Tender For Special Repairs To Building No P-1/2 (Partly) Inside Fort Under Ge Chennai
Tender Value
30.71 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
6 days left
EMD
61500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building No P-1/2 (Partly) Inside Fort Under Ge Chennai
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jul-2026 | date_corrigendum | Date | 14-Jul-2026 |
| 2 | 03-Jul-2026 | BOQ_corrigendum | BOQ | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 2 | M&L for flyash brick work with straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed. |
| 3 | M & L for Brickwork with fly ash bricks ,straight or curved in any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed. |
| 4 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 5 | 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 6 | Preparation of new plasteres surfaces of wall and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) of any description n.exc 1.5 sqm each complete all as specified and directed. |
| 8 | Taking down chowkats or frames with shutters (with out taking off shutter from the frame) of any description exc 1.5 sqm and n.exc 4 sqm each complete all as specified and directed. |
| 9 | Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each |
| 10 | Taking down door shutters of any description exc 1 Sqm and n.exc 2 Sqm and refixing in the same opening after laying floor tiles and making necessary alterations to the size of shutters to suit with the door opening to the required height complete all as specified and directed. |
| 11 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage metred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the drilling 100mm long MS screws using PVC fastner all as specified amd shown on drg complete all as specified and directed. |
| 12 | S&F 2nd class hardwood glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered,or rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 13 | S & F Factory Made Solid PVC MouldedDoor Shutter with particle board core 28 to 30mm thick(stiles), with 2, 4, or 6 raised paneldesign with 2mm thick MouldedPVC Sheet on the front face &2mmplain colour PVC sheet onback face, supplying & fixing inframe at site as per specification& drawing ® complete all as specified and directed. |
| 14 | S&F 2nd class hard wood panelled shutters 35mm thick, plain framed (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS :1003(Part-I), kiln seasoned and chemically treatedand fitted to chowkats complete all as specified and directed. |
| 15 | S&F powder coated Anodised aluminium frame for doors, windows ventilators, partitions etc., with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Thickness of powder coating not less than 50 micron) |
| 16 | S&F aluminium powder coated sliding window using three track alumimium section weighing not less than 0.900Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws and fixed alongwith same section in three sliding shutters two for fully glazed with 4 mm thick tinted glass fixed with glazing clips, and one for wiremesh shutterswith stain less stell wire cloth etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh, hinges, handles, locking arrangements etc complete all as specified and directed. |
| 17 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the openingas per requirement and complete all as specified and directed. |
| 18 | S&F sheet glass 4mm thick figured pin head type and fixed to alumn window in squares n.exc 0.50 sqm in each pane complete all as specified and directed. |
| 19 | S&F in repairs aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aparture 1.40 mm and fixed with alumn wire staples fixed to wood/steel frames complete all as specified and directed. |
| 20 | M&L MS work in bands, straps, supports of stays, hook and pintle hinges, clamps, hold fasts, guardbars, grills bolts etc and similar conforming to Fe-290 Gde -E -165 complete all as specified and directed. |
| 21 | M&L for preparing surfaces of wood and wood based materials treating ends of posts, back of chawkats etc with tar or coat tarblack paint area tarred exc 0.1sqm but n.exc 0.5sqm each complete all as specified and directed. |
| 22 | M&L treating small aricles such as hold fast etc with tar or coat tarblack paint aera tarred n.exc 0.1sqm each complete all as specified and directed. |
| 23 | S&F Butt hinges, stainless steel medium weight 100 mm size ISI marked complete all as specified and directed. |
| 24 | S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 25 | S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed. |
| 26 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed. |
| 27 | S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 28 | S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 29 | M & L for non skid coloured ceramic tiles 7 to 8 mm thick (squre/rectagular) are of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 30 | -ditto- item No 29 above but on skirting/dado including backing coat of 10 mm thick in CM 1:4 complete all as specified and directed. |
| 31 | M & L for glazed ceramic coloured tiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed. |
| 32 | M&L for Virified Ceramic light coloured tiles of 10 mm thick in patches (square/ rectangular) polished, area of each tiles exc 0.36 sqm and not exceeding 1.28 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed. |
| 33 | M&L for Virified Ceramic Ceramic light coloured tiles of 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm and not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including backing coat in Cement Mortar 1:3, 10mm thick on fair faces of brick or concrete surfaces complete all as specified and as directed. |
| 34 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed. |
| 35 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed. |
| 36 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 25mm dia complete all as specified and as directed. |
| 37 | S/F Supplying and laying of CPVC pipes20mm outer dia SDR 11 & PlainCPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified and as directed. |
| 38 | S/F Supplying and laying of CPVC pipes25mm outer dia SDR 11 & PlainCPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified and as directed. |
| 39 | S/F Supplying and laying ofCPVC pipes32mm outer dia SDR 11 & PlainCPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified and as directed. |
| 40 | Dismantling water tanks and removing to store capacity exc 500ltr & n exc 1000 ltr complete all as specified and as directed. |
| 41 | M & L for rotational moulded polyethylene water storage tanks of three layers (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part I Capacity 1000 ltr complete all as specified and as directed. |
| 42 | S&F ball valve PTMT with epoxy coated aluminium rod for 25mm bore pipe high pressure with polyethylene high dinsity float and complete screwed for iron pipes complete all as specified and as directed. |
| 43 | M & L for 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with scruwes to aluminium frame work shutter.etc complete all as specified and as directed. |
| 44 | S&F for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and as directed |
| 45 | S & F in repairs Cast Aluminium (Die cast ) body door closer by Hydraulically regulated, designation No.2 univrsal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed. |
| 46 | M& L Brass mortice lock vertical type size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors complete all as specified and as directed. |
| 47 | S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 48 | M & L in repair Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 20 mm dia bore pipes complete all as specified and as directed. |
| 49 | M & L in repair Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 25 mm dia bore pipes complete all as specified and as directed. |
| 50 | S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (excluding fixing bolts flushing cistern and flush pipe ) incl plastic water closet seat cover complete all as specified and as directed. |
| 51 | S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed. |
| 52 | S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 53 | S&F in repairs for two way bib tap 15 mm bore chromium plate with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make shall match existing make- JAQUAR in quality and rate all as specified and directed. |
| 54 | S & F in repairs 15 mm dia bore pillar tap long neck with aerator fancy type cast copper alloy with crutch handle screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe or for brass ferrule etc complete of make shall match existing make- JAQUAR in quality and rate all as specified and directed. |
| 55 | S&F in repairs health faucet (hand shower with 1 M flexible tubbe with wall hook, chromium plated of make shall match existing make- JAQUAR in quality and rate all as specified and directed. |
| 56 | S&F in repairs soap dish, matt finished chromium plated (MCH/Colour CP) of make shall match existing make- JAQUAR in quality and rate all as specified and directed. |
| 57 | S&F in reapir PVC cabinet mirror PTMTof size 400 x 500mm with sided shelves fancy type of superior quality of make Prayag complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | M& L in repairs Brass mortice lock vertical type size 100 mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors complete all as specified and as directed |
| 59 | S&F in repairs for two way bib tap 15 mm bore chromium plate with crtuch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make shall match existing make- Prayag in quality and rate all as specified and directed. |
| 60 | S&F 15mm dia pillar taps cast fancy type copper alloy with capstan heads chromium plated scewed down high pressure with long screwed shanks and fly nuts screwed for iron pipes and fixed in repairs complete all as specified and as directed. |
| 61 | S&F in repairs 15mm dia Brass stop valves/angle cock chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for uniori and fixed in repairs complete all as specified and as directed. |
| 62 | Supply and fix PVC connections 15 mm size with two brass nuts of length 450 mm in repairs complete all as specified and as directed. |
| 63 | S&F Chromium plated brass shower rose125 mm including fixing to steel pipe or union fixed in repair complete all as specified and as directed. |
| 64 | S&F in repair 10 litres PVC valveless, syphonic action type, flushing cistern , low level , white with inlet, ball valve float and handle including brackets ( taking down existing cistern) make shall match existing make- Prayag in quality and rate all as specified and directed. |
| 65 | S&F in repairs vitrous chain wash basin of oval type including counter foul granite platform waste coupling, waste pipe and brackets etc complete all as specified and as directed. |
| 66 | S&F 600x450 bevelled edged looking mirror 6mm thick of selected quality glass, mounted on 6 mm thick commercial plywood and with aluminnium frame work fitted with chromium plated brass screws and cup washers including taking old one complete all as specified and as directed. |
| 67 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed. |
| 68 | S&F sink with draining board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe in repairs complete all as specified and as directed. |
| 69 | S&F in repair 20mm dia Tubular towel rail 600mm long between flanges 'D' type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 70 | S&F Shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (minimum weight 300gm) including taking down old one complete all as specified and as directed. |
| 71 | S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls including taking down old one complete all as specified and as directed. |
| 72 | S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors including taking down old one complete all as specified and as directed. |
| 73 | S&F (SWR) Bends of any radiusof 110 mm bore of pipe with oval access door complete all as specified and as directed. |
| 74 | S & F (SWR) branch Single (single Y) equal or unequal for 110 mm bore pipe with oval access door complete all as specified and as directed. |
| 75 | S & F (SWR) vent cowl suitable for 110 mm bore pipe complete all as specified and as directed. |
| 76 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet fixed in repair complete all as specified and as directed. |
| 77 | Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for including disposal outside MD Land complete all as specified and as directed. |
| 78 | M & L for precast cement concrete in man hole cover slab, chullah hoods, chajjas, platforms etc using type B1 concrete mix 1:2:4 with 20 mm graded aggregate and set in cement mortar 1:4 Note : RCC will be measured and paid seperately complete all as specified and as directed. |
| 79 | M/L 10mm dia and over TMT bars as in reinforecment cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips complete all as specified and as directed. |
| 80 | M&L for rendering 15mm thick on fair faces of brick work in two layers, first layer 10mm thick in CM 1:6 and second finishing coat 5mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instructions and finished even and fair on external surfaces complete all as specified and as directed. |
| 81 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 82 | Dubbing out average 15mm thick on irregular face of walls /ceiling in patches in CM (1:4) complete all as specified and directed. |
| 83 | Material and labour for 5mm thick rendering on concrete surface of ceiling in CM 1:3 in patches and rendering is to be finished even smooth without using extra cement complete all as specified and as directed. |
| 84 | Material and labour for applying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Chargeshall match existing make- Asian in quality and rate all as specified and directed.. |
| 85 | Complete removal of existing treatment & Material and labour for applying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of old plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge make- Asian in quality and rate all as specified and directed. |
| 86 | M & L for applying two coat of white wash as in ceiling incl preparation of old plastered surfaces complete all as specified and as directed. |
| 87 | M & L for applying three coat of white wash as in ceiling incl preparation of newly plastered ceiling surfaces complete all as specified and as directed. |
| 88 | M & L for complete removal of existing treatment on wall surfaces and washing, rubbing down and applying two coats of oilbound distemper over a coat of alkali resistant primer and 1 to 1.5 mm thick wall care putty on old surfaces of wall complete all as specified and as directed. |
| 89 | M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed. |
| 90 | M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed. |
| 91 | S&F 20mm dia mild steel CP curtain rod with brackets, stops rollers etc fixed in repairs complete all as specified and as directed. |
| 92 | M&L for Prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutter and shelves etc. In repairs including Ist class hard wood bedding all around the shutter and paints with synthetic enamel paint to beading complete all as specified and as directed. |
| 93 | M&L Granite (of any type) slab 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and moulding the edge ,hole for gas pipe and polishing complete as in cooking platform including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed. |
| 94 | S & F Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface all as specified and directed by GE .make shall match existing make- PRAYAG in quality and rate all as specified and directed. |
| 95 | PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls /floor complete as in spouts etc including dismantling existing pipes complete all as specified and as directed. |
| 96 | S&F PVC(SWR) Junction (single T) 75 mm bore of pipe with oval access door complete all as specified and as directed. |
| 97 | Cutting holes into or through brick walls but in brick walls superficial area n.exc 150sqcm built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete. and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 98 | S&F for Framed brackets of angles or tees with web and flanges cut toshape, drilled and countersunk for screw, including bending andwelding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 (Bracketsover 10 kg each to be measured under 'Structural Steel')complete all as specified and as directed. |
| 99 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, includingNainital or similar pattern roof coverings complete all as specified and as directed. |
| 100 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 101 | Dismantling of wall and ceiling boards ( fibre pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed. |
| 102 | M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with stapples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of amke. GYPTECH/ARMSTRONG or equivalent complete all as specified and as directed. |
| 103 | S&F (SWR) Bends of any radius of 75 mm bore of pipe with oval access door complete all as specified and as directed. |
| 104 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 105 | S&F for Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Fe-410- W(Gde- E-250) quality- B(cut to ordinary lengths i.e. Within 20mm of the length indicated) complete all as specified and as directed. |
| 106 | M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed. |
| 107 | Framed work such as grills, grating, etc with ends of bars shouldered and or riveted or forged into spikes, framed grating or similar work confirming toFe 290 Gde-E-165 complete all as specified and as directed. |
| 108 | M&L forPreparing the new surface thoroughly by cleaning,of roof slab till the mother slab is exposed and washing down with clean water to remove all dirt etc. The slab should be recoated with slurry of Dr. Fixit Pidicrete URP or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP and cement in 1:1 proportion. After drying, Dilute 2 parts of Dr. Fixit Primeseal or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP with 1 one part of water. This dilution shall cover 7 to 8 sq.mt. Allow it to dry for6 to 8 hrs.Apply the first coat of Dr. Fixit Newcoat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP without any dilution at the rate of 2 sq mt per litre and allow it to dry before taking up the second and third coats, the rate of application being the same. and open woven glass fibre mesh of 2.5 mm x 2.5 mm must be sandwiched between the first and second coat. While the 1st coat is still wet, place the fibre mesh on it. After the coat dries, start applying the 2nd coat of Dr. Fixit Newcoat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP complete all as specified and as directed. |
| 109 | Complete removal of existing roof treatment any type and demolition of cement concrete padding at roof slab n exc 15cm thickness complete all as specified and as directed. |
| 110 | M & L for plain cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as roof padding type B0, 1:2:4 (12.5mm graded aggregate) finished fair and even over concrete surface on roof top, and finished even and smooth complete all as specifie and directed. |
| 111 | M&L for 10mm thick cement plaster in CM 1:3 over roof padding mixed with WPC @ 200 ml per bag, when the concrete is green all as per manufacturer instructions ( Note: Water proofing compound will be paid under measured seperately) complete all as specified and as directed. |
| 112 | Cleaning and preparation of newly plasteres roof surfaces and applying the water proofing treatment as under.(a) Applying 1st course of bituminious (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed.(b) Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as permanufactures instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, (e) Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on roof surfaces complete all as specified and directed. |
| 113 | Taking down of existing cement or cement lime plaster alongwith the existing water proofing treatment on walls and applying 10 mm thick cement plaster 1:3 mixed with liquid Water Proofing Compound. ( Note: Water proofing compound will be paid under measured seperately) complete all as specified and as directed. |
| 114 | Cleaning and preparation of newly plastered wall surfaces and applying the water proofing treatment as under. (a) Applying 1st course of bituminious (oil based) primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed.(b) Applying 2nd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm.(c) Applying 3rd course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, (e) Applying 5th course of a one coat of solar reflective aluminium paint @ 0.10 Litre/Sqm on wall surfaces complete all as specified and directed. |
| 115 | Taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses,regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified |
| 116 | Taking down carefully by unservicable fittings of different size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified |
| 117 | M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cabel of 1100V grade drawn through new non metallic rigid surface PVC conduit , in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for :- one light point controlled by one switch |
| 118 | one fan point controlled by one switch |
| 119 | one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 120 | one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 121 | As per above items No 117.0 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complet all as specified and directed. |
| 122 | As per above items No 117.0 for one socket outlet three pin 15 amps independent board with cable 4 sqmm size complet all as specified ( for AC ) |
| 123 | S& F for modular cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge |
| 124 | S& F for modular cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge |
| 125 | S& F for modular cover plate with frame 6 module complete all as specified and directed by Engr-in-Charge |
| 126 | S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed by Engr-in-Charge |
| 127 | S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed by Engr-in-Charge |
| 128 | S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge |
| 129 | S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed by Engr-in-Charge |
| 130 | S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed by Engr-in-Charge |
| 131 | S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed by Engr-in Charge |
| 132 | Taking down the Ceiling fans, Exhaust fans with all connected accessories and deposit in the store complete all as specified and directed. |
| 133 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Five star rated with brushless direct current motor complete all as specified and directed. |
| 134 | S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or equivalent Philips/Bajaj. |
| 135 | S & F 36 Watts 2x2 ceiling COOL LIGHT a veratile 2X2 Recess mounted luminaires which provieds soft-light and glare freesymmetrical illumination, complete all as specified and as directed by the Engr-in-Charge Make Havells Cat No. VENUSNEO2X2PLR36WLED865G2 or equivalent to Philips/Bajaj. |
| 136 | Taking down sub main wiring any type and any size complete after taking proper disconneting of electric supply properly and making good surface complete all as specifided and directed |
| 137 | S&F sub main wiring complete with two runs of 6 sqmm PVC insulated sheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. (From TPN DB TO SPN DB'S ) |
| 138 | S&F sub main wiring complete with Four runs of 16 sqmm PVC insulated sheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 16 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Four runs of PVC insulated cable 16 sqmm + one run 16 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. Location : (From MCCB DB to TPN DB) |
| 139 | Taking down MCB DB any type and any size complete after taking proper disconneting of electric supply properly and making good surface complete all as specifided and directed |
| 140 | S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volts 6 way MCB DB, TPN with 200 Amp rated bus bar shall conform to IP 38 protection |
| 141 | S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240 volts 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection including taking down the old one. |
| 142 | Taking down MCCB/MCBs any type and any size complete after taking proper disconneting of electric supply properly and making good surface complete all as specifided and directed |
| 143 | S&F MCCB adjustable thermal & magnetic setting 415V, 4 pole, 50Hz of cap 160 Amps 36 KA including taking out old u/s one and MCCB should placed in the DB enclsoure complete all as specified and as directed. |
| 144 | S&F MCB TPN 100 Amps of rating 415 Volts, complete all as specified and directed by Engr-in Charge |
| 145 | S&F MCB SPN 40 Amps of rating 240 Volts, complete all as specified and directed by Engr-in Charge |
| 146 | S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts complete all as specified and directed by Engr-in Charge |
| 147 | Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4 mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Jul 14, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender