|
| 1 | DESCRIPTION OF WORK :- |
| 2 | Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer Incharge upto a distance of 30m from the foundation trenches by Hydraulic excavator/manual means. SI No. 254 |
| 3 | Cement Concrete in 1 : 4 : 8 (One Cement, Four coarse sand & eight graded stone aggregate 40mm nominal size) and curing complete, including cost of form work in foundation. SI.No. 275(a) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-100 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) As Per SOR Ch 6 Sr No. 1(6.1.1) |
| 5 | M-100 Brick work in 1:4 (One cement & Four Coarse sand) mortar in superstructure l/c all material labour T&P etc. complete. DSR Sp No. 6.4.1 Ch. 6 |
| 6 | 12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) (II) 1:4 (1 cement : 4 Coarse sand) As Per SOR Sr.No. 1 SI No. 584 |
| 7 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Including cost of all material, Labour, T&P etc. complete required for proper completion of the work. As Per Sor Ch. 15 Sr.No. 6 |
| 8 | Finishing walls with Acrylic Smooth exterior paint (Apex) of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) SI.No. 21 Chap 15 |
| 9 | Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm, joints mitred and welded by angle iron 35×35×5 mm or 35×5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (Railing&Gate) As per SOR Ch 10 Sr No 12- Railing |
| 10 | Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. S.l.No. 279 |
| 11 | Supply and fixing of Outdoor Children Swing Children jhula including all cost of material and labour T & P etc. complete as per direction of E/I. MR |
| 12 | Supply and fixing of Fiberglass straight kids outdoor playground slide, Incluing all cost of material and labour T & P etc. complete as per direction of E/I. MR |
| 13 | Disposal of surplus excavated earth rubbish, Malba etc. by mechenical transport complete as per direction of E/I up to any lead and lift. As Per SOR Sr. No. 10 |
| 14 | Excavating, supplying and filling of local earth by mechanical transport upto a lead upto 5Km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. Sr. No. 8 |
| 15 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge As Per DSR Horticulture 2.34 |
| 16 | Construction of Podium with brick work and Plaster in 1:4 Cement mortar for enogration with black granite stone 2'x2.5' including engraving of proper language all complete. as per direction of Engineer in charge |
| 17 | Painting on Steel/G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. As Per Ch-15-5(13.53.1) |
| 18 | Providing, laying spreading & compacting of granular sub-base by providing well graded (Gr-1) materials, spreading in uniform layers with Motor Grader on prepared surface on prepared surface, mixing by mix in placed method with Rotovator at OMC and compacting with in layers with smooth wheeled Vibratory Roller to achieve the desired density, complete as per MORD clause 401.1 & as directed by Engineer Incharge including all machinery charges & including all labour, T&P etc required for proper completion of the work. |
| 19 | Laying of I shaped precast Interlocking tiles of thickness 80 mm (Rubber moulded Gray) (Compressive strength not less then 30Mpa and weight 4.50Kg.) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. |
| 20 | Providing and fixing 18 mm thick Granite (gang saw cut), mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand). Joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high glossy finish etc. complete at all levels. As Per CH 14 Sr. 8 |
| 21 | GST Please Enable Macros to View BoQ information |
