Tender For Special Repairs To 16 X Or Md Accommodation At Jadunath Singh Lines (Fafa) Under Ge (South) Ambala Cantt
Tender Value
94.12 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
10 days left
EMD
1.66 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To 16 X Or Md Accommodation At Jadunath Singh Lines (Fafa) Under Ge (South) Ambala Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2026 | Amendment to tender documents | Other | 18-Jul-2026 |
| 2 | 04-Jul-2026 | Amendment to BOQ | BOQ | 18-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I (B/R WORKS): Material and labour for cutting holes exc 400 Sq. cm but not exc 0.10 sqm into or through brick walls built in cement mortar and making good in cement concrete 1:2:4 type B-0 as required complete all as specified and as directed. |
| 2 | Demolition of brick work built in CM incl all quions arches, pillar etc complete all as specified and as directed. |
| 3 | Material and labour for brick work withold size sub class ‘B’ bricks,straight or curved on plan to any radiousl built in cement mortar (1:4) complete all as specified and as directed. |
| 4 | All as per Item No 3 above but except bricks. |
| 5 | Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and as directed. |
| 6 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and as directed. |
| 7 | Material and labour for 5 mm thick cement plaster in CM 1:3 as in soffits of slabs/Ceiling/Chajja/ Sunshade finishing the plastered surface even & smooth w/o using extra cement etc complete all as specified and as directed. |
| 8 | Material and labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6),complete all as specified and as directed. |
| 9 | Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified and as directed. NOTE:WPC will be measured and paid for separately. |
| 10 | Material and labour for rough cast plastering over and incl 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. complete all as specified and as directed. Rough cast plaster shall be applied as specified clause 14.22 of SSR Part-I . |
| 11 | Supply only integral water proofing comound ISI Marked complete all as specified and as directed. |
| 12 | Material and labour for preparation of exposed brick wall surface by cleaning the surface with wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day.Note : Further treatment over the surface so achieved will be carried out only after approval of the same by GE. Note:- This item shall be executed by authorised applicator only. for carrying out efflorescence treatment to exposed and prepared wall surface here–in–above in following sequence :–(a) Prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent :–(i) Pidicrete URP of M/S Pidilite(ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied \\"BY HAND\\" while the primer is tacky. PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer's instructions :–(i) Pidicrete URP of M/S Pidilite(ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(c) PMM surface should be allowed to dry one day. After that it shoud painted with two coats of one of the following compound mixed with cement only in ratio of one part of selected compound and one point fire part of cement :–(i) Pidicrete URP of M/S Pidilite(ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(d) Now apply two coats of one of the following compound over the surface. These compounds are to be used as per manufacturer instructions :–(i) Pidifin 2K of M/S Pidilite(ii) Brush Coat of M/s Sika(iii) Brush Bond of M/s FOSROCNote : Both coats should be perpendicular to each other and gap between two coats shall be minimum 6 hours.(e) Sprinkle loose coarse sand after second coat while surface is tacky.Note: (i) Item will be executed by authorised applicator of the selected /approved company only. (ii) Every stage of work will be approved by GE then only next layer will be executed by contractor. |
| 13 | Material and labour for applying Two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt restance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/Old surfaces complete all as specified and as directed. |
| 14 | Material and labour for providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 15 | Material and labour for three coats of white lime wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed. |
| 16 | Material and labour for two coats of cement base paint on newly plastered wall surfaces incl preparation of surfaces over a coat of primer with alkali- resistant priming paint complete all as specified and as directed.(Rough Cast) |
| 17 | Material and labour for complete removal of existing treatment and applying two coats of cement base paint incl preparation of surfaces and coat of primer with alkali- resistant priming paint complete all as specified and as directed. |
| 18 | Material and labour for Preparation of new plastered surface of Two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete , as per manufacturer's specification complete all as specified and as directed. |
| 19 | Material and labour for Complete removal of existing treatment of wall Old plastered surface of Two coats Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete , as per manufacturer's specification complete all as specified and as directed. |
| 20 | Preparation of old Plastered or un-plastered surfaces of walls cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on walls complete all as specified and as directed. |
| 21 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. |
| 22 | Form work to soffits of suspended slab such as roof slab, floor slab, landings and similar work not exceeding 20cm thick (horizontal or slopping) for fair finished surfaces complete all as specified and as directed. |
| 23 | Use and waste of form work to chajjas and similar work for fair finish surfaces complete all as specified and as directed. |
| 24 | Material and labour for Slabs supported Type B1 1:2:4 ( 20 mm graded aggregate) on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed. |
| 25 | Material and labour for Reinforced Cement concrete Type B0 1:2:4 ( 12.5 mm graded aggregate) mechanically crushed stone aggregate as in chajjas etc complete all as specified and as directed. |
| 26 | Material and labour for mild steel 10 mm dia and over TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 27 | Material and labour for mild steel 6-8 mm dia TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 28 | Material and labour for post anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. |
| 29 | Material and labour for post anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 30 | Material and labour for post anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 31 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 32 | Material and labour for 25mm thick cement concrete Type B1 1:2:4 (12.5mm graded aggregate) as in floor finished rough to recieve floor finishes etc complete all as specified and as directed. |
| 33 | Material and labour for First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) tiles of size 600 x 600mm each and of thickness not less than 7mm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match the shade selected quality laid over and including 15mm thick screed bedding layer in CM (1:4) complete all as specified. |
| 34 | Material and labour for First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) tiles of size 600 x 600mm each and of thickness not less than 7mm, in skirting etc. over & including 10 mm thick cement mortar (1:4) screed, set and jointed with tile adhesive with notched trowel and pointed in grout of matching shade of tiles, complete all as specified and as directed. |
| 35 | Material and labour for non skid coloured ceramic tiles 400 x 400 x 7 to 8 mm set & jointed with neat cement slurry & pointed in white/coloured cement to match the tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 36 | Material and labour for glazed ceramic coloured tiles 450x350x7 mm thick on vertical surface such as skirting , dado etc. over 10 mm thick backing coat plaster in CM 1:4 complete all as specified and directed. |
| 37 | Providing and laying of 300x300 mm & 10mm thick Vitrified Pavement tile in approved color & shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.(Note: Design/pattern shall be as approved by GE at the time of execution) |
| 38 | Material and labour for Granite jet black shade, 18-20 mm thick, machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick (average thickness) cement mortar (1:4) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified. |
| 39 | Material and labour for Baroda Green marble, 18-20 mm thick, machine cut, lapd over & including 15 mm bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick (average thickness) cement mortar (1:4) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete all as specified. |
| 40 | Rounding to edges of stone (of any description) slabs one edge, such as in steps, cooking platform, window cill ,jamb and other similar situations including rubbing and polishing (mirror finish), complete all as specified. |
| 41 | Taking down chowkaths or frames n.exc 1.5 sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and as directed. |
| 42 | Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and as directed. |
| 43 | Taking down shutters of any description n exc 1 Sqm each and removing from the site complete all as specified and directed. |
| 44 | Dismantling structural steel work including doors, gates but excluding framed truss etc.A16 complete all as specified and as directed. |
| 45 | Supply and fixed for Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and as directed. |
| 46 | Supply and fixing for Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and as directed. |
| 47 | Supply and fixing of factory made flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and as directed. |
| 48 | Material and labour for 2nd class hardwood factory made 30mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) supplt and fixed to choukats complete all as specified and directed. |
| 49 | Supply and fixing for factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed. |
| 50 | Supply and fixing for Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face including fixing in frame at site with 03 Nos SS hinges, 02 Nos aluminium tower bolt 200 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed. |
| 51 | Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skelton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs and painting etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable including PCC (C-O ,1:3:6 using 12.5 graded stone aggregate) bed blocks for hold fasts, complete all as specified and directed.Note: (i) For the purpose of measurement & payment double shutter both glazed and gauzed with frame shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings. The pattern of grill shall be all as shown on drawing.(iii) Glazing, wire mesh and painting shall be measured and paid for separately. |
| 52 | Supply and fixing of steel ventilator box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skelton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable including PCC (C-O ,1:3:6 using 12.5 graded stone aggregate) bed blocks for hold fasts, complete all as specified and directed.Note: (i) For the purpose of measurement & payment double shutter both glazed and gauzed with frame shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings. The pattern of grill shall be all as shown on drawing.(iii) Glazing, wire mesh and painting shall be measured and paid for separately. |
| 53 | Supply & fixing for stainless steel butt hinges 100 mm long medium weight complete all as specified and as directed. |
| 54 | Supply & fixing for stainless steel fabricated type handle 150 mm long complete all as specified & directed. |
| 55 | Supply & fixing for 150 mm long stainless steel barrel tower bolts of extruded section and fixed complete all as specified & directed. |
| 56 | Supply and fixing for 250 mm long stainless steel sliding door bolts ,plate type, stove enamelled black,with bright bolt not less than 12mm with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple plate complete all as specified and directed. |
| 57 | Material and labour for mild steel work as in hold fasts etc complete all as specified and directed. |
| 58 | Supply & fixing for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 310-0 complete all as specified and as directed. |
| 59 | Supply & fixing for 0.80 mm thick mild steel plain black sheeting as in covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified. |
| 60 | Supply & fixing for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 61 | Supply & fixing for 250 mm MS ordinary rat tail rod pattern springs incl roller and roller plate fixed to wooden chwkhats or welded to angle iron door frames complete all as specified and as directed. |
| 62 | Supply & fixing for stainless steel curtain rod 25mm dia having wall thickness 1.6mm fixed with and including stainless steel decorative brackets, two lotto for each road length at both end etc as in repair complete all as specified and as directed. |
| 63 | Supply & fixing for SS peg set of 5 size 300x20x2.5mm complete all as specified and as directed. |
| 64 | Material and labour for Factory made mild steel door shutter with frame, fabricated from of 1 mm thick MS sheet including provision of steel handle & locking arrangement by providing 04 leaver lock with duplicate keys (of make Godrej, Link or Harrison) & handle etc, (all as per Godrej pattern & detail shown on Drawing No. FD-1032 sheet 1/1 dtd 25.9.93) including spray painting over a coat of red oxide primer and fixed the same on existing cupboard nitch with cement & sand mortar, complete all as specified and as directed. |
| 65 | Supply & fixing for stainless steel plate rack of standard size 750mmx600mm x250 mm complete and fixing with rawl plug and steel screws of wt not less than 8kg each, complete all as specified and as directed. |
| 66 | Supply & fixing for rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to aviod entry of insects,dust etc complete all as specified and as directed. |
| 67 | Supply & fixing for 150 mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed. |
| 68 | Dismantling wooden boarding any description, fixed in any position with nails as in shelves of cup board and pelmets of any description complete all as specified and as directed. |
| 69 | Supply & fixing for LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed by Engr–in–Charge. |
| 70 | Supply & fixing for 12mm thick LEAD FREE PVC Celuka ply (Minimum density 600kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. |
| 71 | Supply and fixing for magnet catcher of 25mm length, at in cabinet shelves all as specified and directed, complete all as specified and as directed. |
| 72 | Supply & fixing for continuous (Piano) hinges mild steel, bright finish or electro galvanised, width of flap 40mm completed as specified and directed. |
| 73 | Supply & fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and as directed. Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 74 | Supply & fixing for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and as directed . Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 75 | Taking up or down steel tubing and connections of 15/ 20/ 40mm bore in pipe, including cleaning for re-fixing or removal from site, complete all as specified and as directed. |
| 76 | Supply & fixing for Chlorinated PVC (CPVC) SDR-11pipes 16 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,i.e fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipe Supply & fixings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete, all as specified and as directed. |
| 77 | Supply & fixing for Chlorinated PVC (CPVC) SDR-11pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,i.e fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipe Supply & fixings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete, all as specified and as directed. |
| 78 | Supply & fixing for Chlorinated PVC (CPVC) SDR-11pipes 40 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,i.e fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipe Supply & fixings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete, all as specified and directed. |
| 79 | Supply & fixed for in repairs vitreous China squatting pan of “Orissa Pattern” of size 580x440mm coloured with integral footrest complete including making good floors complete all as specified and as directed. |
| 80 | Supply & fixing in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and as directed. |
| 81 | Supply and fixed in repair vitreous china wash hand basin white flat back of size 550x440mm including CI brackets , chromium plated waste coupling, waste pipe etc.,complete all as specified and as directed. (incl all waste fittings) |
| 82 | Supply & fixing in repair Brass CP WHB Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe complete all as specified and as directed. |
| 83 | Supply & fixing for CP Water purifier RO Connecting piece for Water Bib Tap for inlet of RO etc complete all as specified and as directed. |
| 84 | Supply & fixing for Two way angle valve cock chromium plated brass fancy type bore 15 mm complete all as specified and directed. Make:- L&K Cat pat NO:- 0327 or equivalent. |
| 85 | Supply & fixing for two way bib Tap chromium plated brass fancy type of 15 mm bore complete as all specified and directed. make JAQUAR continental series Cat no:-CQT23041. |
| 86 | Supply & fixing for chromium plated hand shower with 1.5 mtr long flexible tube complete all as specified and as directed . |
| 87 | Supply & fixing for corner glass shelf with CP stand complete all as specified as directed. |
| 88 | Supply & fixing in repair Towel ring square with round flange of make JAQUAR or Equivalent. complete all as specified and as directed. |
| 89 | Supply & fixing in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union in repair complete all as specified and as directed. |
| 90 | Supply & fixed in repairs stainless steel grating openable 100mm sqmm size with/without hole including fixing with white cement complete all as specified and as directed. |
| 91 | Supply & fixing in repair angle valve cock chromium plated fancy type 15 mm bore with flange make L & K code No 077A or equivalent complete all as specified and as directed. |
| 92 | Supply and fixing in repair 15mm bore Gun-Metal, globe or gate valves , with iron wheel head,screwed down both end for iron pipe and fixed all as specified and as directed. |
| 93 | Supply & fixing in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed., of 15mm bore, fancy type, chromium plated with long shank and cup (Concealed type). |
| 94 | Supply & fixing for sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and as directed. |
| 95 | Supply & fixing in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 96 | Supply & fixing in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, waste pipe complete all as specified. |
| 97 | Supply & fixing in repairs 600x450 mm size bevelled edge looking mirror of selected quality glass mounted on 12mm thick marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, CP screws, cup and washers complete all as specified and as directed. |
| 98 | Demolition and breaking up drain pipes 75/100 mm dia, SGSW, AC, PVC, concrete pipe including fittings, complete all as specified and as directed. |
| 99 | Supply & fixing for PVC Nahani traps complete 75 mm bore outlet including jointing to waste pipe fixed in cement concrete type B1 1:2:4. complete all as specified and as directed. |
| 100 | Supply & fixing for 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including dismantling of existing pipes of any description any length complete all as specified and as directed.. |
| 101 | Supply and fixing for PVC (SWR) 75 mm pipe type A single socket in any length with rubber ring joints laid in floors or trenches including dismantling of existing pipes of any description any length complete all as specified and as directed. |
| 102 | Supply and fixing of PVC (SWR) bends 110 mm bore complete all as specified and as directed. |
| 103 | Supply and fixing of PVC (SWR) bends 75 mm bore complete all as specified and as directed. |
| 104 | Supply and fixing of 110 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed. |
| 105 | Supply and fixing of 75 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed. |
| 106 | Supply and fixing in repairs of 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 107 | Dismantling old unserviceable cement concrete/PVC water tanks of capacity exc 250 ltrs & n.exc 500 Ltrs including supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colour cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 20 mm - 210 gms ) fixed as in repairs. complete all as specified and as directed.N ote : (i) Inlet, outlet & wash out pipe will be measured paid for separately. |
| 108 | Demolition and breaking up 150 mm bore drain pipes (salt glazed stone ware pipes) set in cement mortar complete all as specified and as directed. |
| 109 | Material & labour for Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2complete all as specified and as directed. |
| 110 | Supply & fixing for 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and as directed. |
| 111 | Material & labour for salt-glazed stoneware gully traps,150x150 square or round mouthed, type \\"P\\" setting and jointing to drains with cm 1:1. complete all as specified and as directed. |
| 112 | Material & labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth with neeru finish to plastering as all specified complete all as specified and as directed. |
| 113 | Material & labour for providing PCC 1:2:4 type B-1 (20mm graded stone aggregate )as in coping/ benching etc including necessary form work complete all as specified and directed. |
| 114 | Material & labour for plain cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregate) as in fdn , filling and mass concrete complete all as specified and directed . |
| 115 | Cleaning of sludge from the manholes by taking out loose sediment sand, girt, ash, sludge water, rags, fibres or vegetation from manholes including removal of sludge/debris to a distance exceeding 250m but not exceeding 500m and buried under ground complete all as specified and as directed. |
| 116 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe, complete all as specified and as directed. |
| 117 | Demolition of of reinforced Cement Conc of any description & in any position comp incl cutting of reinforcement complete all as specified and directed. |
| 118 | Material & labour for precast concrete cover slabs for drain man hole/drain etc. in (1:2:4) type B-1 using 20 mm mechanically crushed graded stone agg. set in CM (1:6) complete all as specified and as directed. |
| 119 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 120 | Material & labour for 75 mm thick PCC (1:3:6) C-2 using 40mm graded stone agg in path/plinth protection finished even & smooth completed W/O using extra cement complete all as specified and as directed. |
| 121 | Material & labour for PCC (1:3:6) C-1 using 20 mm graded stone agg as in surface channel or drain incl use of necessary from work for fair finished surface complete all as specified and as directed. |
| 122 | Extra for forming fair finishing of drain or channel 30 cm inner girth in cement concret using extra cement including forms, moulds mitrel gloppid ends etc, complete all as specified and as directed. |
| 123 | Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and as directed. |
| 124 | Material & labour for Wire brushing and cleaning the roof surfaces with water including flashings and junction of parapets complete all as specified and as directed. |
| 125 | Material & labour for APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.0 Kg/Sqm black finish reinforced with non-woven polyster matt wt not less than 150 gms/Sqm with thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching over laps with a propane or abutan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl preparation of surface complete all as specified and directed. Note :- The water proofing treatment shall be got carried out by the manufactarer or their authorised applictor's duly approved by GE in writing. |
| 126 | Material & labour for a coat of Heat resisting painting to Surfaces of any description wood, steel, iron, concrete, brick, stone, APP surface, etc., exceeding 10cm in width or girth incl preparation of APP surfaces complete all as specified and as directed. |
| 127 | Material & Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded mechanical crushed aggregate) for benching, coving shall be 150 mm in radius mixed with acrylic based polymer water proofing compound, complete all as specified & directed.(WPC shall be paid separately) |
| 128 | Material & labour for Roof Trusses (framed) , trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete as all spfd and directed. |
| 129 | Material & labour for rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes incl. rivetting, welding etc complete all as specified and as directed. |
| 130 | Dismantelling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in any position complete complete all as specified and as directed. |
| 131 | Supply and fixing in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 132 | Supply and fixing in repair Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 133 | Supply and fixing in repair semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 476 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm including both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. hangers (GI wire of 4 mm dia) to be fixed by hiliti consisting of HLS sleeve anchor fastencer length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos/PVC/ metal / Gysum sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed.NOTE : - Unit rate quoted against this item shall also includes taking down and refixing the same of any electrical board, switch, sockets, light and fittings, fans etc after carrying out necessary relevant work and making good to match with existing surface effected for this area etc complete all as specified and directed. |
| 134 | Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed. |
| 135 | Demolition of lime concrete or cement conrete of any description in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) complete including disposal of unserviceable rubbish outside Cantt area complete all as specified and directed. |
| 136 | Material & labour for Hard core of broken stone or boulders gauge n exc 63mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete, all as specified and directed. |
| 137 | Material & labour for 100mm thick cement concrete type D-2, 1:4:8 using 40 mm graded crushed stone aggregate) as in sub base complete and all as specified. |
| 138 | Providing and laying for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method usingPU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks incl dismantling of old tiles as per required size and pattern, finishing and sweeping extra sand; |
| 139 | Material & labour for providing cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in copings, slightly, rounded or chamfered angles including necessary form work etc complete all as specified and as directed. |
| 140 | SCHEDULE 'A' PART-II (E/M WORKS): Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc, complete all as specified and as directed. |
| 141 | Taking down Ceiling fan any size or any type and deposited to MES store yard complete all as specified and directed. |
| 142 | Taking down Exhaust fan any size or any type and deposited to MES store yard complete all as specified and directed. |
| 143 | Taking down old unserviceable single phase Electric Meter and deposited to MES Store Yard complete all as specified and directed. |
| 144 | Taking down old and unserviceable submain wiring any size /type including earth wire complete with batten/conduit etc complete all as specified and directed |
| 145 | Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan , complete all as specified and as directed. |
| 146 | Taking down old unserviceable TPN/SPN DB any of size/capacity complete all as specified and directed. |
| 147 | Taking down old unserviceable MCB SPN/MCB SP of any size/capacity complete all as specified and directed. |
| 148 | Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (Flame Retardant Low Smoke low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 25mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flush boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with SS screws and SS washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (Flame Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed.NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately.2. All chases will be cut by chase cutter only. |
| 149 | Description all as per item No 2 here in before but for socket out let point 5 Amps on same board complete all as specified and as directed. |
| 150 | Description all as per item No 2 here in before but for socket out let point 5 Amps on independent board complete all as specified and as directed. |
| 151 | Description all as per item No 2 here in before but for one bell point controlled by one bell push. |
| 152 | All as per srl item No 2 above but point wiring for one socket out let 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor |
| 153 | Supply and fix for modular switch piano 6 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. |
| 154 | Supply and repair for modular switch piano 16 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed. |
| 155 | Supply and fix for modular socket outlet 3 pin 6 amps, 230 volts flush type ,ISI Marked, complete all as specified and directed. |
| 156 | Supply and fix for modular socket outlet 6/16 amps, 3 pin combined 230 volts flush type ,ISI Marked, complete all as specified and directed. |
| 157 | Supply and fix for modular fan regulator/ step type one module/2 modules, 120W, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified. |
| 158 | Supply and fix for modular switches , bell push, 6 Amps one module , 230V,50Hzs, supply complete all as specified and directed |
| 159 | Supply and fix for call bell ding dang /musical type single phase complete all as directed |
| 160 | Supply and fixing for ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed. |
| 161 | Supply & fixing for Decorative ultra slim linear surface mounted Aluminium Extruded LED lighting fixture (4 feet length), 20Watt LED with input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K and system Lumens not less than 2000 lumens with High efficiency long life LED with lumen efficacy not less than 120 lm/W, Degree of protection should be IP 40 complete with Integral electronic driver (SMPS Based constant current out put) with lower THD, Output short cicuit protection/Open circuit protection, surge voltage protection up to 4KV and PF should be not less than 0.95, and working voltage should be 140V to 240 V AC conforming to the IS- complete all as specified and as directed Note: (02 Year warrenty certificate may please be submitted to Engineer in Charge) |
| 162 | Supply & fixing for Decorative ultra slim linear surface mounted Aluminium Extruded LED lighting fixture (2 feet length), 10Watt LED with input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K and system Lumens not less than 1000 lumens with High efficiency long life LED with lumen efficacy not less than 120 lm/W, Degree of protection should be IP 40 complete with Integral electronic driver (SMPS Based constant current out put) with lower THD, Output short cicuit protection/Open circuit protection, surge voltage protection up to 4KV and PF should be not less than 0.95 complete all as specified and as directed .(02 Year warrenty certificate may please be submitted to Engineer in Charge) |
| 163 | Supply & fixing for Environmental friendly, energy saving, surface mounted, decorative LED 10 Watt Bulk head luminire, pessure Die cast aluminium housing and high quality polycarbonate UV protected diffuser with input voltage AC 220V-240V, 50 Hz, with colour temperature 6500K and system Lumens not less than 1000 lumens with High efficiency long life LED with lumen efficacy not less than 100 lm/W, Degree of protection should be IP 65 complete with Integral electronic LED driver with APFC and lower THD, Output short cicuit protection/Open circuit protection and surge voltage protection up to 4KV (Inbuilt) and PF should be not less than 0.95 complete all as specified and as directed. (02 Year warrenty certificate may please be submitted to Engineer in Charge) |
| 164 | Supply & fixing for New generation energy saving and environmental friendly long life LED street light of 35 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with input voltage AC 220V-240V, 50 Hz, with colour tempetrature 6500K and system Lumens not less than 2500 lumens with High efficiency long life LED withSMD LED on MCPCB lumen efficacy not less than 100 lm/W, Powered by Built-in, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open /Short Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection up to 4KV (Inbuilt) and PF should be not less than 0.95 including making good disturbed surface complete all as specified and as directed. |
| 165 | Supply and fixing for Single Pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as specified and as directed. |
| 166 | Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4.0 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4.0 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed. |
| 167 | Supply , insatallation, testing of SPN distibution board 8way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles. Make:- Hager /Asian Optipro/HPL complete all as specified and as directed. |
| 168 | Supply and fixing for MCB SP single pole, 240 volts, 50 Hz, breaking capacity , 6 to 32 Amps, ISI marked, complete all as specified and as directed. |
| 169 | Supply and fixing for SPN 40 -63 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA complete all as specified and directed. Please Enable Macros to View BoQ information |
| 170 | Supply and fixing for SPN 40 -63 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 days
Jul 18, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender