Tender For Special Repair To Building No. T-28 At Si Lines Under Ge Bhopal
Tender Value
41.32 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
3 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No. T-28 At Si Lines Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M&L for providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) with 12mm semi perforated micro tegular edges GRG false ceiling tiles of Size 595 x 595 mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws including taking down old false ceiling any type and pattern complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed |
| 4 | All as ser Ityem No.2.00 here-in-before but 0.50 mm thick as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) including dismantling of old sheets fixed at any location complete all as specified and directed |
| 5 | M&L for light shade, vitrified ceramic tiles 9-10 mm thick, premium quality, coloured (of approved shade and design) area of each tiles exceeding 0.42sqm but not exceeding 1.00 sqm, joint free, as in floors etc. set and jointed in neat cement slurry and joints grouted with pigment to match with shade, laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 6 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm) in floors and skirting set and jointed in neat cement slurry over and including screed bed 15cm in CM (1:6) and pointed in white or coloured cement to match with shade of tiles including dismantling of old tiling fixed in any mortar and position complete all as specified and directed. |
| 7 | M&L glazed ceramic colour tiles with suitable matching highlighter in vertical surfaces of size not less than 450x 300x 7-8mm thick set and jointed in neat cement slurry fixed over and including 10mm thick rendering in CM (1:4) as in backing coat and pointed in white or colour cement to match the shade of tiles including dismantling of old tiling fixed in any mortar and position complete all as specified and directed. |
| 8 | M&L for 25mm thick in PCC 1:2:4 type B0 using (using 12.5mm graded stone aggregate) as in bedding layer for laying in floor as in levelling course including dismantling floor complete all as specified and directed |
| 9 | M&L green marble (approved pattern and texture) work 15 to 18mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in laid over and including 20mm cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble and rounding of edges all around from inside and outside complete all as specified and directed. |
| 10 | M&L granite 18-20 mm thick (of approved colour and texture) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite complete all as specified and directed. |
| 11 | M&L cement concrete (1:3:6) type C-1 using (using 20mm graded stone aggregate) 75mm thick as in plinth protection/Path etc finished fair and even laid in bays n.exc 2m in length and cutting of dummy joints 65mm deep x 10mm wide @ 3m intervals and at corners filled with bitumen mastic 1:3 complete all as specified and directed |
| 12 | M&L for 10 mm thick rendering in cement plaster 1:6 on other than fair face of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. |
| 13 | M&L for rendering 15 mm thick cement plaster in two layers (10mm in cement mortat 1:6 as backing coat+5mm in cement mortar 1:4 finish coat with WPC) on fair faces of bricks or concrete surface finished even and smooth without using extra cement including taking down old plaster and raking out joints all as specified and directed. Note:- WPC shall be measured and paid seperately. |
| 14 | Supply only Integral water proofing compound complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper including a coat of white cement based putty of 1-2 mm thick complete all as specified and directed. |
| 16 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty all as specified and directed. |
| 17 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed. |
| 18 | M&L for preparation of old plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion complete all as specified and directed. |
| 19 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed. |
| 20 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and as directed. |
| 21 | S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. |
| 22 | All as ser Ityem No.20.00 here-in-before but WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 75 mm all as specified and directed. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of ngineer-In-Charge. |
| 24 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain glazed shutter door of 30 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note : Wiremesh Shall be measured and paid separetely). |
| 25 | S&F 150 mm double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed. |
| 26 | S&F for 150 mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 27 | S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 28 | S&F 300mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 29 | S&F for 100mm stainless steel butt hinges (heavy) complete all as specified and directed. |
| 30 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 31 | S&F mild steel, 250 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete complete all as specified and directed. |
| 32 | M & L for preparation of newly wooden surfaces with two coats of synthetic enamel paint over coat of pink primer of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and directed. |
| 33 | M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. |
| 34 | M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 35 | S&F of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to openings complete all as specified and directed. |
| 36 | S&F in repair powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frame and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, suitable aluminum handle, handle lock/ mortice lock for door shutter etc all complete as per architectural drawings complete all as specified and directed. |
| 37 | S&F Sheet glass 4 mm thick n exc 0.5 sqm in each pane fixed in aluminium or wooden windows complete all as specified and directed by Engr in charge. |
| 38 | S&F 4.0 mm thick figured glass, pin headed type and glazed oil putty in square not 0.50 sqm in each pane complete all as specified and directed by Engr in charge. |
| 39 | S&F 25mm stainless steel curtain rod premium quality including taking down old rod with fittings complete all as specified and directed. |
| 40 | S&F decorative type SS curtain rod bracket with cap of suitable for 25mm dia rod complete all as specified and directed. |
| 41 | S&F rotational moulded polyethylene water storage tank 1000 ltrs cap cylindrical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I including dismantling of old water tank complete all as specified and directed |
| 42 | S&F 20mm Ball (float) valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed |
| 43 | Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 44 | S&F 20 mm CPVC pipes SDR 11 and plain CPVC SDR 11 with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 45 | Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 46 | S&F of GI tubing Dia 20 mm dia 'medium weight' and all fittings on walls / ceilings or Laying in floors incl taking down old water tubing fixed in any positions complete all as specified. |
| 47 | S&F 20mm bore, gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 48 | S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PVC SWR P or S trap complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified & as directed. |
| 50 | S&F in repairs urinal bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) but incl CP spreader and CP waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing. |
| 51 | S&F wash hand basin counter top having size 440 x 440 x 135 or 420 x 345 x 170 mm rectangular/ oval shape of approved make incl waste coupling and waste pipe complete all as specified and directed. |
| 52 | S&F in repair 5 mm thick, looking mirror approved quality with wooden back and edge, complete polishing , fixing in repairs complete all as specified and directed. |
| 53 | S&F in repair 15mm bore dia chromium plated stop valve/angle cock, but fancy type, chromium plated with long shank and cup (concealed type) and fixed complete all as specified and directed |
| 54 | S & F in repair 15mm bore, fancy type, long body bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 55 | S&F in repair CP long body two way, bib tap, 15mm dia complete all as specified and directed. |
| 56 | S&F 15 mm wash basin mixer, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by engr in charge. |
| 57 | S&F in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern, PVC flushing pipe of suitable length and PVC connection 450mm long. complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | S&F in repair CP Health faucet( ABS Body) suitable for 15mm dia pipe with 1.25m long flexible steel tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified. |
| 59 | S&F PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified & as directed. |
| 60 | S & F in repairs Brass chromium plated shower rose 150mm dia or width with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 61 | S & F for soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by the Engineer-in-Charge |
| 62 | S&F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms complete all as specified and directed. |
| 63 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge. |
| 64 | Taking down of PVC rainwater pipes and waste water pipe or gas pipe (any size or pattern) in any position , including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge. |
| 65 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with PVC clamps complete all as specified. |
| 66 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 67 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamps complete all as specified. |
| 68 | S & F 110mm bore PVC (SWR) bends of any radius with access door jointed with solvent cement, complete all as specified and directed. |
| 69 | S & F 75mm bore PVC (SWR) bends of any radius with access door, jointed with solvent cement, complete all as specified and directed. |
| 70 | S & F for 75 mm bore PVC (SWR) junction (single T) with access door equal or unequal, jointed with solvent cement, complete all as specified and directed. |
| 71 | S & F for 110mm bore PVC (SWR) junction( Single T) with access door equal or unequal, jointed with solvent cement, complete all as specified and directed. |
| 72 | S & F 110/75mm bore PVC (SWR) vent cowl, jointed with solvent cement, complete all as specified and directed. |
| 73 | M&L for 75mm bore PVC (SWR) floor trap/ multi trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge |
| 74 | M&L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of old brick work complete all as specified and as directed by the Engineer-in-Charge |
| 75 | S&F RCC Factory made manhole cover size 900x900 mm heavy duty, set in CM 1:6 complete all as specified and directed |
| 76 | S&F providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed |
| 77 | M&L for cement concrete type D2 (1:4:8) (40mm graded stone aggregate) in foundations and mass-concrete etc including dismantling of old PCC complete all as specified and directed. |
| 78 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 79 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 80 | Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed. |
| 81 | Dismantling/taking down of unserviceable distribution boards with MCBs all as specified and directed. |
| 82 | Taking down/dismantling of storage type hot water Geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections and deposited to E/M office store yard all as specified & directed. |
| 83 | Taking down carefully serviceable/unserviceable exhaust fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 84 | Taking down carefully ceiling fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 85 | S&F of LED tube light fitting bright 18/20 Watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector including taking down all as specified and directed. |
| 86 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS H cables 1.5 sqmm as per IS 694:2010 ISI marked, annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed Note:- cost of cutting chase and making good shall be included in the quated rates) |
| 87 | All as per Srl item No 85.00 here-in-before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed. |
| 88 | All as per Srl item No 85.00 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge. |
| 89 | All as per Srl item No 85.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge. |
| 90 | All as per Srl item No 85.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge. |
| 91 | S & F modular switch one way 6 Amp, one module, 240 volts complete all as specified and directed. |
| 92 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 93 | S & F modular switch one way 16 Amp, one module, 240 volts complete all as specified and directed. |
| 94 | Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed by Engineer - in - Charge |
| 95 | S&F modular ceiling rose 3 terminals 65x25 mm dia poly carbonate isolated all as specified & directed. |
| 96 | S&F modular lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed. |
| 97 | S & F in replacement stepped type modular electronic fan regulator as reqd. complete all as specified and directed by Engineer - in - Charge |
| 98 | Supply & fixing in replacement LED tube light complete fitting 40 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comlete all as specified and directed by Engineer in charge . |
| 99 | S & F in replacement LED lamp 10 Watt B22 CDL complete all as specified and directed. |
| 100 | S&F LED ultra slim decorative aluminium casted edge ceiling light, recess mounting LED 2 x 2, luminaire 36 watt, Warm white in colour with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core complete all as specified & directed. |
| 101 | Supply and fixing in replacement factory made epoxy powder coated Distribution Board TP & N 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid seperatly. |
| 102 | S&F in replacement MCCB 125 Amp, 3 Pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed. |
| 103 | S & F in replacement sheet metal enclosure double door type surface mounted concealed in wall 12 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. |
| 104 | S & F in replacement MCB SP suitable for 240 volts, AC supply 6 to 32 Amps , with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 105 | S & F in replacement MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge. |
| 106 | M&L in replacement for sub main wiring (Single phase) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:-(i) Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 107 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 108 | S&F in replacement building security light fitting complete with 36 watt, LED type pressure die cast aluminium housing and heat resistant polycarvonate cover with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed |
| 109 | M&L in replacement of earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 110 | Supply and fix in replacement sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed . |
| 111 | Supply and fix in replacement heavy duty exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, including cutting of hole in existing wall and resurfacing of disturbed area of wall with blades, and frame and louvers Complete |
| 112 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 113 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender