|
| 1 | Operation and maintenance of disposal including panel, transformer, dgset, motor pump set, cables and wiring, maintenance of delivery line and desilting of sump complete in all respect as per satisfaction of Engineer-in-charge. |
| 2 | Hiring and operation charge of suction tanker for bailing out rain water from various water logging point including cost of fuel, driver and helper etc. complete in all respect. |
| 3 | Supply of 125 KVA Capacity DG Set on monthly hire basis. (Without Fuel and operator). |
| 4 | SITC of main incomer VCB of 1000A, 11 KV rating complete in all respects as per specifications to feed individual Transformers through the VCB - Type: Vacuum Circuit Breaker - Rating: 800A/1000A, 3P, 415V/33kV - Breaking Capacity: 25kA/40kA/50kA - Operating Mechanism: Spring/Solenoid operated - Protection: Overload, Short Circuit, Earth Fault - Features: - Vacuum interrupter- Low maintenance - High reliability - Compact design - Standards: IEC 62271-100, IS 13118make: Schneider, ABB and CGL |
| 5 | SITC of main incomer VCB of 800A, 11 KV rating complete in all respects as per specifications to feed individual Transformers through the VCB - Type: Vacuum Circuit Breaker - Rating: 800A/1000A, 3P, 415V/33kV - Breaking Capacity: 25kA/40kA/50kA - Operating Mechanism: Spring/Solenoid operated - Protection: Overload, Short Circuit, Earth Fault - Features: - Vacuum interrupter- Low maintenance - High reliability - Compact design - Standards: IEC 62271-100, IS 13118 make: Schneider, ABB and CGL |
| 6 | Providing, laying, aligning, and jointing 1200 mm diameter (i/d) M.S. pipe having 12 mm wall thickness, fabricated as per IS:3589 (2001) from Fe-330 grade steel plates conforming to IS:2062 and manufactured by approved makes such as TATA, Jindal, or ESL. The work includes cutting, leveling, grinding, and jointing of the pipes by welding. The internal surface and outer surface of the pipe shall be coated with a minimum 200-micron thick food-grade epoxy lining complete in all respects as per specifications and as per the direction and to the entire satisfaction of the Engineer-in-Charge. |
| 7 | Providing, laying, aligning, and jointing 700 mm diameter (i/d) M.S. pipe having 10 mm wall thickness, fabricated as per IS:3589 (2001) from Fe-330 grade steel plates conforming to IS:2062 and manufactured by approved makes such as TATA, Jindal, or ESL. The work includes cutting, leveling, grinding, and jointing of the pipes by welding. The internal surface and outer surface of the pipe shall be coated with a minimum 200-micron thick food-grade epoxy lining complete in all respects as per specifications and as per the direction and to the entire satisfaction of the Engineer-in-Charge. |
| 8 | Providing, laying, aligning, and jointing 600 mm diameter (i/d) M.S. pipe having 10 mm wall thickness, fabricated as per IS:3589 (2001) from Fe-330 grade steel plates conforming to IS:2062 and manufactured by approved makes such as TATA, Jindal, or ESL. The work includes cutting, leveling, grinding, and jointing of the pipes by welding. The internal surface and outer surface of the pipe shall be coated with a minimum 200-micron thick food-grade epoxy lining complete in all respects as per specifications and as per the direction and to the entire satisfaction of the Engineer-in-Charge. |
| 9 | Providing, laying, aligning, and jointing 350 mm diameter (i/d) M.S. pipe having 8 mm wall thickness, fabricated as per IS:3589 (2001) from Fe-330 grade steel plates conforming to IS:2062 and manufactured by approved makes such as TATA, Jindal, or ESL. The work includes cutting, leveling, grinding, and jointing of the pipes by welding. The internal surface and outer surface of the pipe shall be coated with a minimum 200-micron thick food-grade epoxy lining complete in all respects as per specifications and as per the direction and to the entire satisfaction of the Engineer-in-Charge. |
| 10 | Providing and Fixing of MS Flange dia. 200mm , 12 mm thick complete in all respect. |
| 11 | Providing and Fixing of MS Flange dia. 300mm , 12 mm thick complete in all respect. |
| 12 | HSR Items- Master Drainage Scheme Faridabad:- Upgradation of Machinery, Delivery lines, NRV, Sluice Valve etc. on existing disposal i.e. Sec-21A, Alson Chowk, Sec-55 and additional arrangements for dispose the storm water along sec-23/24 dividing roads and installation of motor pump set at MPS Partapgarh along with delivery line up to Gurgaon Canal for early disposal of rain water and all other work contingent thereto. Please Enable Macros to View BoQ information |
