Tender For Provn Of Urc Infrastructure Alongwith Associated Work At 15 Brd Under Ge (Af) Chiloda
Tender Value
2 Crore
Estimated cost
Bid Submission
27 Aug 2026
5 days left
EMD
2.75 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Urc Infrastructure Alongwith Associated Work At 15 Brd Under Ge (Af) Chiloda
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Jul-2026 | Corrigendum1 | Date | 06-Aug-2026 |
| 2 | 29-Jul-2026 | Corrigendum 2 | Date | 17-Aug-2026 |
| 3 | 08-Aug-2026 | Corrigendum3 | Date | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | BOQ 82327/CHL/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE (AF) CHILODA Name of Work: PROVN OF URC INFRASTRUCTURE ALONGWITH ASSOCIATED WORK AT 15 BRD UNDER GE (AF) CHILODA CA No : CWE (AF) CHILODA /CHL / OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | NOTE: Schedule ‘A’ Part I to X under Ser No. 1 to 10 here in after are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only. |
| 3 | Lump sum price worked out for BUILDING/ STRUCTURE as listed in Sch 'A’ Part I. |
| 4 | Lump sum price worked out for EXCAVATION & EARTH WORK as listed in Sch 'A’ Part II. |
| 5 | Lump sum price worked out for INTERNAL WATER SUPPLY as listed in Sch 'A’ Part III. |
| 6 | Lump sum price worked out for INTERNAL ELECTRIFICATION as listed in Sch 'A’ Part IV. |
| 7 | Lump sum price worked out for SEWAGE DISPOSAL as listed in Sch 'A’ Part V. |
| 8 | Lump sum price worked out for AREA DRAINAGE as listed in Sch 'A’ Part VI |
| 9 | Lump sum price worked out for ROAD/ PATH / HARDSTANDING as listed in Sch 'A’ Part VII. |
| 10 | Lump sum price worked out for EXTERNAL WATER SUPPLY as listed in Sch 'A’ Part VIII |
| 11 | Lump sum price worked out for EXTERNAL ELECTRIC SUPPLY as listed in Sch 'A’ Part IX |
| 12 | Lump sum price worked out for DEMOLITION AND DISMANTLING as listed in Sch 'A’ Part X |
| 13 | Lump sum price worked out for COMPOUND WALL as listed in Sch 'A’ Part XI |
| 14 | Lump sum price worked out for WATER COOLER as listed in Sch 'A’ Part XII |
| 15 | Lump sum price worked out for FIRE HYDRANT as listed in Sch 'A’ Part XIII |
| 16 | Lump sum price worked out for FIRE ALARM as listed in Sch 'A’ Part XIV |
| 17 | SCHEDULE `A' PART-XV (MISCELLANEOUS ITEMS)(Note for following items- The contractor shall quote his rate for each of these items separately. The estimated rate is left blank since the same is not prepriced by MES) |
| 18 | SEWAGE DISPOSAL |
| 19 | M&L for RCC NP2 150 mm dia laid on 150 mm th PCC (1:4:8) bed with excavation in any type of soil , including manhole/drop manhole of standard size made of PCC block masonary with SFRC ventilating cover and frame including all requiste items and activities to execute and make sewer line functional (nexc 1.65 m) |
| 20 | EXTERNAL WATER SUPPLY |
| 21 | M&L for Brick masonry valve pit of size 600x600x700mm with necessary excavation and earth work, PCC 1:3:6 type C2 in foundation, brick work with old size brick in CM 1:6, 15 mm thick rendering in CM 1:4 (internally), 5mm thick MS plate cover including M.S angle iron 50x50x5 frame including material & labour for preparation of new iron surface & applying two coats of synthetic enamel paint over a coat of red oxide primer with and including locking arrangement complete all as specified and all as directed by Engr-in-Charge |
| 22 | EXTERNAL ELECTRIC SUPPLY |
| 23 | S&F mounting bracket double arm forming Cap type having an interior angle of 120 degree made out of GI pipe Med grade suitable dia for fixing to street light fittings on the poles not less than 1.5 meter long duly painted with aluminium paint two coats Complete all as specified and directed by Engr-in-Charge. |
| 24 | S&F looping box (enclosures) of size 300 x 250 x 150 mm made of PVC comprising of 02 Nos bus bar 100 Amps rating fixed on porcelain insulators, earthing terminal and one MCB SP 6 Amp including MS bracket, nut an bolts .Complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F automatic Switch complete pole mounted enclosure consisting of MCBs, Power Contactor and SMC Enclosure conforming to IP 54) for encasing full 1- phase circuit board along with automatic Switch-01, Model No SWADEEP – 02EC 3kW1P (for 3-5kW load equally distributed over 1-phase) or equivalent make as approved by Engr-in-Charge/GE incl all electrical connection Complete all as specified and directed by Engr-in-Charge. |
| 26 | Material and labour for boring of holes under road, pavement, hard standing by trenchless technology using ultra sound techinque and necessary machine including GI pipe of 50 mm dia, light grade for drawing under ground cable etc complete all as specified and as directed.Complete all as specified and directed by Eingr-in-Charge. |
| 27 | M & L for maintenance free technology Chemical earthing with copper bonded steel rod 3 mtr long 25.0 mm dia with 250-micron Copper bonded coating and UL listed. There should be terminal for connection of 150 x 50 x 6 mm with 4 holes of 12 mm dia along with 2 bags of 25 Kgs each of earth enhancing compound. The chemical compound should be tested and certified by any NABL accredited laboratory with 95 percent carbon content. The testing laboratory should be an ISO 9001 and 14001 certified. The earth enhancing compound should be IEC 62321. The ph value of compound should be 7-8. Electrode should be duly tested and certified by CPRI, Govt of India for a min short circuit current of 25 kA rms for 1 Sec. including necessary boring of suitable dia upto required depth in any type of soil for inserting copper rod and filling of chemicals and Poly plastic pit cover of material- polymer body & cover dimensions- 308 mm (L) x 308 mm (W) x 214 mm (H) bearing capacity 7.5 Ton approved from NABL approved Lab complete all as specified and as directed. |
| 28 | Note:- (i) Earthing is to be done infront of the Engr-in-Charge. (ii) Test Results of earthing to be submitted by the contractor for all earthings.(iii) The Contractor shall have to give written guarantee for maintenance earth resistance of less than 1.0 Ohm for the period of 10 (ten) years after certified date of completion and shall be deposited 2000/- per earthing as security deposit for a period of Ten (10) Years.(iv) Failing to maintain resistance of earthing less than 01.0 ohm , new earthing to be provided by the contractor with out any extra cost to Govt.(v) Necessary earth work, excavation shall be carried out in any type of soil strata, retuning, filling in and making good surrounding area shall be deemed to be included in quoted rate complete. |
| 29 | FIRE HYDRANT. |
| 30 | Material and labour for boring of holes under road, pavement, hard standing by trenchless technology using ultra sound techinque and necessary machine including ERW MS pipe of 100 mm dia, heavy grade.complete as specified and as directed.Complete all as specified and directed by Engr-in-Charge. |
| 31 | S & F Fire extinguiser dry powder type (ABC) 5 Kg complete all as specified and directed by Engr-in-Charge. |
| 32 | S & F Fire extinguiser carbon dioxide (CO2) 4.5 KG complete all as specified and directed by Engr-in-Charge. |
| 33 | INTERNAL ELECTRIFICATION |
| 34 | M&L for testing and commissioning (SITC) of Modular Type Air Conditioner Control Box consisting of FR-grade modular enclosure, 20A/25A Double pole (DP) Isolator, 20A/25A DP MCB (C Curve) 10 KA Breaking Capacity, LED Power indication lamp, suitable busbar, terminals, internal wiring earthing arrangement, gland and all necessary accessories, complete as required for operation of split air conditioner units up to 2.0 TR capacity. |
| 35 | M&L for installation, testing and commissioning of Vertical TPN Distribution Board (Double Door DB) suitable for 415V,3 phase, 4 wire, 50Hz AC supply system fabricated from CRCA Sheet steel,powder coated , wall mounted/floor mounted as required , complete with busbars , neutral link, earth bar, gland plate, wiring and all accessories complete all as specified and directed. |
| 36 | S & F LED batten fitting alongwith removable LED Tube 20W, 230 Volt, wall /ceiling mounted ,LED batten fixed by means of bolts,ABS rotor suitable for single side connections. LED rod having glass material complete haivng lumen efficacy minimum 100 lm/w,CCT 6500 K, CRI>80 ,burning hour minimum 25000,PF - 0.9 powered by integral constant current driver suitable for 230 V AC with all accessories internallly prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 37 | Supply & fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type100 lm/w,CCT 6500 K, CRI>80 ,burning hour minimum 25000, PF - 0.9, with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 38 | Supply and fixing (BLDC) ceiling fans complete with blades down rods remote control unit with battery 02 Nos and accessories 230 Volt 1200 mm sweep min air delivery 240 cu m/min with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed. |
| 39 | M&L for PVC box flush mounted 100mm x 100 mm x 100mm having holes for 20mm conduit entry including 2 pin TV socket outlet flush type duly marked with symbol of TV and 3 mm thick plastic laminated sheet cover complete for telephone connection all as specified |
| 40 | Supplying,installing,testing and commissioning in replacement of indoor type totally enclosed weather ,dust & vermin proof CPRI approved factory made LT wall mounted meter panel board 415 volt, 3 phase, 4 wires,AC,50 Hz fabricated from 2.00 mm thick CRCA sheet steel and epoxy powder coating in RAL 7032 shade with seven tank treatment process,front opening hinged door with a fully transparent cover made of polycarbonate/high grade engineering plastic to permit clear view of display,locking arrangement,Aluminum busbar 250 amp ,20 mm x 5 mm insulated with heat shrinkable sleeves, appropriate space for fixing single phase energy meter 05 Nos,hold fast/fastener/bolts/copper lugs/spacers/terminal blocks,rubber gasket,locking knobs,phenolic laminated sheets for live isolation ,heat shrinkable sleeves, nuts,bolts,washers,connections from MCCB to busbar,busbar to meter & meter to MCB with single core copper cable of size 6.0 sqmm connection , R- Y-B LED indications to show 3 phase availability at incomer including the following :-(a) 01 No (in coming) MCCB 63 Amps , 415 volts,4 pole, 16 KA, thermally adjustable between 70 to 100 %.(b) Temper proof electric meters 3 phase -01 No alongwith sealing, making sticker of bldgNo in suitable size for identification etc all as directed by engr -in charge(c) 1 No MCB DP 40 Amp,10 KA, 'C' series as approved ( one number in each outgoing side of meter) Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 17, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender