Tender For Special Repair To Building No T-9 At Sahapore Mil C Under Ge (C) Kolkata
Tender Value
46.32 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
7 days left
EMD
92642
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No T-9 At Sahapore Mil C Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work:SPL REPAIR TO BLDG NO T-9 AT SAHAPORE MIL CAMP UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 3 | Demolition of cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 4 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 5 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm each complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 7 | Dismantling of GI (corrugated, semi corrugated, Plain) sheet in roof covering incl ridges complete all as specified and directed. |
| 8 | Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed. |
| 9 | Taking down roof trusses, coupled rafters or trussed beams Clear span above 4 meters & upto 8 meters. complete all as specified and directed. |
| 10 | Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed. |
| 11 | Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 12 | Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 13 | Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, in Unframed Work, complete all as specified and as directed. |
| 14 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 15 | Taking down eaves gutters and and soil/ rainwater pipes (any size or pattern) including all fittings heads shoes bends swan necks etc. including cleaning and refixing or removal to store (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed. |
| 16 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. or for cable protection not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 17 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed. |
| 18 | Removing excavated material ( soils of any type) n exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 19 | Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed |
| 20 | M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 21 | M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 22 | Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of laddings, steps, cills, sushades, shelves, lintels etc and cutting chase for concealed water tubing or concealed coduit wiring etc and making good cutting grith n exc 10 cm girth on brick walls complete all as specified and directed. |
| 23 | M&L Brick work using Pulverizes fly ash bricks of class designation 75, straigth or curved on plan exc 6m mean radius built in CM (1:4) cmplete all as specified and directed. |
| 24 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 25 | S&F Powder coated Aluminium anodised doors, windows, partitions and ventilators using aluminium sections of size and type approved by Engineer-in-Charge including jointing cleats, snap beading etc, complete all as specified and as directed. |
| 26 | S&F Powder coated aluminium door shutter, aluminium section weighing 1.00 Kg/m (minimum) thickness not less that 2.00mm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door shutter, floor hinges, powder coated aluminium snap beading, screw etc complete all as specified and directed. |
| 27 | S&F anodised aluminum powder coating of any colour (Minimum thickness of powder coating 50 micron) for window and ventilator shutters side huge type without sash , aluminum sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing , anodised aluminum snap beading , screws, anodised aluminum fittings such as peg stay 150mm long (1 Nos) , hinges type B-21 100mm long 02 Nos, suitable handle (01 Nos) complete all as specified and directed (Fixing of wire mesh and glass shall be measure and paid separately under relevant items) . |
| 28 | S&F 75 mm long butt hinges heavy weight cold rolled mild steel and fixed or welding to steel chowkhats complete all as specified and directed. |
| 29 | S&F Aluminium anodised, barrel tower bolts of extruded section, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 30 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 31 | S&F 250mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed. |
| 32 | S&F Fancy type, Powder coated 20/25 mm dia of drapery rod fixed in position as in repair complete all as specified and as directed |
| 33 | S&F Bracket for fixing Fancy type,Chromium Plated 20mm dia curtain rod/ drapery rod etc as in repair complete all as specified and as directed. |
| 34 | S&F Roof trusses (framed) , trussed , purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or Flat section) including distance pieces , cleats etc Fe-410W (Gde E-250 Quality `A' complete all as specifed and directed. |
| 35 | M&L Mild steel Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed. |
| 36 | M&L Mild Steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and as directed. |
| 37 | S&F MS sheet 1.25 mm Drop ends (for spigot or socket ends) or nozzles for 150mm dia complete all as specified and directed. |
| 38 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed. |
| 39 | S&F Pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 40 | S&F 0.71mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)., as in repair complete all as specified and as directed. |
| 41 | M&L Veneered decorative plywood 4 Nos of ply , grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work, including takind down old unserviceable ceiling board including cover fillet complete all as specified and as directed.Note:- (1) Quoted rates are inclusive for all straight, ranking or circular cutting wastage on ceiling board.(2) Cover fillet shall be measured and paid separately. |
| 42 | M&L 3mm thick Cover fillets of standard hard board, 40mm wide, and fixing with screws, complete all as specified and as directed. |
| 43 | M&L 4mm thick suspended false ceiling HPSC (high pressure steam curved) pre-primered fibre cement non asbestous building board similar to E-Board Classic placed in a grid of size 605x605mm with aluminium powder coated angle/channel/tee section duly suspended with 4mm dia GI hanger fixed with GI hooks 4mm dia and fastner as required at the site including two coat of oil bound distemper complete all as specified and directed. Detail of section are as under:-(i) Aluminium Angle 25mm x 25mm x 1.5mmt thick.(ii) Aluminium Cross Tee 25mm x 25mm x 1.5mmt thick.(iii) Aluminium Main Tee 25mm x 38mm x 1.5mmt thick.Note:-The bidder quoted rate included for all straight, Raking or circular cutting, wastage on ceiling board |
| 44 | M&L for 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 45 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. |
| 46 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. |
| 47 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed. |
| 48 | M&L Glazed Ceramic Coloured Tile 450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed. |
| 49 | M&L 20 mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete external surfaces in two layers (each 10mm thick) finished even and smooth without using extra cement using water proofing compound on top layer @2% by weight of cement or as per manufactures instruction on external wall surface upto height of 4th storied bldg complete all as specified and directed.Note : WPC shall be measured and paid seperately |
| 50 | M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & fair without using extra cement complete all as specified and directed |
| 51 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smooth without using extra cement complete all as specified and directed. |
| 52 | \\"Supply only\\" liquid water proofing compound (ISI marked) complete all as specified and directed.Make:- STP NO 1/ PEDILITE(DR FIXIT)/ FOSROC/ CICO/ SIKA/Icannano |
| 53 | M&L Preparing new plastered surfaces of ceiling and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1.5mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 54 | M&L Preparing new Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1.5mm thick (appx) water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 55 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 1.5mm thick (appx) water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 56 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 57 | M&L complete removal of old decorated surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 58 | M&L preparation of old painted steel surface over 10cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed. |
| 59 | M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed. |
| 60 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to four stories height of bldgs. complete as all specified and as directed. |
| 61 | S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to four stories height of bldgs. complete as all specified and as directed. |
| 62 | S&F in repair single socketed UPVC (SWR) pipe Type \\"B\\" 75mm bore with rubber ring joint any radius complete all as specified and directed. |
| 63 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 64 | S&F in repair PVC (SWR) junction single (Double T) equal or unequal 110mm bore complete all as specified and directed. |
| 65 | S&F PVC (SWR) Bend 110mm bore (dia), any type etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 66 | S&F UPVC (SWR) Nahani/Floor Trap 75mm bore (dia) Outlet, Plain with Grating and Jointing with Solvent Cement complete all as specified and as directed. |
| 67 | S&F PVC (SWR) 75mm bore cowls and Jointing with Solvent Cement complete all as specified and directed. |
| 68 | S&F UPVC (SWR) 110mm bore Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches or fitted with oval access doors as in repair complete all as specified and directed. |
| 69 | S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed. |
| 70 | S&F Brass chromium plated fancy type pillar tap screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures complete all as specified & directed. |
| 71 | S & F in repair for chromium plated Bib taps fancy type for 15 mm bore pipe complete all as specified and directed. |
| 72 | S & F in repair 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. |
| 73 | S & F in repair for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. |
| 74 | S&F Stainless Steel Towel rail of size 15mm dia 600mm long decorative type fixed with walls including necessary fittings etc complete all as specified and as directed. |
| 75 | S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers , complete all as specified and as directed. |
| 76 | S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with \\"p\\" or \\"s\\" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 77 | Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. |
| 78 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. |
| 79 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe and including PTMT Ball Valve 25mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ballincluding Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 80 | Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, FTL fittings and making good to the disturbed surface complete all as directed by Eng-in-Charge. |
| 81 | M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including fabricated 1.6 mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps incl Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and as directed.Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. |
| 82 | All as per item No. 80.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge. |
| 83 | All as per item No. 80.00 here-in-before but one 3pin switch socket outlet 5A on independent board complete all as specified and directed by engineer incharge. |
| 84 | All as per item No. 80.00 mentioned here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly complete all as specified and directed by engineer incharge. |
| 85 | All as per item No. 80.00 mentioned here-in-before but using 4.0 sq mm size stranded copper conductor cable for one AC starter/Geyser point including 4.0 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewire complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F modular Switch socket combination 3 module multipurpose 2 in 1, 5 pin 15 Amps 230/240 volt flush type complete all as specified and as directed. |
| 88 | S&F Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. |
| 89 | S&F switch piano modular flush type 5/6 Amps 230V AC 1 module complete one way complete all as specified and directed by Engineer-in-charge. |
| 90 | S & F switch piano modular flush type 16 Amps 230V AC complete one way 1 module complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F modular socket out let 3 pin 5 Amps flush type 2 module complete all as specified and directed by Engineer-in-charge. |
| 92 | S& F modular electronic step type fan regulator 2 module by step type 230 volt complete all as specified and directed by Engineer-in-charge. |
| 93 | S&F modular bell push 1 module flush type 5 Amps complete all as specified and directed by Engineer-in-charge. |
| 94 | S&F modular cover plate with frame for fixing of modular switches/sockets complete for 1/2 modules complete all as specified and directed by Engineer-in-charge.Note:- Switch and sockets will be measured and paid separately. |
| 95 | All as per item No. 93.00 mentioned here-in-before but for 3 modules |
| 96 | All as per item No. 93.00 mentioned here-in-before but for 4 modules |
| 97 | All as per item No. 93.00 mentioned here-in-before but for 6 modules |
| 98 | All as per item No. 93.00 mentioned here-in-before but for 8 modules |
| 99 | S&F Blank Plate 1 modules of matching colour of coverplate complete all as specified and directed by Engineer-in-charge. |
| 100 | Supply & fix Switch piano, flush type, SP, one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed. |
| 101 | \\"Supply & fix Bell/buzzer push 5/6 amps, flush type, white/ivory finish complete all as specified and as directed. |
| 102 | Supply and fix Socket outlet 3/5 pin, 6 Amps, 240 volt flush type complete all as specified and as directed. |
| 103 | Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flush type complete all as specified and as directed. |
| 104 | Supply and fix Switch socket combination multipurpose 2 in 1, 3 pin 5 & 15 Amps 230/240 volt flush type complete all as specified and as directed. |
| 105 | Supply and fixing ceiling Fan regulator step type 240 Volt complete all as specified and directed by the Engr-in-Charge. |
| 106 | \\"Supply and fix Call bell ding dong AC 230 volts, single pole complete all as specified and as directed. |
| 107 | S&F Energy efficient LED fittings of capacity 1 x 10W suspended type / wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed. |
| 108 | S&F Energy efficient LED fittings of capacity 1 x 20W suspended type / wall mounted type complete with LED tube Lamp and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed. |
| 109 | S&F LED bulb 9 Watts 240Volts 50 hz with angular PVC/ Policarbonate bulb holder having luminous Efficacy of minimun 110 Lm/ Watts and life of atleast 15000 Hours ,opearting temperature of 0 C to 35 C , colour rendering index of 80 , colour temoerature of Min 6500K with start up time less than 2seconds, voltage withstand range of 140V- 270V complete all as specified and as directed. |
| 110 | Supply and fixing LED 2x2 ceiling light with superior efficacy of min 100lm/W, AC 120-300V, 50Hz CRI 80+ CCT 6500 35/36W to be fixed in ceiling and fitting with copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length with all the connection as directed by Engr in Charge. |
| 111 | S&F building security light pressure die cast housing with individual LEDs with modular secondary optics security light luminaires 35 watt LED with 50mm dia light grade GI pipe bent to shape of 45'' 1.5 mtr long and nuts bolts including fixing arrangement after taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 112 | Taking down unserviceable rusted / damaged MCB DBs of any type including MCBs and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed. |
| 113 | S&F Sheet metal enclosure for DB's when MCBs to be used 4 way single pole and neutral double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 114 | S&F Sheet metal enclosure for DB's when MCBs to be used 8 way SPN double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 115 | S&F Sheet metal enclosure for DB's when MCBs to be used 4 way TPN double door with 200 amps rated bus bar complete 240 volts complete all as specified and as directed. |
| 116 | S&F MCB 6 to 32 Amps, SP, 240 Volts , 'C' curve breaking capacity 10 kA complete all as specified and as directed. |
| 117 | S&F MCB 6 to 32 Amps, DP, 240 Volts , 'C' curve breaking capacity 10 kA complete all as specified and as directed. |
| 118 | S&F MCB 40 to 63 Amps, DP 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed. |
| 119 | S&F MCB 40 to 63 Amps, FP 240 Volts ,C- Curve breaking capacity 10 KA including necessary connection complete all as specified and as directed. |
| 120 | Taking down aluminimum sub mainwiring alongwith dameged casing capping /PVC conduit pipe from the wall roof or in floor and making good disturbuted surfaces complee all as directed |
| 121 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 25 mm dia including all fittings complete all as specified and as directed.Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. |
| 122 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 6.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 25 mm dia including all fittings complete all as specified and as directed.Note:- Two runs of 6 Sqmm conductor as main wire and one run of 6 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. |
| 123 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 10.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 10.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 25 mm dia including all fittings complete all as specified and as directed.Note:- Two runs of 10 Sqmm conductor as main wire and one run of 10 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. |
| 124 | Dis-assembling carefully ceiling fans/wall fan (any make) of 1200/1400mm sweep, cutting & removing old copper burnt winding wire and rewinding the same with new super enameled copper wire of suitable size / gauge including providing insulation by varnishing, oiling and greasing, replacing bearing and gun metal shaft required and reassembling back including testing complete.Note :- (i) Cost of bearings, rubber real, nut, bolt etc shall be measured in this item and nothing will be paid extra on this account.(ii) Working space if required, will be provided to the contractor for carrying out necessary rewinding/repair with in AGE E/M store yard premises(iii) If winded fan found unserviceable within six month of rewinding,contractor will repair the same without any extra cost.(iv)Cost of Machining work in body of ceiling fan by taking out worn out bearing, boring hole to accommodate ball bearings is included in this item and nothing shall be paid extra on this account.(v) Cost of carrying ceiling fan from site to the workshop and refixing of the same after repair is included in this item and all T&P and vehicle cost will be born by the contractor in this regard (vi) Spare parts except mentioned above shall be measured & paid separately. |
| 125 | Supply and fix in repair capacitor of 2.5 to 3.15 mfd for Ceiling fan as per existing one complete complete all as specified and directed by Engineer-in-charge. |
| 126 | Taking down and opening out the fan baled of exhaust/ceiling fan and keep it to safe custody for refixing after painting of ceiling fan/wall fan/exhaust fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc andf refing to original/ new position after rewiring complete all as specified and directed by Engineer-in-charge. |
| 127 | S&F Hylem sheet 3mm thick used for Housing switch, Socket, Regulator for required size as per requirementincluding screws complete all as specified and directed by engineer incharge. |
| 128 | Taking down unserviceable exhaust fans and supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete as directed.Note:- Unserviceable fan shall be deposited to MES yard. |
| 129 | Taking down carefully Window Type / Split Type / Tower Type Air Conditioner 1/1.50 / 2.00/3 Ton capacity, from its location and removing dirt and dust from interior and exterior of the Air Conditioner and washing the condensor and evaporator with varmi clean solution and other areas by soap solution, spraying pressurised water on condensor and evaportor with proper protection of electrical fixtures and connection, drying by blowing air, and placing in same position complete all as directed.Note:-Refrigerent and copper pipe shall be measured and paid seprately. |
| 130 | Supply only for filling refrigerant gas R-22 for AC complete including testing all as specified and directedby Engr-in-Charge. |
| 131 | Supply only Copper pipe with insulation 1/2\\" dia, superior quality suitable for refrigeration of split ACs, drawn through/fixed to walls or roof complete all as directed |
| 132 | Supply only Copper pipe with insulation 3/8\\"\\" dia, superior quality suitable for refrigeration of split ACs, drawn through/fixed to walls or roof complete all as directed |
| 133 | S&F capacitor of 25 to 60mfd capacity AC 240 volt and 50 Hz including taking down of old unserviceable capacitor complete all as specified and directed . |
| 134 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 15 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and directed. |
| 135 | Taking out unserviceable UG cables of any type and any sizes from trenches etc and removing from the site of work complete all as specified and directed.Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately under relevant item of these schedule. |
| 136 | Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 50 Sqmm 4 core in trench/duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as directed by the Engr-in-Charge. |
| 137 | Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge.Note:- Thickness after punning down shall be measured for payment. |
| 138 | Supply and laying in trenches, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge. |
| 139 | Laying only in trenches Except Bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.Note:- Serviceable bricks shall be obtained from taking down item. |
| 140 | Materials and Labour Cutting existing road / path etc for taking out cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 ( 1:3:6,) using 40mm graded crushed stone aggregates) of suitable depth complete all as directed by Engineer-in-Charge. |
| 141 | Supply and Laying Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed. |
| 142 | Supply and Laying in repair Steel Water Tubing 25mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed. |
| 143 | Supply and Laying in repair Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and as directed. |
| 144 | Supply and fix in repair Gun metal, globe or gate valves (ISI marked) ( Class-I) with iron wheel head, screwed both ends for 25 mm bore GI pipe complete as specified and as directed |
| 145 | M&L Cutting drilling and tapinge existing CI/DI water mains in position, for addn/altrn or for taking branch connection/insertion of pipe specials, valve upto 80 mm bore pipe complete all as directed by Engineer- in- charge. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender