|
| 1 | Item Code [12.7 (2022) punning]:Item Type [building] :: Finishing with neat cement (punning) |
| 2 | Item Code [2022 1.7]:Item Type [building] :: Sub Item Code [2022 1.7 + 1.7.1]: Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed: Ordinary rock |
| 3 | Item Code [2022 1.9.1]:Item Type [building] :: Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available :Ordinary rock |
| 4 | Item Code [2022 1.9.3]:Item Type [building] :: Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Hard rock(blasting prohibited) useful material 30% |
| 5 | Item Code [2022 10.1.1]:Item Type [building] :: 10.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 10.1.1 1.00 mm thick with zinc coating not less than 275 gm/m2 |
| 6 | Item Code [2022 11.18.2]:Item Type [building] :: Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm |
| 7 | Item Code [2022 11.38.1]:Item Type [building] :: 11.38 Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for pavingspecification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement).M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 15658:2006 (A) Category A Denated units to key into each other on four faces zigzag shape as per IRC SP 63:2004 |
| 8 | Item Code [2022 11.38.3 (A)]:Item Type [building] :: Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement M40, 80mm thick to be used in medium- traffic ( Medium traffic is defined as a daily traffic of 150-450 commercial vehicles exceeding 30 KN laden weight, or an equivalent of 0.5 to 2.0 MSA for a design life of 20 years.) like city streets, small and medium market roads, low volume roads, utility cuts on arterial roads, etc (A) Category A Denated units to key into each other on four faces zigzag shape as per IRC SP 63:2004 |
| 9 | Item Code [2022 12.3.2]:Item Type [building] :: Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick |
| 10 | Item Code [2022 12.43.1]:Item Type [building] :: Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work |
| 11 | Item Code [2022 2.7.4]:Item Type [building] :: P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: 2.7.4 (-do-) Long body, 15mm nominal bore weight not less than690 GM |
| 12 | Item Code [2022 3.1.1 M20]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 13 | Item Code [2022 3.1.6]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 14 | Item Code [2022 3.16.2]:Item Type [building] :: P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 3.16.2 75 mm dia |
| 15 | Item Code [2022 3.16.3]:Item Type [building] :: P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia |
| 16 | Item Code [2022 4.1 new]:Item Type [building] :: Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 17 | Item Code [2022 4.13.3]:Item Type [building] :: Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. (Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786)Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 18 | Item Code [2022 4.6.1]:Item Type [building] :: Add extra for providing richer mixes respectively at all floor levels Providing M-25 grade concrete by using cement as per codalprovision instead of M-20 grade design mix. |
| 19 | Item Code [2022 4.9 new]:Item Type [building] :: Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc |
| 20 | Item Code [2022 5.2.2]:Item Type [building] :: Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 21 | Item Code [2022 6.1.6 SM 1:6]:Item Type [building] :: Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 22 | Item Code [2022 6.2.6]:Item Type [building] :: Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 23 | Item Code [2022 9.8 gate & grating]:Item Type [building] :: Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 24 | Item Code [2022 CARRIAGE G 4.1]:Item Type [building] ::Earth, Sand, Lime, Morrum manure or sludge Sub Item Code [2022 CARRIAGE G 4.1 + 4.1]: Earth, Sand, Lime, Morrum manure or sludge For 1 Km. |
| 25 | Item Code [2022 S 1.36]:Item Type [building] :: Sub Item Code [2022 S 1.36 + 1.36.1]: WASH BASINS: P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 450 mm x 300 mm |
| 26 | Item Code [2022 S 4.2.3]:Item Type [building] :: Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 150 mm dia Nominal bore |
| 27 | Item Code [2022 S 4.5.4]:Item Type [building] :: Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. 200 mm Nominal bore of pipe |
| 28 | Item Code [BSR2022 11.26]:Item Type [building] :: Random rubble dry stone Kharanja under floor. |
| 29 | Item Code [building 2022 1.14.1]:Item Type [building] :: P & F Ist quality WVC Urinal (IS : 2556 mark) with 25 mm dia C.I. waste pipe dome waste coupling concealed iron brackets or screw etc complete Mini stall size 455 x 385 x 350 mm |
| 30 | Item Code [building 2022 S 1.43.1]:Item Type [building] :: P & F waste pipe with all fitting PVC with C.P. nut 32 mm |
| 31 | Item Code [pwd bsr 2022 2.7.1]:Item Type [building] :: P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Brass 400 gm,15mm nominal bore. |
| 32 | Item Code [S 2022 2.26]:Item Type [building] :: Sub Item Code [S 2022 2.26 + 2.26.3]: P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity |
| 33 | Item Code [S-2.39 2022]:Item Type [building] :: Sub Item Code [S-2.39 2022 + 2.39.1]: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 15 mm nomial size |
| 34 | Item Code [S-2.39 2022]:Item Type [building] :: Sub Item Code [S-2.39 2022 + 2.39.3]: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 25 mm nomial size Please Enable Macros to View BoQ information |
