Tender For Provision Of Compound Wall Alongwith Chain Link Fencing With Motorised Steel Gate At Sensitive Location At Hq Cif (K) Under Age (I) Cif (K)
Tender Value
32.46 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
25 days left
EMD
64940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Compound Wall Alongwith Chain Link Fencing With Motorised Steel Gate At Sensitive Location At Hq Cif (K) Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | Site clearance in any type of soil including cutting of shurbs, grass etc complete all as specified and directed. |
| 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation etc not exceeding 10 sqm in plan and and getting out in any type of soil complete all as specified and directed. |
| 4 | M&L cement conncrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concreting complete all as specified and directed. |
| 5 | M&L brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:4 complete all as specified and directed. |
| 6 | M&L RCC M-25 (using 20mm graded crushed stone aggregate) design mix as in tie beams or lintel over 1.5m span etc complete all as specified and directed. |
| 7 | Use and waste of form work with Rough finished flat surfaces to sides of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete all as specified and directed. |
| 8 | M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 9 | Description all as per item No 8 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed. |
| 10 | M&L cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, neelers, apex stones, bed plates, kerbs not provided for in Item, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 11 | M&L 15mm thick rendering in CM 1:4 on external surfaces of brick work including 5mm thick floating/setting coat, finishing the surface even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistance primer paint complete all as specified and directed. |
| 13 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick by using any type of soil as in low lying areas complete all as specified and directed. |
| 14 | Removing surplus excavated material to a distance exceeding 250m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 15 | M&L RCC columns for motorised steel gate, excavation in any type of soil, removal of surplus spoil upto 500m, returning filling, PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate), brickwork in cement mortar (1:4), rendering in cement mortar (1:4), PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in block/coping complete all as specified and shown on drawings. |
| 16 | S&F Steel RHS/SHS in chain link fencing of FE-410 W(Gde-E-250 Quality A) and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 17 | Excavation in post holes each not exceeding 0.50 cum, getting out in any type of soil, returning filling in and ramming earth or broken rubble mixed with earth in layers not exceeding 25cm in any type of soil complete all as specified and directed. |
| 18 | M&L cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and directed. |
| 19 | Supply only chain link fencing (coloured) weight not exceeding 4 Kg/sqm complete all as specified and directed. |
| 20 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 21 | M&L MS angle iron, flat iron confirming to Fe-290- Gde E-165 as in post as directed, drilling holes, notching for wire etc cutting and twisting necessary drilling bolting and riveting or welding including FI 40 x 6mm etc and similar works complete all as specified and directed. |
| 22 | S&F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washer and one hexagonal or square nut length of bolt exceeding 5cm but not exceeding 10 cm long dia of neck 5 to 10mm complete all as specified. |
| 23 | Preparing new steel iron surfaces of any description, over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 24 | Construction/fabrication/fixing of Motorised Steel Gate with safety sensor 1 pair with heavy duty motor and extra gear racks complete all as specified and directed by AGE(I) CIF(K) and as shown in drawings. The specification, quantity , Hardware and Accessories to be used in the work will be complete all as specified and shown on drawings. |
| 25 | Supply, laying, jointing, testing and commissioning of cable XLPE Insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cable (heavy duty) 1100 Volts grade with stranded aluminuim conductor of size 16 Sqmm 4 core, complete all as specified and directed. |
| 26 | Supply, laying, jointing, testing and commissioning of cable XLPE Insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable( heavy duty) 1100 Volts grade with stranded aluminuim conductor of size 10 Sqmm 2 core complete all as specified and directed. |
| 27 | Supply and laying brick of conventional size 230x110x75mm locally available as protection of cable in trenches complete all as specifed and directed. |
| 28 | S&L dry river sand laid in trenches 5cm below the cable and 13 cm above the cable in trenches as cable cushioning and covering complete all as specified and directed.Note : Punned thickness shall be measured for payment purpose. |
| 29 | M&L Cutting through existing road surfaces PCC etc, and making trench of minimum 45 cm wide 60 cm in depth along the cross section of road for laying of pipes or underground cables, including returning filing in well ramming and removal of surplus soil to a distance not exceeding 50 mtrs and repairs to road surfaces to match with existing specification after laying the pipes/cable etc. complete all as specified and directed. |
| 30 | S&F 40mm bore Galvanised iron tubing light grade for cable protection with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 31 | Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp including necessary cable connection and conduit from junction box to light fitting complete all as specified and directed. |
| 32 | M&L earthing complete with galvanised steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25mtr below normal ground level) with top edge of plate not less than 1.5mtr below normal ground level connected to and including GI earth lead 4.0 mm dia by means of nuts and bolts, check nuts and washers of galvanised steel including PCC pit of 1:2:4 type B-1 cover reinforced with XPM weight not less than 4Kg/Sqm and 6mm dia bar handle, excavation and earth work in hard/dense soil, charcoal dust salt, medium grade GI watering pipe of 20mm dia with funnel and wire mesh and light grade GI protection of 40mm bore from top edge of earth plate upto main distribution board to main switch board all as specified and testing on completion. Note : Item of earthing includes cost of 7.5m long galvanised iron earth lead 4.0 mm dia and protection pipe of 40mm bore light grade. |
| 33 | M&L junction box made out of 1.2 mm thick CRCA sheet of suitable size incl 04 nos aluminium busbar of size 20 x 3 mm thick mounted on insulators and one MCB SP 6 amps etc having provn of cable glands for incoming and outgoing cables, fixed to wall and painting complete all as specified and directed. |
| 34 | S&F LT panel board outdoor type double door cubical type, slopy roof, front back both side opeing, padestal mounted of suitable size CPRI approved, IP-54 having independent compartment for bus bar, incoming feeder to accomodate MCCB and each out going feeders dust and vermin proof and lockable, factory made, fabricated out of 3.15mm thick CRCA sheet sutable for 3 phase 415 Volts 50 HZ, AC supply , bus bar chamber with Aluminium bus bar of 150 Amps rating for 3 phase and bus bar of same capacity for neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators -01 set incl necessary copper cables of suitable size for MCCBs/inter connections, common earth bus bar of GI strip 32x6 mm at bottom with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and out going all accessaries(a) MCCB 4 pole 63 Amp 16 kA - 01 No. (b) MCCB 3 pole 63 Amp 16 kA - 01 No(c) MCB SPN 32 A - 03 Nos. |
| 35 | Notes :-An amount of Rs. 6580.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender