Tender For Special Repair To Building No P-09 Under Ge (North) Akhnoor
Tender Value
30.52 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
4 days left
EMD
61000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-09 Under Ge (North) Akhnoor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Jul-2026 | BOQ Corrigendum | BOQ | 11-Jul-2026 |
| 2 | 01-Jul-2026 | Tender Corrigendum | Other | 11-Jul-2026 |
| 3 | 11-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of existing old tarfelt, water proofing membrane including roof tiles, cement mortar screed, concrete base of any thickness and roughing surfaces to receice roof treatement including removal of debris from MoD land, complete all as specified and as directed. |
| 2 | Rendering 15 mm thick in cement and sand mortar 1:3 on roof surfaces with mixing of water proofing admixture as per manufacturer's instruction including finishing the surface even and fair to receive roof treatment, complete all as specified and as directed.Note:- Supply of Water proofing compound shall not be measured & paid seperately. |
| 3 | Supply only liquid water proofing admixture conforming to IS 2645-1975 of approved make complete all as specified and directed.(Dosage- @ 200ml per 50Kgs of Bags of cement) |
| 4 | Roof treatment :- (a) Apply a coat of bituminous primer conforming to IS - 3384 @ 0.40 Kg/Sqm on prepared surfaces. (b) After drying of primer apply a coat of hot blown 85/25 penetration grade blown bitumen conforming to (IS-702 @ 1.20 Kg/Sqm of surfaces. (c) Provide APP modified polymeric five layered membrane with central core of 100 micron high molecular high density film. Minimum weight of APP modified water proofing membrane shall be 3 Kg per Sqm. Product Name Multi plus manufactured by M/S STP texa Ltd Gurgoan/Hyper Plus Standard Manufactured by IWL India ltd Chennai, Bengal Acquaflux manufactured by Bengal bitumen New Delhi/Superior plus 310 by STP Lfd and any other product as appproved by E-in-C Br will be used. APP membranne will be laid across the slop from lowest line of slopping roof toward ridge with minimum end lap of 150mm and side lap of 75mm bonded with hot blown. Note: Complete treatment shall be carried out by the applicator of manufacture or through their authorized personal only. |
| 5 | Cement concrete type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in roof kerbs or mud stops, in floors, plinth courses, rounded or chamfered on edges complete all as specified and as directed. |
| 6 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed. |
| 7 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed. |
| 8 | Demolition of brick work or stone masonary built in cement mortar including all quions, arches , pillars etc. complete all as specified and directed. |
| 9 | Brick work with sub class 'B' bricks (using old size burn bricks) , straight or curved on plan exc. 6 mtr mean radius built in CM 1:4 complete all as specified and directed. |
| 10 | Brick work with sub class ‘B’ bricks (using old size burn bricks) straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 in half brick thick, complete all as specified. |
| 11 | Taking down cement plaster on stone or brick walls/ceiling etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 13 | Rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished the surface even and smooth without using extra cement, complete all as specified. |
| 14 | 15mm thick cement plaster rendering in CM 1:4 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified. |
| 15 | 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified. |
| 16 | Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 17 | Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified. |
| 18 | Preparation on old plastered surfaces of walls and applying two coat of oil bound distemper complete all as specified and as directed. |
| 19 | Preparation on old plastered surfaces of ceiling and applying two coat of white wash complete all as concerned and directed. |
| 20 | Preparation of old painted surfaces with complete removal of existing treatment & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall complete all as specified and directed. |
| 21 | Preparation of new painted surfaces with complete removal of existing treatment & applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall complete all as specified and directed. |
| 22 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed. |
| 23 | Machine cut kota stone slab flooring of size not less than 53 x 53cm and 20-25mm thick laid and jointed with grey cement slurry and mixed with pigment to, match the shade of slab including rubbing and polished with minor cut polishing 100mm wide marble Patti/ border all around including 15 mm thick screed bed CM (1:4) complete all as specified and as directed. |
| 24 | Description all as per item No-23 above but in vertical surfaces such as in skirting, dado etc.fixed over and including 10mm thick plaster in CM (1:4), complete all as specified and directed. |
| 25 | Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement laid over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 26 | Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick back coat layer plaster in cement mortar 1:4, complete all as specified and directed. |
| 27 | 20mm thick granite work (table rubbed and polished) as in cooking platform etc, bedded and jointed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite complete all as specified and directed. |
| 28 | Providing cement concrete type B-1, 1:3:6 ( using 20mm graded crushed stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight), complete all as specified. |
| 29 | M & L Plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) 25mm thick as in sub base of floors. |
| 30 | Repair to balcony/Facia and soffit of chajjas etc by taking down old rendering 15 mm thick dubbing coat where required to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including formwork/scaffolding work upto height 6.5mtr above ground level of bldg complete all as specified. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and as directed. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4.00 sqm each, complete all as specified and directed. |
| 33 | Taking down shutters of any description exc 1.00 Sqm Each, complete all as specified and directed |
| 34 | Mild steel framed work as in door or gate of angle or other section with gusset plate, rail braces complete drilled for fixing of steel sheeting or other covering . door etc to be prepared for hanging of sliding with grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-W(Gde-E-250) quality-B, complete all as specified and directed . |
| 35 | Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick flat iron projecting 10 cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified & directed. |
| 36 | Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified & directed. |
| 37 | PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregate) as in filling of pressed steel frame as in 50 mm parapet coping or in lintels upto 1.5m clear span, cills, plinth courses, string courses, coping, kneelers etc all as specified and directed. |
| 38 | PCC 1:3:6 type C-1 (Using 20mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed. |
| 39 | Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 40 | Factory made solid panel PVC door shutter/ cupboard shutter/ kitchen cabinets 30mm thick style wooden texture consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed. |
| 41 | 35 mm thick Flush shutters, solid core with particle board exterior grade as per IS-2202 of 199 (Part-I). Flush door shutter shall be internally lipped as per clause 8.52.2 of SSR-2009 Part-I complete all as specified and directed. |
| 42 | 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 43 | Pre laminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame in repairs as cupboard shelve and shutter, 12 mm thick. (Kitchen cup board/covered bottom shelf of cooking platform) fixed in repairs complete all as specified and directed. |
| 44 | Pre laminated particle board, exterior grade, laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame and necessary item like hasp and staple , in repairs as cupboard/Alimirah shelve and shutter, 18/19 mm thick, complete all as specified. |
| 45 | M&L external teak wood lipping 6 mm thick fixed with nails for 18/19 mm thick board. |
| 46 | 03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified. |
| 47 | 4 mm thick tinted sheet glass, selected quality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane, complete all as specified and as directed. |
| 48 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 49 | S&F butt hinges of size 100mm medium weight, fold rolled |
| 50 | Butt hinges of size 75 mm medium weight for rolled fixed as in cupboard welded with angle iron frame complete all as specified and directed. |
| 51 | 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified. |
| 52 | Aluminium handles cast type anodised of size 100mm long ISI marked with screws complete all as specified and as directed. |
| 53 | 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed. |
| 54 | 300mm Mild steel ordinary rat tail helical door springs including roller and roller plate fixed, complete all as specified. |
| 55 | Floor door stopper 100mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 56 | Curtain rail ,20 mm dia Stainless steel ,chromium plated fixed with CP braket, incl taking down of old curtain rods, complete all as specified and directed. |
| 57 | Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & gauged shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 .Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item |
| 58 | Description all as per Item No 58 above, but only fixed glass pane shutter without glazing bars except grills.. |
| 59 | Preparation of new steel and iron surfaces of any description over 10cm in width or girth not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier, complete all as specified. |
| 60 | Preparation of new untreated wood and wood based surfaces of any description over 10cm in width or girth not otherwise described and painting with two coats of synthetic enamel paint over a coat of pink premier, complete all as specified. |
| 61 | Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 62 | Vitreous china squatting pan \\"Orissa Pattern\\" size 580 x 440 mm in white colour with integral foot rest incl lime mortor, 'S' trap fixed in repairs complete all as specified and directed. |
| 63 | PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets fixed in repairs, complete all as specified and directed. |
| 64 | Vitreous china WHB (White) of size 550X400mm including waste fittings chromium plated brass ,CP steel chain and rubber plug,procelain stopper ,and pair of CI brackets, waste pipe fixed as in repair complete all as specified and as directed. |
| 65 | CP Sink mixer central hole basin mixer with popup waste system with 450mm long braided hoses (15mm cartridge size) fixed in repairs all as specified. |
| 66 | PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repairs complete all as specified and as directed. |
| 67 | CP angle valve/concealed stop cock (weight not less than 0.40Kg as mentioned in SSR part- 1 clause no. 18.14.2)of cast copper alloy (ISI Marked) chromium plated fancy type screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore complete all as specified and directed. |
| 68 | Bib tap 15 mm bore with flange, Brass CP, fancy type. with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repairs, complete, all as specified & directed. |
| 69 | Corner Sheet glass shelf assembly consisting of 5.5mm thick glass shelf with chromium plated bracket guard and railing 60cm long fixed in repairs |
| 70 | Chromium plated brass towel rail 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed. |
| 71 | 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repairs, complete all as specified and as directed. |
| 72 | Taking up or down GI pipe incl fitting fixture of pipe size 15mm dia bore complete all as specified and directed. |
| 73 | Taking up or down GI pipe incl fitting fixture of pipe size 20mm dia bore complete all as specified and directed. |
| 74 | 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 75 | Brass elbow 3/4x12 for 20mm outer dia of CPVC pipes, complete all as specified and as directed. |
| 76 | CPVC Brass Elbow 20mm dia all as specified and directed. |
| 77 | GI tubing 15mm dia 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors for GI tubing with all necessary GI fittings like bends, elbow, unions, tees, sockets, short pieces, plugs, hooks/clamps etc all as specified and directed. |
| 78 | Dismantling water tanks and removing to store of cap exc 500 but n.exc 1000 ltr all as specified. |
| 79 | Rotational moulded polyethylene 03 layer water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed. |
| 80 | Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified. |
| 81 | 20 mm dia bore gun metal globe or gate valve with iron wheel head screwed both end for iron pipe fixed in repairs complete all as specified and directed. |
| 82 | Hardcore of broken stone or boulder of guage exc 63mm but n exc 100mm deposited, spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.. |
| 83 | Cement concrete type D2 1:4:8 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed. |
| 84 | 25mm thick sand cushion in flooring below interlocking tiles complete all as specified and directed. |
| 85 | Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade, laid jointed & pointed with grey cement and pigments, with & including 25mm thick sand filling under pavers and paking the joints of paver block with sand including watering and consolidation all as specified and directed. |
| 86 | PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerb, padding , edges of path, protecting tiles finished surface even and fair, complete all as specified and directed. |
| 87 | Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 88 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 150 mm diameter incl fittings, complete all as specified and directed. |
| 89 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified. |
| 90 | PCC 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles including necessary form work complete all as specified and directed. |
| 91 | Concrete bed to drain pipes 1:3:6 type C-2 (Using 40mm graded crushed stone aggregate) including packing under and haunching against the side of pipes after they are laid and tested for 150mm internal dia of pipe, complete all as specified and directed. |
| 92 | RCC class NP3 150mm dia drain pipes laid in trenches and jointed with & including coller complete all as specified and directed. |
| 93 | Reinforced cement concrete 1:2:4, B-1 (Using 20mm graded crushed stone aggregate) as in manhole covers slab/shelves etc including necessary form work for fair finished surfaces complete all as specified and directed. |
| 94 | S & F mild steel bars 8mm dia TMT Bars and over cut to length bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and includig mild steel wire not less than 0.9mm dia or securing with clips complete fixed in repairs all as specified and directed. |
| 95 | Returning filling in including spreading watering and well ramming in layers not exc 25 cm complete all as specifed . |
| 96 | Powder Coated Aluminium door shutter including frame of hollow section 101mm x 44.00mm xthickness not less than 1.53 mm including aluminium anodized powder coated of hollow section glazed shutter of stiles size 85mm x 44.45mm xthickness not less than 1.56mm having grooves for aluminium beading and top rail of hollow section 83.5mm x 44.45mm xthickness not less than 1.50mm, lock rail of hollow section 83.5mm x 44.45mm xthickness not less than 1.50mm and bottom rail of hollow section 114.3mm x 44.45mmx thickness not less than 1.50mm ,one derived handle 300mm long,100mm long butt hinges or aluminium floor type hydraullic door closer, aluminium mortice lock 65mm 4 levers and glazing with select quality tinted glass 5mm thick or panelling with ACP sheet and cleat rubber packing aluminium beading including aluminium hardware fitting fixed in repairs, complete all as specified and as directed. |
| 97 | Powder coated anodised aluminium window / ventilator( glazed / gauged skeleton shutter ), (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No. ) suitable handle (1 No.) complete all as specified and as directed. |
| 98 | Anodised aluminium grills, 6mm dia size 100x100mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified. |
| 99 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 100 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 18, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender