|
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 metre and lead upto 30 Mtr. Including filling watering and ramming of excavated earth into the trenches of into the space between the building and the sides of foundation trenches or into the plinth and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the foundation trenches.DSR 2.6.1 |
| 2 | 1:4:8 (1 cement :4 coarse sand : 8 graded brick aggregate 40 mm nominal size.dsr 4.1.8 |
| 3 | Brick work with common burnt clay (Non Modular) Bricks of class-150 in foundation and plinth in: cement mortar 1:6 S.I NO 6.1.2 |
| 4 | Brick work with common burnt clay (Non Modular) Bricks of class-150 in Super structure above plinth level up to floor v level in all shape and sizes: cement mortar 1:4 DSR 6.4.1 |
| 5 | 12 mm plaster of mix 1:4 (coarse sand) PWD S.I NO13.1.1 |
| 6 | Finishing Walls with putty approved brand and manfacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material labour T&P etc.required for proper completion of work DSR 13.8 |
| 7 | Finishing wall with water proof cement paint of approved make and quality on new work with two coats to give an even shade including supply of all materials, labour, tools and plants etc. required for proper completion of the work.DSR 13.8 |
| 8 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). |
| 9 | Painting or varnishing new work in small areas or new wood work with one coat (upto one sq. mt.) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the DSR NO 13.62.1 |
| 10 | CHEQERRED TILES cement concret tiels 22 mm thick …………………..20mm bed thick cement motar 1:4 . Dsr 11.20.2 |
| 11 | GSB……………..COMPLET. |
| 12 | Providing & Fixing 18mm granite stone……complete item. 8.2.2.2 |
| 13 | 30mm red stone sun shed support red stone ………………….. Finising complet. Dsr no 7.30 |
| 14 | interlocking …………………… |
| 15 | Designing,fabricating,testing installing and fixing in position curtain wall with aluminium composite panel cladding, with grooves for linear as well as curvillinear portion of the builing for all heighs and level etc including as per dsr 8.32 |
| 16 | Supply and fixing of board … complete |
| 17 | Providing StainlessSteel Siting Bench. |
| 18 | Fixing of Bench after excavation of pit, using base concrete and R..C.C. for Fixing of Bench. |
| 19 | Providing / Fixing Brass name Plate Size 300 mm |
| 20 | Supply of 110 mm PVC Pipe(6 kg/cm2 ) ISI Mark etc all Comp. |
| 21 | Supply of 32 mm GI Pipe etc all Comp. |
| 22 | Boring Work With all Lab, T&P etc all Comp. |
| 23 | (A) 0 to 30 BGL |
| 24 | (B) L 30-60 |
| 25 | (C) L 60-90 |
| 26 | Lowering & Jointing of PVC Pipe with all Lab, T&P etc all Comp. |
| 27 | (A) 0 to 30 BGL |
| 28 | (B) 30 to 60 BGL |
| 29 | Lowering of Submersible Pump Set with Cable Jointing with Lab, T&P etc all Comp. 1 H.P |
| 30 | Supply of following Item for Proper Completion of work. |
| 31 | Supply of 1.00 H.P.KSB make oil filled single phase submersible motor pump set, discharge 20000 Ltr/h at the head of 45 meter etc including supply of suitable submersible cable & wire rope etc all complete |
| 32 | Cable 2 core (copper) |
| 33 | Cable 2 core (copper) |
| 34 | Clamp 4” GI |
| 35 | Clamp 32 mm GI |
| 36 | Solution |
| 37 | Screw |
| 38 | Bush 32 mmx40mm |
| 39 | Socket |
| 40 | Nipple 12mmx 32 mm |
| 41 | Boring cap |
| 42 | Gate valve |
| 43 | Nut bolt |
| 44 | Elbow 32 mmmx25mm |
| 45 | Nipple 150 mm x 25mm |
| 46 | (P) Supply & Fixing of starter with board etc all complete as directed by sie i/c 1 H.P |
| 47 | Supply of GI pipe for fitting of water tank T&P due to water supply |
| 48 | (A) GI Pipe 32mm |
| 49 | (B) GI pipe 25mm |
| 50 | (C) GI pipe 15mm |
| 51 | Supply & fitting of Bib cock mark etc all comp. Please Enable Macros to View BoQ information |
