Tender For Special Repairs To 07 X Jcos Md Accommodation At Chillianwala (Cw) Lines Under Ge (South) Ambala Cantt
Tender Value
39.64 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
8 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To 07 X Jcos Md Accommodation At Chillianwala (Cw) Lines Under Ge (South) Ambala Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | Amendments to dates | Date | 18-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I (B/R WORKS): Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed. |
| 2 | Material and labour for rendering 15 mm thick in cement plaster 1:4 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement including necessary scaffolding etc, complete all as specified and as directed. |
| 3 | Material and labour for rendering 15 mm thick in cement plaster 1:6 on any faces of brick work or concrete wall surfaces and finished even and smooth without using extra cement including necessary scaffolding etc, complete all as specified and as directed. |
| 4 | Material and labour for rendering 5 mm thick on ceiling surfaces of brick work or concrete wall surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and as directed. |
| 5 | Material and labour for preparation of new plaster surface of ceilling and applying three coat of white wash complete all as specified and as directed. |
| 6 | Material and labour for preparation of new plaster surface on walls and applying two coats of oil bound distemper over and including a coat of 2 mm cement base putty and alkali resistant primer complete all as specified and as directed. |
| 7 | Preparation new plastered surface of walls incl Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including alkali resistant primer complete all as specified and as directed. |
| 8 | Material and labour for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including alkali resistant primer complete all as specified and as directed. |
| 9 | Material and labour for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of oil bound distemper with painting roller over and including a coat of alkali resistant primer and 2 mm thick wall care putty white cement based in two coats to achieve smooth surface complete all as specified and as directed. |
| 10 | Material and labour for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 11 | Material and labour for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete, all as specified and as directed. |
| 13 | Material and labour for non–skid ceramic colour tiles 7 to 8mm thick (square /rectangular) area of each tiles exc 0.11 sqm but n exe 0.18 sqm, in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6) , complete all as specified and directed. |
| 14 | Material and labour for glazed ceramic colour tiles in vertical surface 300X600X7mm thick in dado, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in cement mortar 1:4 , complete all as specified and directed. |
| 15 | Material and labour for 25mm thick cement concrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floors complete all as specified and as directed. |
| 16 | Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick screed bed in cement mortar (1:6) , complete all as specified and directed |
| 17 | Material and labour for non skid coloured ceramic tiles of 7 to 8 mm thick, (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar (1:4), complete all as specified and directed |
| 18 | Material and labour for Granite (of any type) slab 18-20 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement as in floors/ cooking plateform, with admixiture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20 mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 19 | Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed. |
| 20 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete, all as specified and as directed. |
| 21 | Material and labour for Providing and laying of 300x300 mm & 10mm thick Anti-Skid pavement tile Endura vetrified tile in approved color & Shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 15 mm thick screed bed in cement mortar 1:4 and including old desmantiling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 22 | Material and labour for providing 75 mm thick cement concrete 1:3:6, type C–1 (using 20mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight , complete all as specified. |
| 23 | Dismantiling of brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed. |
| 24 | Demolition of mud in roofs, any thickness, including old tar felt, plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed. |
| 25 | Material and labour for providing cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops,padding,rounded or chamfered on edges including form work where ever required, complete all as specified and as directed. |
| 26 | Material and labour for rendering 10 mm thick on existing concrete surface of roof in cement mortar 1:4 including mixing water proofing compound @ 3% by weight of cement or as per manufacturer's instruction and finished fair and even without using extra cement complete all as specified and as directed . (Note:- WPC shall be measured & paid separately) |
| 27 | Material and labour for providing and laying at any height 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg/Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminious primer @ 0.40 ltr / Sqm by the same membrane manufactures roof membrane over existing RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg/ ltr at 25 degree centigrade on prepared surface.(c) Apply on APP membrane a coat of hot blown bitumen grade 85/25 conforming to IS 702 @ 1.20 Kg per Sqm(d) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gms/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap.(e) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. |
| 28 | Material and labour for cement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints grouted flush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar (1:6) , complete, all as specified and as directed. |
| 29 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete, all as specified and as directed. |
| 30 | Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and as directed. |
| 31 | Supply and fixing for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and as directed. |
| 32 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast of required dia and length complete all as specified and directed.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.(ii) Material manufacture test certificate should be provided before execution of work |
| 33 | Material and labour for rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging, door fitting (inclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe-410-W (Grade E-250) quality 'A', complete, all as specified and as directed. |
| 34 | Supply and fixing for joint less made of single extruded WPC (Wood Polymer Composite) solid decorative type moulded flush door shutter of size 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 35 | Supply and fixing for joint less made of single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. |
| 36 | Supply and fixing for joint less made of single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed. Note: wire mesh ,stainless steel butt hinges shall be paid separately. |
| 37 | Supply and fixing for mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 38 | Cutting holes in brick walls in cement mortar upto depth n.exc half brick thick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed. |
| 39 | Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face for APP Membrance, galvalume etc of groove with cement mortar 1:3 complete all as specified and as directed. |
| 40 | Supply and fixing for double shutter steel window box type ERW hollow P section comprising of glazed and gauged skeleton shutters fabricated from following sections :–(a) ERW hollow P section of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces.(b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T–section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf. (c) Vertical mullion shall be ERW hollow T–section of size 60 x 25 mm made from 1.25 mm thick MS sheet(d) The above steel window shall be deemed to include the following accessories/ fittings :i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape–04 Nos per windowii) Handle of Z section 20mmx25mm, 100mm long–01 No per leaf.iii) MS tower bolt stove enamelled 150mm long– 2 Nos per leaf.iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leaf.vi) Pintal hinges 12 x 75 mm – 2 Nos each leaf.vii) 10mm square Guard bar @ 10 cm c/c welded to frame.(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws.(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B–1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. |
| 41 | Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 42 | Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed. |
| 43 | Supply and fixing for in repair 3mm thick frosted sheet glass ordinary type glazing with oil putty in square n.exc 0.50 sqm each pane complete all as specified and directed. |
| 44 | Supply and fixing for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 45 | Material and labour for providing, cement concrete Type B-0, 1:2:4 (using 12.50mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates water troughs and the like including weathering, slightly rounded or chamfered angles and throating rounded or chamfered on edges, all as specified and as directed. |
| 46 | Supply and fixing for for 100mm MS Butt hinge medium weight cold rolled complete all as specified and directed. |
| 47 | Supply and fixing for 200mm long aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 48 | Supply and fixing for for 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 49 | Supply and fixing for 300 mm long aluminium sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as specified and directed. |
| 50 | Supply and fixing for 100 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 51 | Supply and fixing for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floo 150mm long cover plate, complete all as specified and directed. |
| 52 | Supply and fixing for mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate including fixing to steel frame complete all as specified and directed. |
| 53 | Supply and fixing for in repair stainless steel tubing of 25 mm dia, min 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc complete fixed as in repair complete all as specified and as directed. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered. |
| 54 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 55 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 56 | Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills ,sunsheds, shelves, lintel etc and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth complete all as specified and as directed |
| 57 | Supply and fixing for GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 58 | Supply and fixing for for GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 59 | Supply and fixing for in repair for 500 litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, connecting up pipes, securing access covers etc., and including 20mm bore tank nipple & one 20mm GI union at outlet and including 20mm ball valve with float and flynut screwed to pipe including dismantling of water tanks and removing to store all as specified in SSR Part–I complete all as specified and as directed |
| 60 | Supply and fixing for in repair for 20mm bore gun–metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 61 | Supply and fixing for in repair for 15mm bore gun–metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 62 | Supply and fixing for in repair 15mm bore long body bib taps cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 63 | Supply and fixing for in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed shank and fly nuts complete all as specified and directed. |
| 64 | Supply and fixing for in repair stop valves /angle valve chromium plated fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 65 | Supply and fixing for in repair concealed stop cock chromium plated fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 66 | Supply & fixing for in repair pvc connection 15mm size PTMT nuts of length 600mm complete all as specified and directed. |
| 67 | Supply and fixing for sink with draining board, made out of Stainless steel 1 mm thick sheet for kitchen or laboratory with plug, waste pipe, brass chromium plated coupling and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm with bowl size 410mm x 330mm x 160mm as in repair, complete, all as specified and as directed. |
| 68 | Supply and fixing for in repair vitreous china wash basin white, flat back, size 550x400 mm including cutting for pinning in ends of brackets or erecting stand, including 32mm bore pvc corrugated waste pipe 900mm long, 32mm bore waste coupling chromium plated long screwed shank and fly nuts etc, complete all as specified and as directed. |
| 69 | Supply and fixing for in repair vitreous china squatting pan, \\"Orissa pattern\\" of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, flushing pipe, anti syphonage pipe incl P/S Trap etc complete all as specified and as directed. |
| 70 | Supply and fixing for 10 litre capacity virgin polypropylene cistern, ISI marked, coloured at low level complete with PVC bend/flush pipe and making all connection including taking down existing high or low level unserviceable flushing cistern and making good the disturbed surface to match with the existing surface, complete all as specified and directed. |
| 71 | Supply and fixing for in repair stainless steel grating 100mm dia with or without waste hole complete all as specified and directed. |
| 72 | Supply and fixing for in repair 15mm bore shower rose chromium plated 125mm dia alongwith 15mm bore shower arm 195 mm long with bend of 45 degree complete all as specified and directed. |
| 73 | Supply and fixing for in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as in repair complete all as specified and as directed. |
| 74 | Supply and fixing for in repair 160x160x90 mm size brass chromium plated soap dish holder and fixed with brass screws to wall complete all as specified and directed. |
| 75 | Supply and fixing for as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 76 | Supply and fixing for in repair 32 mm dia LDPE PVC waste pipe 0.80m long for wash hand basin /kitchen sink etc of standard length complete all as specified and as directed |
| 77 | Demolition of brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed. |
| 78 | Material and labour for for brickwork with sub–class 'B' bricks, straight or curved on plan to any radius brick thick walls /manhole or foul position built in CM 1:6 complete all as specified and as directed. |
| 79 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 80 | Material and labour for factory made precast RCC manhole covers with frame (type A–1, 1:2:4, using 20 mm graded stone aggregates), of different sizes with plain faces, including 3mm thick mild steel flat sheet all around , mild steel handle 02 nos and incl reinforcement, set in cement mortar 1:4 including demolition of existing manhole cover complete all as specified and as directed. |
| 81 | Material and labour for providing reinforced cement concrete type B–1, 1:2:4 (20mm graded crushed stone aggregate) in roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete with joints to match including demolition of RCC complete all as specified and directed |
| 82 | Supply and fixing for mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0,.9mm dia or screwing with clip etc complete all as specified and as directed. |
| 83 | Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 84 | Taking down of PVC /cast iron/RCC drain pipes /rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including cleaning or refixing or removal to store, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 85 | Supply and fixing for 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed in wall including all fittings (bend,branch piece,tee & coupler etc ) complete all as specified and directed. |
| 86 | Supply and fixing for 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid trenches, floor including all fittings (bend,branch piece,tee & coupler etc ) complete all as specified and directed. |
| 87 | Supply and fixing for in repair 110 mm bore PVC cowls 110mm bore complete all as specified and directed |
| 88 | Supply and fixing for 75mm bore PVC (SWR) pipes single socketed incl all necessary fitting bend, tee, single Y etc. in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 89 | Supply and fixing for 75mm bore PVC (SWR) pipes single socketed incl all necessary fitting bend, tee, single Y etc. in any length with rubber ring joints, laid in floor /trenches complete all as specified and as directed. |
| 90 | Supply and fix in rep 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 91 | Supply and fixing for in rep PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and as directed. |
| 92 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 93 | Returning, filling in, including spreading, levelling ,watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed. |
| 94 | Removing surplus excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 95 | Supply and fixing for PVC (SWR) pipes, 150 mm dia bore laid and jointed in trenches complete with collars including all fittings (bend,branch piece,tee & coupler etc ) complete all as specified and as directed . |
| 96 | Material and labour for PCC 1:3:6, type C–2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 97 | Material and labour for PCC 1:5:10 type E–2 using 40mm graded crushed stone aggrgate as in filling in sunken portion floor, rounded or chamfered on edges including demolition of old PCC and removing from site complete all as specified and directed. |
| 98 | Material and labour for sunken floor water proofing treatment complete all as under :–(A) Scrapping the surface with wire brush and cleaning with water and allow to dry.(B) Applying cement slurry @ 3 kg/sqm duly mixed with water proofing compound.(C) 15 mm thick cement plaster 1:3 mixed with water proofing compound as per manufacture instruction (the corner will made rounded in concave shape).(D) Apply one coat of hot bitumin grade 85/25 conforming to IS 702 @ 1.5 kg/sqm.(E) Supply and laying APP with non woven polyster reinforced sheet 3mm thick weight not less than 3.00 kg/sqm.(F) Applying one coat of hot blown bitumin grade 85/25 conforming to IS–702 @1.50 kg/sqm.(G) Curing the sunken portion with water min 48 hours by ponding. all as specified and as directed. |
| 99 | Supply and fixing for 40 mm bore GI pipe medium grade as in spout pipe complete all as specified. |
| 100 | Supply only water proofing compound,complete all as specified and as directed.. |
| 101 | Dismentling of mild steel work of any description, complete, all as specified and as directed. |
| 102 | Material and labour for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow tube or flat sections) including distance pieces, cleats etc. conforming to Fe–410–W (Gde–E–250) quality 'A' complete all as specified and as directed. |
| 103 | Dismantling of plain or corrugated asbestos cement sheet of any thickness incl Nainital or similar pattern coverings, complete all as specified and as directed . |
| 104 | Supply and fixing for Pre–painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having zinc coating 150 grams per Sqm (Az 150) of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 105 | Supply and fixing for for Pre–painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa having zinc coating 150grams/Sqm (Az–150) as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 106 | Material and labour for 16–18mm thick baroda green marble slab as in floor/treads with bull nosed edge over 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry mixed with pigment to match the shade including grinding and polishing complete all as specified and as directed. |
| 107 | Material and labour for 16–18mm thick baroda green marble slab as in skirting, riser of steps, dado & pillar over 10mm thick screed bed in CM 1:4 set and jointed in neat cement slurry mixed with pigment to match the shade including grinding and polishing, complete all as specified and as directed. |
| 108 | Supply and fixing for 0.80 mm thick mild steel plain black sheeting as in covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified. |
| 109 | Demolition of Concrete of any description and in any position not otherwise specifically provided fo etc complete all as specified and as directed. |
| 110 | Material and labour for RCC (Nom Mix) Type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) in chajjas etc,Tank Staging and like complete all as specified and directed. |
| 111 | Material and labour for Formwork to soffits of chajjas, finished rough surfaces of concrete flat complete all as specified and directed. |
| 112 | Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed. |
| 113 | Dismantling of boarding with grid of any type/ size as in CB / Wardrobes/ false ceiling or fixed in any position in hardware (if any) etc, complete all as specified and directed. |
| 114 | Supply and fixing for ball catches with 8mm dia steel ball, and brass body or magnetic catcher with striking plate including letting in and fixed, complete all as specified and directed . |
| 115 | Supply and fixing for WPC board 18mm thick (Minimum density 650 kg/Cum) of both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottam and shelves inside the cabinets complete as per manufacture's specifications complete all as specified and directed. |
| 116 | Supply and fixing for WPC board 18mm thick (Minimum density 650 kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacture's specifications complete all as specified and directed . |
| 117 | Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed |
| 118 | Supply and fixing for for stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of grade SS304 of size 24\\"x30\\"x10\\" including screws and fixing arrangments complete all as specified and directed. |
| 119 | SCHEDULE 'A' PART-II (E/M WORKS): Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc, complete all as specified and as directed. |
| 120 | Taking down and refixing of water heater any type and any size/capacity with all accessories such as nut bolt washers ,PVC pipe etc with making all connection using three core copper conductor flexible cable drawn through in PVC flexible conduite pipe complete all as specified and directed. |
| 121 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed. Note :- a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately . |
| 122 | Description all as per serial item No.121 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed. |
| 123 | Description all as per serial item No.121 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed. |
| 124 | Description all as per serial item 121 here-in-before but for One light point controlled by two, two way switches complete all as specified and as directed. |
| 125 | Description all as per serial item No.121 here-in-before but for one socket outlet 16 Amp with 2.50 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade, ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 126 | Description all as per srl item No 03 here-in-before but for one socket outlet 16 Amp with 4.00 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 127 | Supply and fixing for of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed. |
| 128 | Supply and fixing for of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed |
| 129 | Supply and fixing for of modular switch 1 module, single pole, two way 6 Amps flush type, 230 volts complete all as specified and as directed. |
| 130 | Supply and fixing of modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed . |
| 131 | Supply and fixing for of modular socket outlet 2/3 pin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed . |
| 132 | Supply and fixing for of modular socket outlet 3/3 pin combined, (6pin), 6/16 Amp, one way, two module, 230 volts complete all as specified and as directed. |
| 133 | Supply and fixing as in repair electronic Fan regulator modular 100 watt, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed. |
| 134 | Supply and fixing for ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed. |
| 135 | Supply and fixing for in repair calling bell ding dong 230 volt, complete all as specified and as directed. |
| 136 | Supply and fixing for in repair LED batten fitting 18-20 watt, 4 feet, aluminium housing with electronic driver cool/warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed. |
| 137 | Supply and fixing for lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed. |
| 138 | Supply and fixing for in repair, LED surface mounted bulk head luminaries 8-10 watt with min 800 lumen, industrial model, IP 65, aluminium housing, surge protection including driver and LED lamp, etc. complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed. |
| 139 | Supply and fixing for Surface mounted wall Mirror LED light Compact & sturdy 10 watt LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution& applications .all accessories & fixtures, internally prewired and connecting by provding copper flexible wire 23/.0076 mm twin core upto fitting, complete all as specified and directed. |
| 140 | Supply and fixing for in repair, 9/12 watt LED light fitting wall mounting fixture (sketch type) including B-22 LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cable from ceiling rose to connector of the light complete including removing unserviceable light fittings complete all as specified and as directed. |
| 141 | Supply and fixing for in repair, LED Bldg Security Light Fittings of capacity 20 -25 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver and making electrical connection, service bracket of mild steel pipe 25 mm bore medium grade of length 0.70 mtr fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts and washer and suitable reducer for connecting fitting to GI pipe as required at site including two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work complete complete all as specified and as directed. |
| 142 | Supply and fixing for single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA 'B' curve including removing old unserviceable enclosure complete all as specified and as directed. |
| 143 | Supply and fix for sheet metal enclosure Vertical triple pole & neutral(VTPN) IP-54 with MCCB 100 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed. |
| 144 | Supply and fix for sheet metal MCB DB SPN 8 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed. |
| 145 | Supply and fix for MCB SP, 6-32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed . |
| 146 | Supply and fix for MCB SPN 32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed. |
| 147 | Taking down and refixing only ceiling fan after cleaning in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed. |
| 148 | Taking down and refixing only exhaust fan after cleaning in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed. |
| 149 | Taking down and refixing of serviceable electronic energy meter 5 to 30 Amps capactiy obtained under above item complete all as directed. |
| 150 | Supply and laying as in repair sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires complete all as specified and as directed.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 151 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as directed by Engineer-in-Charge and earth testing on completion . |
| 152 | Note:- Amount of credit of Rs. 70,601.00 for retrieved materials is mentioned in Schedule of Credit Page No. 17 & 18 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender