|
| 1 | CONSTRUCTION PUMP HOUSE : Earth work in excavation of foundation in all kinds soil within initial lead of 50mts.& lift of 1.50mts. including dressing and levelling the bed etc.complete. |
| 2 | Filling foundation & plinth with sand including cost of all labour, materials, carriage, royality, watering and ramming etc. complete. |
| 3 | C.C.(1:4:8) in foundation using 4cm.size H.G.C.B. metal including cost of all labour, materials, carriage, royality, curing etc. complete. |
| 4 | Fly Ash Brick masonry in C.M.(1:6) in F&P including cost of all labour, materials, carriage, royality, etc. complete |
| 5 | Fly Ash Brick masonry in C.M.(1:6) in Super Structure including cost of all labour, materials, carriage, royality, etc. complete |
| 6 | 12mm. thick C.P.(1:4) with punning and bitumen painting including cost of labour ,materials, carriage, royality, curing and T&P etc. complete. |
| 7 | Filling Foundation and plinth with excavated materials including cost of all labour, T & P etc. complete. |
| 8 | Rigid smooth centering and shuttering for R.C.C. works including false work and dismantling them after casting, cost of all labour, materials, T & P etc. complete. i.Roof slab & RCC Chajja |
| 9 | Plinth Band |
| 10 | Lintel |
| 11 | R.C.C. (1:2:4) using 12mm. size H.G.C.B. chips including cost of labour, materials, carriage, royality, curing, centering and shutering etc. complete. |
| 12 | M.S. reinforcement for R.C.C. work including cutting, bending, binding, tying the grills ,placing in position, cost & conveyance of steel etc. complete. |
| 13 | 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm.size HGCB chips including cost of all labour, materials, carriage, royality, curing, T&P etc. complete. |
| 14 | 12mm.thick C.P.(1:6) to outer walls including cost of all labour ,materials, carriage, royality, curing and T&P etc. complete. |
| 15 | 16mm. thick C.P.(1:6) to inner walls including cost of all labour ,materials, carriage, royality, curing and T&P etc. complete. |
| 16 | 12mm. thick C.P.(1:6) with puning including cost of labour ,materials, carriage, royality, curing and T&P etc. complete. |
| 17 | 6mm thick C.P. (1:4) to R.C.C. surface finished smooth including closed deep chiping and slury treatment. |
| 18 | C.C.(1:3:6) below Flooring using 4cm.size H.G.C.B. metal including cost of all labour, materials, carriage, royality, curing , T & P etc. complete. |
| 19 | 2.5cm thick A.S. flooring (1:2:4) using 12mm.size HGCB chips including cost of all labour, materials, carriage, royality, curing, T&P etc. complete. |
| 20 | Supplying, fitting and fixing of M.S.door.shutter with choukhat of approed design and made of C.R. sheet ,M.S.flat, and M.S. angle including labour charges of fabrication, fabricated iron aldrop, tower bolt, handle etc.complete. |
| 21 | Supplying all labour T&P and materials at site for providing & fixing in position 50mm thick precast concrete Jally (1:2:4) with HG chips of 12mm size as sky light including roughening, cleaning, fixing & finishing in C.M (1:3) etc. complete as per direction of Engineer-In-Charge. |
| 22 | Cement painting two coats over a coat of cement washing including cost of all labour, materials, T&P etc. complete. |
| 23 | Distempering two coats with any approved shade including cost of all labour, materials, etc. complete. |
| 24 | Painting two coats over a coat of priming of any approved shade including cost of all labour, paint, primer, T & P etc. complete. |
| 25 | Const. of compound wall : Earth work in excavation of foundation in all kind of soil with in initial lead of 50mt & initial lift of 1.50mt including dressing & levelling the bed etc. complete |
| 26 | Filling in foundation and plinth with sand including cost of all labour, materials, carriage, royalty, watering & ramming etc. complete. |
| 27 | CC (1:4:8) in foundation using 4 cm size HGCB granite Metal including all cost of conveyance and royalty of materials. |
| 28 | Fly Ash brick masonry in C:M. (1:6) in F&P including cost of all labour, materials, carriage, royalty, etc. Complete |
| 29 | Fly Ash brick masonry in C.M. (1:6) in Super structure including cost of all labour, materials, carriage, royalty, etc. Complete |
| 30 | Filling foundation and plinth with excavated materials including cost of all labour, T&P etc. complete. |
| 31 | 2.5 cm thick Damo proof Course in C.C. (1:2:4) using 12 mm size hard broken granite chips including cost of all materials, labour, carriage, royalty, curing and taxes etc. Complete. |
| 32 | 12mm thick CP (1:6) to outer walls including cost of all labour, materials, carriage, royalty, curing etc. Complete. (Both side Walls) |
| 33 | 16mm thick C.P. (1:6) to inner walls including cost of all labour, materials, carriage, royalty, curing and T&P etc. Complete. (Both side Walls) |
| 34 | Supplying and fixing M.S grill gate of size 8’0” x 4’0” including cost of all materials, labour, conveyance and taxes etc. Complete. @2 Kg/sft |
| 35 | Priming one coat over the cement plaster including cost of all labour, materials, T&P etc. complete. |
| 36 | Weather coat two coats of any approved shade including cost of all labour, materials, T&P etc. complete. |
| 37 | Painting two coats over a coat of priming of any approved shade including cost of all labour, paint, primer, T&P etc. Complete. |
| 38 | Site Development & Approach Road : Earth work in excavation of foundation in all kinds’ soil within initial lead of 50mts & lift of 1.50mts. Including dressing and levelling the bed etc. Complete. |
| 39 | Filling in foundation and plight with sand including cost of all labour, materials, carriage, royalty, watering & ramming etc. Complete. |
| 40 | C.C. (1:3:6) in foundation using 12mm.size HGCB chips including cost of all labour, materials, carriage, royality, curing etc. Complete. |
| 41 | C.C. (1:2:4) in foundation using 12mm.size HGCB chips including cost of all labour, materials, carriage, royality, curing etc. Complete. |
| 42 | Internal electrification : Supplying fitting & fixing 200 Amp TPN HRC Type main switch with supply of MS clamp, nut bolt & other jointing materials |
| 43 | Supplying fitting & fixing 100 Amp TPN HRC Type main switch with supply of MS clamp, nut bolt & other jointing materials |
| 44 | Supplying fitting & fixing 200 Amp 4 way copper bus bar with supply of MS clamp, nut bolt & other jointing materials |
| 45 | Supplying fitting & fixing 200 Amp BPC make extension type kit kat with supply of MS clamp, nut bolt & other jointing |
| 46 | Supplying fitting & fixing main earth with 32 mm dia Gl pipe with supply of MS clamp, nut bolt & other jointing materials CI cover & other jointing material including earth excavation. |
| 47 | Suplplying fitting & fixing suitable earth bus bar for earthing connection. |
| 48 | Supplying crimping 50 sqmm heavy duty crimping socket 7/16 pvc copper wire including connection & testing. |
| 49 | Supplying of all material labour, T&P & wiring with 3x19/16 pvc copper wire inside 38 mm dia. Pvc conduit pipe with no-6 GI. |
| 50 | Supplying of all material labour, T&P & wiring with 3x7/16 pvc copper wire inside 25 mm dia. Pvc conduit pipe with no-6 GI wire as running earth & other jointing material (from busbar to 4 nos sub main switch then to control pannel board then to two nos centrifugal motors) |
| 51 | Supplying of all labour T&P & fixing control pannel board including supply of nut & bolt & other jointing material in-cluding conveyance of control pannel board to site with testing charge. |
| 52 | Supplying & fixing 5/8 x 18\\" long heavy type bolt for foundation with motor pump assembling at foundation base plate with other balancing material. |
| 53 | Supplying of all labour T&P for coupling motor & pump. |
| 54 | DISTRIBUTION SYSTEM & RISING MAIN (Part-A) : Supplying all labour T&P materials for earth work in excavation of foundation in all kinds of soil (ordinary, Hard and slushy soil) including fine dressing and leveling the bed with in initial lead of 50 mtr and initial lift of 1.50 mtr etc all complete as per the direction of EIC. (excavation of earth to be done 0.90 mtr above the dia of pipe and 0.30mtr wider than the dia of pipe) |
| 55 | Laying in benches centifugally cast (spun) Ductile Iron pressure socket and spigot pipes class KG with cement mortar lining conforming to 18329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing Including cost of pipe. i.200mm dia DI Pipes (Class-K9) |
| 56 | Providing push-on-joints conforming to IS:3114-1994 to Centrifugally Cipun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Contunning to 15 5382 of SBR quality including cost of rubber gasket testing of joints as per specification complete. i.200mm dia DI Pipes (Class-K9) |
| 57 | Supply fitting foxing & Laying in trenches double socket Ductile Iron Bends conforming to IS 1538 (Part-X) as per specification all complete, including cost of bend. i.200mm dia DI Pipes (Class-K9) |
| 58 | Laying in trenches double socket Ductile fron collars conforming to IS 1538 (Part-(X) as per specification all complete, including cost of collar. i.200mm dia DI Pipes (Class-K9) |
| 59 | Laying in trenches double socket Ductile Iron Tee conforming to IS. 1538 Part-XI) as per specification all complete, including cost of tee. i.200 x 150mm DI Tee |
| 60 | Laying in trenches Ductile Iron Plugs conforming to IS 1538-1993 (part-XVI) of the foliowing nominal diameter as per specification complete, including cost of material. i.200mm dia DI Pipes (Class-K9) |
| 61 | Laying in trenches Double Flanged Duck foot Bend conforming to IS: 1538-1993 (part-XVI). i.200mm dia DI Pipes (Class-K9) |
| 62 | Supplying all labour T&P materials and construction of thrust block for duck foot bend with excavated materials including watering and ramming ll complete as per the direction of EIC i.200mm dia DI Pipes |
| 63 | Supplying all labour T&P materials and refilling the pipe line trench with excavated materials including watering and ramming all complete as per the direction of E.I.C. |
| 64 | Supplying all labour T&P materials, fitting and fixing of CI sluice valves/ NR valve with double flanged ends for water works purposes for the following rating and nominal diameter including cost of nut bolt and rubber insertion transportation charges all complete as per specification and direction of EIC, but excluding the cost of CI sluice valves / N.R. valves which will be supplied by the department. i.200 mm DI (D/F) butterfly valve (standard) PN-1.0 |
| 65 | 200 mm DI (D/F) NR Valve (standard) PN-1.0 |
| 66 | 150 mm DI (D/F) NR Valve (standard) PN-1.0 |
| 67 | Supplying all labour T&P materials, and fixing of single Air valve for water works purposes for the following diameter, including drilling the water main but excluding cost of Air valve and saddle complete as per specification and direction of EIC (Air valve & saddle will be supplied by the Deptt) i.25mm dia DI Single Air valve. |
| 68 | Supplying all materials, labour T&P for construction of sluice valve and NR valve chamber of inside size 0.90mx0.90mx1.20m in Brick masonry in cement mortar(16) using 25cmx12cmx8cmsize Fly-ash brick of wall thickness 25cm over 15cm thick base concrete in cement concrete (14:8)using 40mm size crusher broken hard granite metal, plastering inside wall, outside wall 30cm from top and top of wall in cement mortar(1:6)with neat cement punning providing 7.5cm thick precast RCC cover siab (two pieces)in cement concrete(1.24)using 12mm size crusher broken hard granite chips with 15kg MS reinforcement including excavation of chamber in all kinds of soil and refilling outside including transportation, taxes & royalties etc all complete as per direction of Engineer-in-charge. i.80mm to 350mm CI SV/NRV |
| 69 | Supplying all materials, labour T&P and cutting metalled road for taking pipe line through and making good the damaged as per direction of EIC. i.Metalled Road |
| 70 | Supplying all labour, T&P for cutting CC Road for laying of Pipe. |
| 71 | Supplying all labour, T&P for C.C. (1:24) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of Pipe line with all complete. |
| 72 | Suppying of all material, labour, T&P, welding rod, Gas etc for fabricating & welding different sizes of Gl pipes & specials. The rates are inclusive of fabrication of Gl bend/ Tee/ RS & offsets as per required angle & as per site condition including welding & jointing with GI flanges as & when required of sizes including earth work with priming one coat with red oxide primer & painting two coats at joints All the equipments are taken to site & welding by DC Generator set fitted at site etc complete as per direction of Engineer-in-charge. i.100 mm Gl pipe (tata/jindal medium) |
| 73 | 150 mm Gl pipe (tata/jindal medium) |
| 74 | 200 mm Gl pipe (tata/jindal medium) |
| 75 | Supplying & Laying in trenches M.S. Pipes of all Classes confirming to IS:3589-2001 & IS:3601-2006 of the following outside dia as per specification etc. Complete. (E. W. in trenches, jointing of pipes, specials & fittings to be measured separately) including cost of MS pipe. i.219.1mm OD 6.30mm thick MS Pipe. |
| 76 | Supplying of MS flanges of MS plate confirming IS specification with grinding, polishing, testing etc all complete as per specification. i.219.1mm OD 6.30mm thick MS Pipe. |
| 77 | Supplying all materials, labour, T&P for flame Cutting & facing of M.S. Plate upto 8mm thick as per specification etc. complete. i.219.1mm OD MS Pipe. |
| 78 | Providing joints by welding with two welding beads/Pass, confirming to IS:816-1998 (Single 60* Butt Weld) to M.S. Pipes & fittings at site by using welding generator including testing of joints, as per specification complete. i.219.1mm OD MS Pipe. |
| 79 | Supply of electric driven submersible pump set (three phase) with 100% stand by with all reqired fittings i.e. Contol panal, Flat cable, Armored cable, rubber mat etc. including lowering of pumpset. A.Pump & Motor - Jhadiamba WTP 1.Supplying of centrifigual pump motor set suitable at reservoir including all taxes and carriage of materials and lowering of Submerssible pump set including all necessary connection etc. complete as per the direction of Engineer in charge with 100% Standby. i.30HP (H-50.0 mtr, D-30 Lps) |
| 80 | Stand by |
| 81 | Supplying of Auto start three phase Auto Transformer Starter control panel for centrifigual pump as per ISI specification suitable for the for above variable speed submerssible pump set as above including installation and cost of all taxes etc. complete as per the direction of Engineer in charge. |
| 82 | Supplying of 10 sqmm. three core submerssible flat cable of reputed brand i.e. Finolex or Havels made with ISI marked including cost of all taxes and carriage etc. complete as per the direction of Engineer in charge. |
| 83 | Supply of 25sqmm 3 1/2 core Aluminium Armoured cable. |
| 84 | Supply of 1000 x2000mm Shock Proof Rubber mat having thickness 13mm capable of withstanding 5W.V. confirming to its specification (10kg) |
| 85 | Supplying of all labour, T&P and installation of 30 HP centrifugal pump set including lowering of column pipe with supply of Nut Bolt, rubber insertion sheet, installation of control pannel board, laying of flat cable & armoured cable through suitable casing pipe including earth work and cost of all materials etc. all complete. |
| 86 | B. Pump & Motor - Pandarvarania Middle Head Works : Supplying of Horizontal Centrifugual pump motor set suitable at reservoir including all taxes and carriage of materials and lowering of Submerssible pump set including all necessary connection etc. complete as per the direction of Engineer in charge with 100% Standby. i.25HP (H-50.0 mtr, D-25 Lps) |
| 87 | Supplying of Auto start three phase Auto Transformer Starter control panel for horizontal submersible pump as per ISI specification suitable for the for above variable speed submerssible pump set as above including installation and cost of all taxes etc. complete as per the direction of Engineer in charge. |
| 88 | Supplying of 10 sqmm. three core submerssible flat cable of reputed brand i.e. Finolex or Havels made with ISI marked including cost of all taxes and carriage etc. complete as per the direction of Engineer in charge. |
| 89 | Supply of 25 Sqmm 31/2 core Aluminium Armoured cable (Nicco make) |
| 90 | Supply of 1000 x2000mm Shock Proof Rubber mat having thickness 13mm capable of withstanding 5W.V. confirming to its specification (10kg) |
| 91 | Supplying of all labour, T&P and installation of 25 HP submersible pump set including lowering of column pipe with supply of Nut Bolt, rubber insertion sheet, installation of control pannel board, laying of flat cable & armoured cable through suitable casing pipe including earth work and cost of all materials etc. all complete. |
| 92 | C. Pump & Motor-Pandarvarania & Majhika Middle Head Works : Supplying of Horizontal Centrifugual pump motor set suitable at reservoir including all taxes and carriage of materials and lowering of Submerssible pump set including all necessary connection etc. complete as per the direction of Engineer in charge with 100% Standby. i.7.5HP (H-50.0 mtr, D-5 Lps) |
| 93 | Supplying of Auto start three phase Auto Transformer Starter control panel for horizontal submersible pump as per ISI specification suitable for the for above variable speed submerssible pump set as above including installation and cost of all taxes etc. complete as per the direction of Engineer in charge. |
| 94 | Supplying of 10 sqmm. three core submerssible flat cable of reputed brand i.e. Finolex or Havels made with ISI marked including cost of all taxes and carriage etc. complete as per the direction of Engineer in charge. |
| 95 | Supply of 25 Sqmm 31/2 core Aluminium Armoured cable (Nicco make) |
| 96 | Supply of 1000 x2000mm Shock Proof Rubber mat having thickness 13mm capable of withstanding 5W.V. confirming to its specification (10kg) |
| 97 | Supplying of all labour, T&P and installation of 7.5 HP submersible pump set including lowering of column pipe with supply of Nut Bolt, rubber insertion sheet, installation of control pannel board, laying of flat cable & armoured cable through suitable casing pipe including earth work and cost of all materials etc. all complete. |
| 98 | DISTRIBUTION SYSTEM & RISING MAIN (Part-B) : Supplying all labour T&P materials for earth work in excavation of foundation in all kinds of soil (ordinary, Hard and slushy soil) including fine dressing and leveling the bed with in initial lead of 50 mtr and initial lift of 1.50 mtr etc all complete as per the direction of EIC. (excavation of earth to be done 0.90 mtr above the dia of pipe and 0.30mtr wider than the dia of pipe) |
| 99 | Laying in benches centifugally cast (spun) Ductile Iron pressure socket and spigot pipes class KG with cement mortar lining conforming to 18329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing Including cost of pipe. i.200mm dia DI Pipes (Class-K9) |
| 100 | Providing push-on-joints conforming to IS:3114-1994 to Centrifugally Cipun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Contunning to 15 5382 of SBR quality including cost of rubber gasket testing of joints as per specification complete. i.200mm dia DI Pipes (Class-K9) |
| 101 | Supply fitting foxing & Laying in trenches double socket Ductile Iron Bends conforming to IS 1538 (Part-X) as per specification all complete, including cost of bend. i.200mm dia DI Pipes (Class-K9) |
| 102 | Laying in trenches double socket Ductile fron collars conforming to IS 1538 (Part-(X) as per specification all complete, including cost of collar. i.200mm dia DI Pipes (Class-K9) |
| 103 | Laying in trenches double socket Ductile Iron Tee conforming to IS. 1538 Part-XI) as per specification all complete, including cost of tee. i.200 x 150mm DI Tee |
| 104 | Laying in trenches Ductile Iron Plugs conforming to IS 1538-1993 (part-XVI) of the foliowing nominal diameter as per specification complete, including cost of material. i.200mm dia DI Pipes (Class-K9) |
| 105 | Laying in trenches Double Flanged Duck foot Bend conforming to IS: 1538-1993 (part-XVI). i.200mm dia DI Pipes (Class-K9) |
| 106 | Supplying all labour T&P materials and construction of thrust block for duck foot bend with excavated materials including watering and ramming ll complete as per the direction of EIC i.200mm dia DI Pipes |
| 107 | Supplying all labour T&P materials and refilling the pipe line trench with excavated materials including watering and ramming all complete as per the direction of E.I.C. |
| 108 | Supplying all labour T&P materials, fitting and fixing of CI sluice valves/ NR valve with double flanged ends for water works purposes for the following rating and nominal diameter including cost of nut bolt and rubber insertion transportation charges all complete as per specification and direction of EIC, but excluding the cost of CI sluice valves / N.R. valves which will be supplied by the department. i.200 mm DI (D/F) butterfly valve (standard) PN-1.0 |
| 109 | 150 mm DI (D/F) butterfly valve (standard) PN-1.0 |
| 110 | 200 mm DI (D/F) NR Valve (standard) PN-1.0 |
| 111 | Supplying all labour T&P materials, and fixing of single Air valve for water works purposes for the following diameter, including drilling the water main but excluding cost of Air valve and saddle complete as per specification and direction of EIC (Air valve & saddle will be supplied by the Deptt) i.25mm dia DI Single Air valve. |
| 112 | Supplying all materials, labour T&P for construction of sluice valve and NR valve chamber of inside size 0.90mx0.90mx1.20m in Brick masonry in cement mortar(16) using 25cmx12cmx8cmsize Fly-ash brick of wall thickness 25cm over 15cm thick base concrete in cement concrete (14:8)using 40mm size crusher broken hard granite metal, plastering inside wall, outside wall 30cm from top and top of wall in cement mortar(1:6)with neat cement punning providing 7.5cm thick precast RCC cover siab (two pieces)in cement concrete(1.24)using 12mm size crusher broken hard granite chips with 15kg MS reinforcement including excavation of chamber in all kinds of soil and refilling outside including transportation, taxes & royalties etc all complete as per direction of Engineer-in-charge. i.80mm to 350mm CI SV/NRV |
| 113 | Supplying all materials, labour T&P and cutting metalled road for taking pipe line through and making good the damaged as per direction of EIC. i.Metalled Road |
| 114 | Ashplat or Bituminous road |
| 115 | Supplying all labour, T&P for cutting CC Road for laying of Pipe. |
| 116 | Supplying all labour, T&P for C.C. (1:24) with 12mm size hard granite chips and mending good the damages of C.C. Road for laying of Pipe line with all complete. |
| 117 | Suppying of all material, labour, T&P, welding rod, Gas etc for fabricating & welding different sizes of Gl pipes & specials. The rates are inclusive of fabrication of Gl bend/ Tee/ RS & offsets as per required angle & as per site condition including welding & jointing with GI flanges as & when required of sizes including earth work with priming one coat with red oxide primer & painting two coats at joints All the equipments are taken to site & welding by DC Generator set fitted at site etc complete as per direction of Engineer-in-charge. i.150 mm Gl pipe (tata/jindal medium) |
| 118 | 200 mm Gl pipe (tata/jindal medium) |
| 119 | Construction, Testing & Commissioning of RCC Under Ground storage reservoir 2,00,000 ltr. Capacity including cost of all labour, materials, pipes, fittings, valves, lighting arrestor, steel ladder etc. complete as per approved drawing, design and the direction of E.I.C. |
| 120 | The contractor shall maintain the PWS project for Five (5) calendar years from the completion date of defect liability period of one year in such a manner that all the house hold of the PWS Scheme covered area will get (adequate) required quantity of supply water taking supply hour as 8hour/day without facing any problem.The contractor shall repair and replace any types of defect arise within 24 hr of receipt of complaint either from public or from Department. The contractor shall maintain all structure of the PWS schemes as per terms and conditions of DTCN & technical specification mentioned in Section-5. (OM for 5years) Part-A |
| 121 | The contractor shall maintain the PWS project for Five (5) calendar years from the completion date of defect liability period of one year in such a manner that all the house hold of the PWS Scheme covered area will get (adequate) required quantity of supply water taking supply hour as 8hour/day without facing any problem.The contractor shall repair and replace any types of defect arise within 24 hr of receipt of complaint either from public or from Department. The contractor shall maintain all structure of the PWS schemes as per terms and conditions of DTCN & technical specification mentioned in Section-5. (OM for 5years) Part-B Please Enable Macros to View BoQ information |
