|
| 1 | Hopping See Saw AREA : 2.0 M X 0.5 M HEIGHT : 1.0 METER LEG SUPPORT : 60MM ODMS HAND RAILING : 32MM ODMS BASE : MS ANGLE 35 x 35x 5 PAINT &COATING : 2 Layers Of Reputed Make Paint Or Oven Baked Powder Coating Whichever Is Feasible. |
| 2 | FRP Pyramid SwingAREA : 3.0 M X 4.6 M HEIGHT : 3.96 METER TOP BAR : 60MM/ 75MM/ 90MM ODMS LEG SUPPORT : 60MM/ 75MM/ 90MM ODMS HORIZONTAL SUPPORT : 32 MM ODMS SWING SEATS : 2 NOS FRP SEAT 5MM THICK ACCESSORIES : 4 NOS. SWING CLAMP / GI CHAIN 8MM PAINT & COATING : 2 Layers Of Reputed Make Paint Or Oven Baked Powder Coating Whichever Is Feasible |
| 3 | BIKE RIDERAREA : 0.75 M X 0.3 M HEIGHT : 0.75 METER STAND : 90MM ODMS SINGLE POLE HANDLE : 25MM ODMS SEATING ARRANGEMENT : PLY WITH FRP LAMINATION MOVEMENT &BALANCING : BIG SPRING. BASE PLATE : MS SQUARE PLATE 7”x 7” – 5MM PAINT &COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE. |
| 4 | Orbit ClimberAREA : 2.4 M X 1.2 M HEIGHT : 2.4 M VERTICAL SUPPORT : 60MM ODMS LADDER : 25MM ODMS GLOBE : 40MM ODMS INNER FRAME : 32 MM ODMS PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 5 | Rotary Thrill MGRAREA : 1. 5 M DIAMETER TOTAL HEIGHT : 1. 0 M FOUNDATION PIPE : 40MM ODMS CENTRE PIPE : 60MM ODMS CONNECTING SUPPORT : 32MM ODMS HANDLE : 25MM ODMS SEATS : FRP SEATS 3 MM THICK BEARING : HEAVY DUTY BALL BEARING (6312) PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 6 | Twister ClimberAREA : 2.1 M X 2.4 M HEIGHT : 2.1 M CENTER SUPPORT : 90MM ODMS VERTICAL SUPPORT : 40MM ODMS OUTER FRAME : 48 MM ODMS LOOPS FRAME : 32 MM ODMS PAINT &COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE. |
| 7 | Small MGR PlatformAREA : 1. 2 M DIAMETER TOTAL HEIGHT : 1. 0 M FOUNDATION PIPE : 40MM ODMS CENTRE PIPE : 60MM ODMS OUTER FRAME : 32MM ODMS HANDLE : 25MM ODMS BASE & SEATS : MS SHEET 18 GEJ BEARING : HEAVY DUTY BALL BEARING (6312) PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 8 | Duck MGRAREA : 1. 5 M DIAMETER TOTAL HEIGHT : 1. 0 M FOUNDATION PIPE : 40MM ODMS CENTRE PIPE : 60MM ODMS CONNECTING SUPPORT : 32MM ODMS HANDLE : 25MM ODMS SEATS : FRP DUCK - 4 NOS. BEARING : HEAVY DUTY BALL BEARING (6312) PAINT &COATING :2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE. |
| 9 | Mountain ClimberAREA : 2.1 M X 2.1 M HEIGHT : 3.0 METER LEG SUPPORT : 48MM ODMS OUTER FRAME ( RINGS) : 32 MM. ODMS PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 10 | Rubber Belt Arch SwingAREA : 3.0 M X 1.5 M HEIGHT : 2.4 METER TOP BAR : 60MM ODMS LEG SUPPORT : 60MM ODMS HORIZONTAL SUPPORT : 32MM ODMS SWING SEATS : RUBBER BELT SEATS 9MM THICK ACCESSORIES : SWING CLAMP / “S” HOOK / GI CHAIN 8MM PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 11 | FRP Slide 10 Ft.AREA : 4.2 M X 0.6 M. SAFE AREA : 5. 2 M X 1.6 M. PLATFORM HEIGHT : 1.5 M SLIDE LENGTH : 3.0 M SLIDE THICNKESS : 5 MM LEG SUPPORT : 48 MM ODMS PIPE LADDER & RAILING : 20MM & 25MM ODMS LADDER STEPS : 2 “ x 1” RECTANGLE PIPE SQ. PLATFORM : 2’ X 2 ‘ SIZE MADE WITH MS SHEET 18 GUAGE & MS ANGLE 25*25*3 SUPPORT PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 12 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and removing from the site. |
| 13 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 14 | Grubbing up tree trunk including of trunk portion protrruding over ground digging out roots. Fillings holes and levelling off ground etc. |
| 15 | Demolition of brick work and removing from site. |
| 16 | Demolition of Cement Concrete and removing waste malba. |
| 17 | Excavation over and area n exc 1.5 mtr deep and getting out loose soil and removing from site. |
| 18 | Cement concrete in foundations, filling and mass concrete (1:2:4) |
| 19 | Cement concrete in foundations, filling and mass concrete (1:4:8, 40 mm graded agreegate) |
| 20 | Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 |
| 21 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 22 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 23 | Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors |
| 24 | Screed bed or beddinglayer of mortar 15 mm thick for laying floor finishes |
| 25 | Painting brick, stone, concrete or plaster surfaces of any descriptions over 10 cm grith or width including prepration, priming paint plaster, synthetic enamel. Please Enable Macros to View BoQ information |
