Tender For Permanent Restoration/Construction Of Protection Work, Providing Laying Fitting Of Di/Gi/Hdpe Pipes In Gravity Main, Sub Main And Distribution Systems Of Various Water Supply Schemes Water Supply Scheme Puneja, Water Supply Scheme Bhaderwa, Doda-Jammu And Kashmir

TDR : 56107789

Tender Notice
BOQ

7 Days Left

Doda , Jammu and Kashmir

Tender Brief : Tender For Permanent Restoration/Construction Of Protection Work, Providing Laying Fitting Of Di/Gi/Hdpe Pipes In Gravity Main, Sub Main And Distribution Systems Of Various Water Supply Schemes Water Supply Scheme Puneja, Water Supply Scheme Bhaderwa

Document Fees
₹ 500 /-

EMD
₹ 49300.0 /-

Tender Value
₹ 24.62 Lakhs /-

Submission Date
29-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by Engineer incharge in all kind of soil.
2	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by Engineer incharge in ordinary rock.
3	Earth work in excavation by manual means over areas (exceeding 30cm and upto 1.5mtr in width as well as 10 Sqm on plan) including disposal of excavated earth upto 1mtr. for cutting edge, disposed earth to be levelled & neately dressed in all kind of soil.
4	Supply of stone nallah (stacking size 225mm by measured. & reduced by 15%) & dumping and filling of stone in horizontal on level.
5	Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggr. 40mm nominal size.
6	Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggr. 20mm nominal size).
7	Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggr. 20mm nominal size).
8	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
9	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
10	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
11	Steel Reinforcement for RCC work incl. straighening, cutting, bending, placing in position & binding all complete upto plinth level TMT bars.Fe 500.
12	Centring and shuttering including strutting, propping etc.and removal of form work for foundation, footings, bares of column etc. for mass concrete.
13	Extra for shuttering in circular work in walls (any thickness.) incl. attached pilasters, buttresses, plinth & string courses.
14	supply of cover L.D Rectangular 455 x 610 mm with frame including fixing etc.
15	Dry random rubble masonry with hard stone in foundation and plinth without bond stone.
16	Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand).
17	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge 15 mm to 40 mm nominal bore.
18	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge above 40 mm nominal bore.
19	Filling available excavated earth ( excluding rock) in trenches, plinth side of foundationetc. In layer not excedding 20cm in depth , lead upto 50mtr and lift upto 1.5mtr
20	Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 200 mm dia Ductile Iron Class K-9 Pipes.
21	Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 150 mm dia Ductile Iron Class K-9 Pipes.
22	Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 20mm ϕ
23	Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 50mm ϕ
24	Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 65mm ϕ
25	Laying and fitting of HDPE pipes 40mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
26	Laying and fitting of HDPE pipes 50 mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
27	Laying and fitting of HDPE pipes 63mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
28	Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket100 mm dia pipes.
29	Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket150 mm dia pipes.
30	Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket200 mm dia pipes.
31	Provididng Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe).
32	Providing and laying D.I. Specials of Class K-12 suitable for mechanical jointing as per IS : 9523 upto 600 mm dia.
33	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm nominal bore.
34	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20 mm nominal bore.
35	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 25 mm nominal bore.
36	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 32 mm nominal bore.
37	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 40 mm nominal bore.
38	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 50 mm nominal bore.
39	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 65 mm nominal bore.
40	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 80 mm nominal bore.
41	Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 25 mm dia
42	Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm dia
43	Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm dia
44	Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 65 mm dia
45	Making connection of GI distribution branch with GI main of following sizes by providing and fixing Tee, union etc, including cutting and threading the pipe etc. complete 25 to 40 mm nominol bore
46	Fitter engage for retrieving of damages pipes, bending straightening, cutting of pipes, & locating, tracing, blockages of pipes including rethreading of pipes etc.
47	Labour engage for retrieving of damages pipes, bending straightening, cutting of pipes, & locating, tracing, blockages of pipes including rethreading of pipes etc.
48	Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etc complete.
49	Carriage of D.I pipes by Mechanical Transport including loading unloading & stacking from Procurment Jammu to road side of work average distance 230 Km.
50	Carriage of D.I pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 05 Km.
51	Carriage of G.I pipes by Mechanical Transport including loading unloading & stacking from Procurment Jammu to road side of work average distance 230 Km.
52	Carriage of G.I pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 0.50 Km.
53	Carriage of HDPE pipes by Mechanical Transport including loading unloading & stacking from Procurment Jammu to road side of work average distance 200 Km.
54	Carriage of HDPE pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 03 Km.
55	Carriage of Cement & steel by Mechanical Transport including loading unoading & stacking from nearest market place (To be identified by engineer in charge) to road side of work at an A) average distance 25 km.
56	B) average distance 35 Km.
57	Carriage of cement by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work A) average distance 05 Km.
58	B) average distance 03 Km.
59	Carriage of steel by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 05 Km.
60	Carriage of Sand & stone aggrigate upto 40mm nominal size (crshed) by Mechanical Transport including loading unoading & stacking from source (To be identified by engineer in charge) to road side of work at an A) average distance of 35 km.
61	B) average distance 45 Km.
62	Carriage of Sand and stone aggrigate up;to 40mm by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work at anA) average distance 05 Km.
63	C) average distance 03 Km.
64	Carriage of stone aggrigate above 40mm nominal size (crshed) by Mechanical Transport including loading unoading & stacking from source (To be identified by engineer in charge) to road side of work at an average distance of 45 km.
65	Carriage of stone aggrigate above 40mm nominal size (crshed) by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work at an average distance 03 Km.
66	Carriage of stone by Manual means including loading unloading & stacking from source (to be identified by Engineer in charge) to site of work at an average distance 01 Km. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu and Kashmir Tenders

