Tender For Earthwork And Khadanja From Naugaza Peer To Dehradun Road And Ambala Road To Nakud Chowki Bericating And Kawad Shivir Mitti Kawad Yatra 2026
Tender Value
14.96 Lakhs
Estimated cost
Bid Submission
03 Jul 2026
2 days left
EMD
1.49 Lakhs
Bank guarantee accepted
Document Fee
1298
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Earthwork And Khadanja From Naugaza Peer To Dehradun Road And Ambala Road To Nakud Chowki Bericating And Kawad Shivir Mitti Kawad Yatra 2026
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in filling with cartage 8.0 km from site i/c all comp of work. |
| 2 | (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. |
| 3 | Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour, T&P etc. required for proper completion the work |
| 4 | Construction of Granular sub- base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in lace method with rotavator of OMC, and compacting with vibratory power roller to achive the desired density, complete (As per clause 401 RA) |
| 5 | M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material, labour, T&P etc. required for proper completion of the work. |
| 6 | Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. |
| 7 | 12 mm thick plaster with cement and approved c sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. |
| 8 | Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. |
| 9 | Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer in charge. For two days. |
| 10 | Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer in charge. but for more than 02 days. |
| 11 | Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8\\") depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. |
| 12 | R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in slab/ nall with all comp of work |
| 13 | M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. Quntity same as per above item |
| 14 | Add 18%GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 days