|
| 1 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil. |
| 2 | M&L PCC 1:4:8 Type D-2 (using 40mm graded stone off) as in foundation, filling and mass concrete complete all as specified and directed. |
| 3 | M &L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed. |
| 4 | MS Flats for supports or stays for chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 5 | Supply only Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire. |
| 6 | Fixing of Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire. |
| 7 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, exc 5cm and n.exc 10cm complete. |
| 8 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed . |
| 9 | S&F Mild steel round bars 10mm dia and over as in strengthening bars for bending cranking spirallt for hooking for chain link, hooking end and welding with flats of chain link fencing Fe 410W (Gde E-250 ) quality -A or FE-290 (Gde E-165)complete all as specified . |
| 10 | M&L for PCC in embedding of chain link fencing, rounded or chamfered on edges type B1 (1:2:4) using 20 mm graded aggregate including necessary formwork. |
| 11 | M&L for preparation of new iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 12 | M&L for preparation of new steel surfaces of any desc n.exc 10cm in width or girth when when unconnected with other painting or when painting in diff tint and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 13 | Excavation in trenches n exc 1.5m wide and n.exc. 1.5 m in depth for foundation in soft/loose soil and getting out complete. |
| 14 | M&L for Brick work with old modular size Fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed. |
| 15 | M&L Rendering 10mm thick in cement mortar 1:4 cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed.complete all as specified and directed. |
| 16 | M&L preparation of new plasterd surface of wallsand applying two coats of cement base paint over and including a coat of alkali primer complete all as specified and directed. |
| 17 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exeeding 25cm thick layer as in soil complete all as specified and as directed. |
| 18 | Removing excavated material / soil to adistance exceeding 250m and not exceeding 500m depositing where directed at a level not exceeding 1.5m above the strting point complete all as specified and as directed. Please Enable Macros to View BoQ information |
