 mm bore PVC (SWR) bends and making good in cement mortar 1:4 in wall, complete all as specified and as directed. |
| 171 | S & F 110 mm bore PVC (SWR) bends and making good in cement mortar 1:4 in wall, complete all as specified and as directed. |
| 172 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 173 | Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash complete all as specified and directed. |
| 174 | M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc suitable for mounting modular switches including modular metal flush boxes and modular face/ cover plate as per site requirement for fixing of modular switches / sockets, fan regulators, including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following :- For one light, fan, exhaust fan call bell. |
| 175 | -Ditto- all as per item No 174 here-in-before but For one socket point controlled by one switch on independent board. |
| 176 | -Ditto- all as per item No 174 here-in-before but For one socket point controlled by one switch on same board. |
| 177 | All as per item No 174 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead. |
| 178 | M & L, modular switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified. |
| 179 | M & L, modular switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified. |
| 180 | M&L, modular socket outlet 5 pin, 5 Amps flush type white finish complete all as specified. |
| 181 | S&F, mosular socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified. |
| 182 | S&F, in replacement, ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and as directed. |
| 183 | S&F, in replacement, modular electronic , rotary, 5 speed step type regulator,2 module 120-230 V white finish complete all as specified. |
| 184 | S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed. |
| 185 | Supply and fixing in replacement TPN DB's 4 way vertical type 415 V, double door suitable for housing of 125 Amps MCCB as main incoming complete all as specified and directed. |
| 186 | Supply & fixing, testing and commissioning in replacement of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs fixed in repairs complete all as specified & directed. |
| 187 | -Ditto- all as per item No 186 but of SPN 40 Amps. |
| 188 | S & F MCCB 125 Amps capacity, 4 pole, 16 KA, fixed thermal and magnetic release complete with extended terminals to be fixed in 8 way TPN DB complete all as specified and directed. |
| 189 | S&F in replacement modular sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete fixed properly on in concealed position complete all as specified and directed. |
| 190 | Supply and fixing exhaust fan of 300mm sweep including making necessary electrical connection complete all as specified and as directed. Note : Old exhaust fan will be deposited to MES store yard |
| 191 | Supply and fix BLDC ceiling fan in replacement, 1200 m sweep, rated input power of 30-35 watt, 350 RPM, air delivery of 225 CMM, rated voltade of 220-240 V, 50 Hz. Complete with down rod and necessary wiring connection from ceiling rose, all as sepcified and directed by engineer in charge.Note : Old fans shall be deposited to MES store |
| 192 | M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in new PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor along with PVC conduit will be measured and paid as one unit length |
| 193 | M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in new PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor along with PVC conduit will be measured and paid as one unit length. |
| 194 | M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor along with PVC conduit will be measured and paid as one unit length.item. |
| 195 | M & L energy saving LED 4ft Batten 20 Watt with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV . The luminaire shall have a rate system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded aluminium batten with a PC glossy diffuser. |
| 196 | M & L energy saver LED Smart Batten fitting 10 watt, 230 Volts, Box type. etc and accessories, including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV bracket with sketch fitting all all as directed. |
| 197 | S&F in replacement complete for recess mounting LED Panel 600x600 mm fittings made of CRCA powder coated finish LED used shall be SMD type and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 system wattage 31 - 36 watt complete electronic drivers with all internal electric connections complete all as specified. |
| 198 | M&L in replacement for LED Building Security Light 70 watt orf alumenium PDC housing glass cover with IP 66 protection all as specified and directed complete including taking down old unserviceable fitting . |
| 199 | Supply and fixing LED post top, 35 watt made in Pure polyester UV resistant powder coated die-cast aluminium with PMMA clear diffuser for uniform illumination and prewired with all accessories complete including all electrical connection. |
| 200 | Supply, installation of perforated GI cable tray 2mm thick, 150 mm wide and 100mm height inclduing laying of eixsting LT cable of any size and any capacity with fixing accessories complete all as directed by Engr-in-Charge. |
| 201 | All as per item No. 200 above but One ceiling fan/exhaust fan control by one switch |
| 202 | All as per item No. 200 above but One 3 pin 5 amps socket outlet on the same board with other switches |
| 203 | S&F of switch Piano, 6 Amp, one way complete all as specified. |
| 204 | Supply and fix ceiling rose three terminal |
| 205 | S&F of socket outlet, 3 pin, 6 Amp, shuttered complete all as specified and directed. |
| 206 | S&F of socket outlet, 3 pin, 6/16 Amp, shuttered complete all as specified and directed. |
| 207 | S&F of switch , 16 Amp, one way complete all as specified and directed. |
| 208 | Supply and fixing in repair LED batten 9w with aluminium housing and integrated electronic driver complete all as specified and directed. |
| 209 | M&L complete motor assembly of air circulating / ventilator (plastic type) of size 250 mm (10'') complete making all connection from ceiling rose to fans complete all as specified and directed. |
| 210 | S&F of double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed. |
| 211 | Supply & fixing, testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs fixed in repairs complete all as specified & directed. |
| 212 | -Ditto- all as per item No 211 but of SPN 32 Amps. |
| 213 | Supply, laying, jointing and leakage testing of GI pipe of size 20 mm medium grade including supply & fixing of all fittings such as bend, tee, elbow, union, reducer etc. laid in trenches/ floor/ walls etc. |
| 214 | Supply & fixing of Gun metal Gate valve ISI marked with iron wheel, head screwed both ends for each galvanized iron pipe of sizes 20 mm bore complete all as specified and directed. |
| 215 | M&L for cutting of existing GI pipe of 25 mm bore, insertion of Tee 25 x 20 mm for connection to 20 mm GI pipe, complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender