Tender For Renovation Work Of K.C.R. Hall At Electrical Engineering Building, Jadavpur University Main C Us.
Tender Value
13.50 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
31900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work Of K.C.R. Hall At Electrical Engineering Building, Jadavpur University Main C Us.
BOQ
| Sl. No. | Item Description |
| 1 | Stripping off worn out plaster and raking out joints …………………… lead of 75m as directed.[Page No-11 Item No. 10] |
| 2 | Cleaning the Concrete surface by removing dirt and debris marking defective locations ……… of theEngineer- in-Charge. [ Page No-45 Item No. 5 ] |
| 3 | Cleaning the exposed reinforcement preferably upto fulldiameter ………… as per manufacture specification.[Page No- 45 Item no-6 ] |
| 4 | Applying epoxy based reactive joining agentfor joining the old concrete with fresh concrete ………… specified time as per manufacturersspecification. (0.4 Kg / m² of concrete surface).[ Page No-45 Item No-7 ] |
| 5 | Cement concrete ( 1:1.5:3 ) with graded stone chips 6 mm… the Engineer -in -Charge.(b) 25 mm thick[ Page No-40 Item No-27 (b) ] |
| 6 | (c) 37.5 mm thick[ Page No-40 Item No-27 (b) ] |
| 7 | Applying two coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion.[ Page No-45 Item No-8 ] |
| 8 | Plaster (to wall ,floor, ceiling etc.) with sand cement …. where necessary (ground floor)(i) with 1:4 cement mortar(a) 20 mm thick plaster [ Page No-189 Item No-1 (i) (b) ] |
| 9 | M.S structural works with hollow section (square orrectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another ……… erectionall complete.i) For roof truss works.a) Span up to 12 Mtr.[ Page No-101 Item No-2A (i) (a) ] |
| 10 | Weiding in M.S structural work with gas or electric.(a) Tack weld [ Page No-81 Item No-31 (a) (b)] |
| 11 | (b) Continuous weld[ Page No-81 Item No-31 (a) (b)] |
| 12 | M.F suspended ceiling made with 12.5 mm thick Gypsumplaster board including G.I perimeter channel of 0.55 mmflush ……… as per the direction of Engineer- in- charge.[Page No- 165 Item No-17 ] |
| 13 | Supplying, fitting & fixing OW Acoustic Board (mineral Fibre Acoustic Ceiling Tiles) of approved patern and size 595 mm x 595 mm with………as per drawing & drawing & direction of Engineer-in-Charge.False Celing with(i) 15mm thick OW Acoustic Board /Tiles[Page No- 171 Item No-23 B. d) ] |
| 14 | Wall paneling with Gypsum Plaster Board of 12.50 mmthick fitted to G.I channel of ……… as per direction of the Engineer-in-charge.[Page No- 181 Item No-19) ] |
| 15 | A) Supplying & laying of approved brand of scrach proof,semi flexible P.V.C. blended homogeneous marble Vinyle flooring …………. of the Engineer-in charge.2mm thick [ Page No-76 Item No-1(A) ] |
| 16 | Supplying,fitting and fixing boiling water resistant plyconforming to IS:303-1989 bonded with ………… direction of Engineer-in-Charge.(iii) 9mm[Page No- 173 Item No-3 (ii) ] |
| 17 | (vi) 19mm[Page No- 173 Item No-3 (ii) ] |
| 18 | Supplying fitting,fixing decorative lamination conformingto IS: 2046 : 1995 as per approved make, brand ………..…… as per direction of Engineer-in-Charge.(i) Thickness of laminate 1.5 mm[Page No- 179 Item No-14 (i) ] |
| 19 | Supply of Mazdoor (male) for materials shifting Perpose.[ Page No-303 Item No-3 ] |
| 20 | Supply of Carpenter for repairing work.[ Page No-303 Item No-5 ] |
| 21 | Supply of Carpenter (Helper) for repairing work.[ Page No-303 Item No-7 ] |
| 22 | (a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc .…… smoothening surfaces by sand papering etc.[Page No. 200 Item No. 1 (b)(a)] |
| 23 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc .…… smoothening surfaces by sand papering etc.[Page No. 200 Item No. 1 (b)(a)] |
| 24 | Painting Best Qlty. syanthetic enamel paint of approved Qlty …… if necessary.(a) On timber or Plaster Surface.Two Coats.[Page No. 200 Item No. 2(a) (b)] |
| 25 | (b) On steel or other metal Surface.Two Coats[Page No. 200 Item No. 2(a) (b)] |
| 26 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface or new surface to ……… of the EIC.( In Ground Floor ) One Coat(i) Water based interior grade Acrylic Primer[ Page No- 195, Item No- 7 (a)] |
| 27 | Acrylic Emulsion Paint of approved make and brand onwalls and ceiling ………… including putty.( Two coats ) (i) Standard Quality[ Page- 196, Item No-10 ] |
| 28 | Making one set of scaffolding only for replacing glasspanels, painting, uprooting plant ………… of the Engineer-in-charge.(a) 3.90 metre hight[ Page No-23 to 24 Item No-3(a)] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender