| 1 | Orbital Hydraulic pump (High Torque, low speed) Displacement-80.5 cm3 /rev, Continu ous speed -810 RPM, Peak torque-260Nm, Continuous torque -240Nm, Max pressure drop-225 bar, M ax oil flow- 65-75 L/min, Rotation Bidirectional, Mounting 4 bolts, Max inlet pressure-210 bar, starting pressure- 12 bar, Make- KSB/Danfoss/Grundfoss ] |
| 2 | Overload Relay pole Thermal Bimetal overload Relay Current range: 1.6 A-2.5A, trip cl ass 10A, Standard: IS/IEC 60947, rated Operational Voltage: 690VAC, rated insulation Voltage-690, I mpulse Voltage; 6 KV, Power loss- 0.9W, Terminal Type-Screw Type M4. Make- Siemens/ Schneider/ ABB ] |
| 3 | Contactor, Type-SICO P series No. of poles- 3 , Auxillary Contact 1 NO + 1NC , Coil volt age-110V AC, 50Hz, Operational Current- 9A,, Insulation Voltage- 690V, Impulse Voltage-8 KV, Termi nal Type: Sigut, Make- Siemens /Schneider / ABB ] |
| 4 | Limit Switch, Operating Volatge-415 VAC Thermal Current- 10A, Operating current-1.5 A, Contact type- 1NO+ 1NC(SPDT), Terminal capacity- 2.5 mm2 , Solid or stranded wire, Operating fr equency up to 2500 operation per hours, Make-JAI/Technic Euchner/Siemens/BCH ] |
| 5 | SMPS, Output-24VDC, Current-10A Power-240W,Ripple and Noise-80mVp-p, Voltage ad justment range-24 to 28 V, Hold up time-240ms/230VAC, Input:- 240VAC, Power factor- 0.96 AC, Curr ent-2.8A, Inrush current start-77A/115 VAC , Over voltage-30 to 36 V MTBF- 289.9 khrs ( min), Make -Meanwell/Siemens/ABB ] |
| 6 | Line Filter, Type -EP series Mounting chasis type, High Voltage test (60sec)-1.5KVAC, V oltage drop-1 Volts, Insulation resistance at 500VDC- 300MOhm, Rated Voltage -440V, rated Current- 30Amp, Output connection - Screw Lead through M4, Leakage Current 3x0.3mA, Make- Elcom/ABB / Minilec ] |