Construction Tenders

Pipe Line Project Tenders

Pipe Laying Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Permanent Restoration/Construction Of Protection Work, Providing Laying Fitting Of Di/Gi/Hdpe Pipes In Gravity Main, Sub Main And Distribution Systems Of Various Water Supply Schemes Water Supply Scheme Puneja, Water Supply Scheme Bhaderwa, Doda-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by Engineer incharge in all kind of soil.
2	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by Engineer incharge in ordinary rock.
3	Earth work in excavation by manual means over areas (exceeding 30cm and upto 1.5mtr in width as well as 10 Sqm on plan) including disposal of excavated earth upto 1mtr. for cutting edge, disposed earth to be levelled & neately dressed in all kind of soil.
4	Supply of stone nallah (stacking size 225mm by measured. & reduced by 15%) & dumping and filling of stone in horizontal on level.
5	Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggr. 40mm nominal size.
6	Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggr. 20mm nominal size).
7	Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggr. 20mm nominal size).
8	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
9	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
10	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
11	Steel Reinforcement for RCC work incl. straighening, cutting, bending, placing in position & binding all complete upto plinth level TMT bars.Fe 500.
12	Centring and shuttering including strutting, propping etc.and removal of form work for foundation, footings, bares of column etc. for mass concrete.
13	Extra for shuttering in circular work in walls (any thickness.) incl. attached pilasters, buttresses, plinth & string courses.
14	supply of cover L.D Rectangular 455 x 610 mm with frame including fixing etc.
15	Dry random rubble masonry with hard stone in foundation and plinth without bond stone.
16	Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand).
17	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge 15 mm to 40 mm nominal bore.
18	Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge above 40 mm nominal bore.
19	Filling available excavated earth ( excluding rock) in trenches, plinth side of foundationetc. In layer not excedding 20cm in depth , lead upto 50mtr and lift upto 1.5mtr
20	Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 200 mm dia Ductile Iron Class K-9 Pipes.
21	Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 150 mm dia Ductile Iron Class K-9 Pipes.
22	Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 20mm ϕ
23	Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 50mm ϕ
24	Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 65mm ϕ
25	Laying and fitting of HDPE pipes 40mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
26	Laying and fitting of HDPE pipes 50 mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
27	Laying and fitting of HDPE pipes 63mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
28	Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket100 mm dia pipes.
29	Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket150 mm dia pipes.
30	Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket200 mm dia pipes.
31	Provididng Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe).
32	Providing and laying D.I. Specials of Class K-12 suitable for mechanical jointing as per IS : 9523 upto 600 mm dia.
33	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm nominal bore.
34	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20 mm nominal bore.
35	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 25 mm nominal bore.
36	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 32 mm nominal bore.
37	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 40 mm nominal bore.
38	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 50 mm nominal bore.
39	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 65 mm nominal bore.
40	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 80 mm nominal bore.
41	Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 25 mm dia
42	Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm dia
43	Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm dia
44	Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 65 mm dia
45	Making connection of GI distribution branch with GI main of following sizes by providing and fixing Tee, union etc, including cutting and threading the pipe etc. complete 25 to 40 mm nominol bore
46	Fitter engage for retrieving of damages pipes, bending straightening, cutting of pipes, & locating, tracing, blockages of pipes including rethreading of pipes etc.
47	Labour engage for retrieving of damages pipes, bending straightening, cutting of pipes, & locating, tracing, blockages of pipes including rethreading of pipes etc.
48	Welding of joints by electric arc welding including, testing and commissioning of joints including carriage of set and all other accessories including making arrangement for electric supply/arrangement for Generator etc complete.
49	Carriage of D.I pipes by Mechanical Transport including loading unloading & stacking from Procurment Jammu to road side of work average distance 230 Km.
50	Carriage of D.I pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 05 Km.
51	Carriage of G.I pipes by Mechanical Transport including loading unloading & stacking from Procurment Jammu to road side of work average distance 230 Km.
52	Carriage of G.I pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 0.50 Km.
53	Carriage of HDPE pipes by Mechanical Transport including loading unloading & stacking from Procurment Jammu to road side of work average distance 200 Km.
54	Carriage of HDPE pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 03 Km.
55	Carriage of Cement & steel by Mechanical Transport including loading unoading & stacking from nearest market place (To be identified by engineer in charge) to road side of work at an A) average distance 25 km.
56	B) average distance 35 Km.
57	Carriage of cement by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work A) average distance 05 Km.
58	B) average distance 03 Km.
59	Carriage of steel by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 05 Km.
60	Carriage of Sand & stone aggrigate upto 40mm nominal size (crshed) by Mechanical Transport including loading unoading & stacking from source (To be identified by engineer in charge) to road side of work at an A) average distance of 35 km.
61	B) average distance 45 Km.
62	Carriage of Sand and stone aggrigate up;to 40mm by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work at anA) average distance 05 Km.
63	C) average distance 03 Km.
64	Carriage of stone aggrigate above 40mm nominal size (crshed) by Mechanical Transport including loading unoading & stacking from source (To be identified by engineer in charge) to road side of work at an average distance of 45 km.
65	Carriage of stone aggrigate above 40mm nominal size (crshed) by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work at an average distance 03 Km.
66	Carriage of stone by Manual means including loading unloading & stacking from source (to be identified by Engineer in charge) to site of work at an average distance 01 Km. Please Enable Macros to View BoQ information

Tender For Permanent Restoration/Construction Of Protection Work, Providing Laying Fitting Of Di/Gi/Hdpe Pipes In Gravity Main, Sub Main And Distribution Systems Of Various Water Supply Schemes Water Supply Scheme Puneja, Water Supply Scheme Bhaderwa, Doda-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us