|
| 1 | 16mm MS Bolt & Nuts with Washer |
| 2 | 25X6 mm GI Flat for earthing |
| 3 | 50x6 mm GI Flat for earthing |
| 4 | 40 mm nominal bore GI Pipe (Medium gauge |
| 5 | HDPE Pipe 8'', 10Mtr. (Spec PE80-PN8, 1 |
| 6 | 3C X 300 mm2 33KV XLPE Cable (armoured) A |
| 7 | 3C X 400 mm2 33KV XLPE Cable (armoured) A |
| 8 | Heat shrinkable jointing kit for 3Cx400 |
| 9 | Heat shrinkable jointing kit for 3Cx400 |
| 10 | Heat shrinkable jointing kit for 3Cx300 |
| 11 | Heat shrinkable jointing kit for 3Cx300 |
| 12 | SITC of RMU 33KV 4Way 630A(2LSO+2CB) motorised LBS and VCB With AUX PT as per TPNODL Specification. Make: ABB/Siemens/Schneider |
| 13 | Cubicle room for 33KV |
| 14 | Excavation Cable Trench |
| 15 | Construction of RMU foundation O/D |
| 16 | Lay-33KV CbI(70-630 sqmm)-Trench/Pipe |
| 17 | Construction of Earthing chamber including |
| 18 | WPB (GI) Pole 160x152 (13Mtr. Long 30.4 |
| 19 | PG Clamp for 100Sq.mm AAA Conductor |
| 20 | HW fitting (B&S) 90KN,4Bolt |
| 21 | Disc Insulator (B&S) 90KN polymer |
| 22 | Lightning Arrester(30KV,10KA)(Station C |
| 23 | 33KV 1250 AMP Double break (Turn & Twis |
| 24 | Earthing of support (Coil Type) |
| 25 | HT Stay set complete |
| 26 | HT Stay Insulator type-C (2nos) |
| 27 | HT Stay Clamp 50x8 mm flat 3.14Kg/M |
| 28 | 7/8 SWG Stay wire 15Kg/Stay |
| 29 | GI Pipe earthing 40mm 3Mtr. Long |
| 30 | 50x6mm GI Flat for earthing 2.36Kg/Mtr. |
| 31 | Top Channel 100x50x6mm 9.56 Kg/Mtr. |
| 32 | Fish Plate 50x6mm2.36 Kg/Mtr. |
| 33 | Double Pole Belting Channel 75x40x4.8mm |
| 34 | 50x50x6mm GI Bracing Angle 4.5Kg/Mtr. |
| 35 | Danger Plate, 2 nos. |
| 36 | Back Clamp for danger Plate 25x3mm fla |
| 37 | GI barbed wire anticlimbing device 3Kg. |
| 38 | Back Clamp for anticlimbing device 3Kg. |
| 39 | GI Nut, Bolt & Washer of different size |
| 40 | Black Paint |
| 41 | Yellow Colour Paint for Background |
| 42 | Fixing of 33KV line complete stay set includes |
| 43 | Concreting Ratio 1:1.5:3 (500mmx500mmx22) |
| 44 | Concreting Ratio 1:1.5:3 with dimension |
| 45 | Construction of Earthing chamber including |
| 46 | SITC of 750 kVA 33/0.433kv,Dyn11,ONAN, BIS level II, Copper wound Transformer having provision of OLTC,RTCC panel ,OTI,WTI, as per approved GA drawing, 4 nos. 600mmX600mmX3.18mm copper plate earthing, LT extension cu busbar with flexible braided copper link alongwith LT extension compartment of 1250A for connection of 5 run 3.5CX 300 Sqmm al armoured xlpe cable and required accessories as per IS 1180 standard in complete as per the direction of engineer incharge.Make: Kirloskar/Schneider/Crompton Greaves/Alfa |
| 47 | 33KV Outdoor VCB-1600A with outdoor CR panel without PT,With outdoor CT-600-300-150/1-1A, 15VA,STC 25KA/3 Sec, Class:0.5,5P10 AS PER TPNODL SPECIFICATION Make: ABB/Siemens/Schneider |
| 48 | Lightening Arrester (30KV, 10KA) StationClass |
| 49 | 33 KV Isolator with earth Switch (1250 A) |
| 50 | 33 KV 1250 AMP Double break (Turn & twist center rotating) isolator without earth switch with PI(Polymer) |
| 51 | 33KV PT Single Phase oil cooled PT(33 KV/√3/110V/√3) Class0.5 with O/P burden of 100VA AS PER TPNODL SPECIFICATION (MAKE: ABB, SIEMENS, SCHNEIDER) |
| 52 | 13 mtr RS Joist Pole 150X150 34.6 Kg/m (Receiving DP,6pole structure) |
| 53 | 232sqmm AAA Conductor |
| 54 | PG Clamp for 232 Sqmm AAAC |
| 55 | H.T.Stay set complete |
| 56 | HT Stay Insulator Type-C |
| 57 | HT Stay Clamp, 50X8mm flat |
| 58 | 7/8 SWG GI wire for stay 15Kg per stay |
| 59 | Post Insulator,Polymer(33KV) |
| 60 | 33KV Disc Insulator (B & S), Polymer 120KN |
| 61 | 33KV H/W Fitting (B & S type) 120KN , 4Bolt for Disc Insulator |
| 62 | Top Channel 100x50x6mm,9.6Kg/meter |
| 63 | Bracing Channel 75x40x4.8mm,7.14Kg/mtr |
| 64 | Bracing Angle 50x50x6mm,4.5Kg./Mtr |
| 65 | Fish Plate(GI) 50x6mm,2.36Kg/mtr |
| 66 | GI Flat 50x6mm for earthing,2.36Kg/mtr |
| 67 | GI Nuts Bolt & Washer |
| 68 | Danger Plate |
| 69 | Fabrication & Galvanisation |
| 70 | Aluminium Socket 300 sqmm |
| 71 | 40mm nominal bore GI Pipe earthing device |
| 72 | 3CX300 sqmm 33KV XLPE Cable(Armoured) |
| 73 | Heat Shrinkable Jointing kit for 3CX300 sqmm(indoor type) |
| 74 | Heat Shrinkable Jointing kit for 3CX300 sqmm(Outdoor type) |
| 75 | HDPE Pipe, 8\\",10 Mtr (Spec PE80-PN8,200MM dia) |
| 76 | S/F of 1250 A outdoor cubical panel board double door both on front and back side made of 2mm C.R sheet with hot dip galvanised with provision of following items with fabrication erection testing & comissioning of total enclosed panel board , 1600A al busbar for termination of 5 run 3.5CX 300 Sqmm al armoured xlpe cable, 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing etc, complete with supply & fixing of following switch gears, 01 number 4p 1250A EDO TYPE ACB with 1. Micro Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.) (Make-Schneider(Masterpact NW) / ABB (E max2)/ Siemens (3WT) /Legrand (DMX3) , 3P+N Type 1+2 65KA SPD with 125A, 4P TMR MCCB, 25kA, Ics=100%Icu Digital Meter,RYB INDICATOR ,ON,OFF,TRIP INDICATOR FOR INCOMER AND OUTGOING FEEDER and main ,earthing connector ,stand with foundation in complete as per the direction of engineer incharge. Make of MCCB- LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULA Make of SPD- LEGRAND/ Siemens/ Schneider/ABB/OBO/DEHN |
| 77 | 2.5sqmm 10core Cu control cable |
| 78 | 2.5sqmm 4core control cable |
| 79 | Concreting ratio 1:1.5:3(M-20 Grade (500mmX500mmX2200mm) = 0.55Cu.mtr(Per Pole) |
| 80 | Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole) |
| 81 | Concrete materials for stay anchor plate. |
| 82 | Padding and concreting materials for support |
| 83 | Construction of Earth Pit chamber for Pipe earthing |
| 84 | Foundation of VCB with CT,PT,isolator for 33KV |
| 85 | Excavation of cable trench length by providing all necessary tool, manpower, pump etc, suitable for HT & LT cable laying . |
| 86 | Supplying and spreading, filling other works with fine sand under floors, ground etc. as per EIC instruction. Scope of work also includes watering, ramming, consolidating and dressing complete and other works if required at site. |
| 87 | Supply, laying and fixing of 1st class fly ash bricks for any type of works (cable laying etc. Note: rate will be per brick. |
| 88 | Backfilling with same earth BA will Back fill the cable excavation site with same earth.BA will provide necessary Tools, Machinery & Manpower for the activity. |
| 89 | Cable Route Marker along the cable route at an interval of 30mtrs with civil works |
| 90 | Plinth for transformer |
| 91 | MS Gate for Substation |
| 92 | Cable Trench (1 mtr X 1 Mtr )at sub station area |
| 93 | Sub station Levelling, Fencing, Metal spreading |
| 94 | Fire Bucket with stand(4nos. In each) Please Enable Macros to View BoQ information |
