Tender For Construction Of Devbhoomi Rajat Jayanti Park, Pithoragarh-Uttarakhand

TDR : 56098580

Tender Notice
BOQ

20 Days Left

Pithoragarh , Uttarakhand

Tender Brief : Tender For Construction Of Devbhoomi Rajat Jayanti Park

Document Fees
₹ 5900 /-

EMD
₹ 1724000.0 /-

Tender Value
₹ 8.61 Crore /-

Submission Date
13-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation in foundation for retaining & breast walls in all types of soils and rocks including lead, lift and disposal of surplus material as per direction of engineer - in - charge
2	Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work.(Based on PWD specifications)
3	By Mix in Place MethodConstruction of granular sub-base by providing wellgraded material, spreading inuniform layers with motor grader on prepared surface, mixing by mix in place methodwith rotavator at OMC, and compacting with smooth wheel roller to achieve thedesired density, complete as per Technical Specification Clause 401 For Grading III Material
4	Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc.
5	Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 R.C.C M 25
6	Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 120
7	Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadamspeci fication including premixing the material with water at OMC in mechanical mixer (PugMill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance ofdiversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.(By Mechanical Means with 1 km lead)
8	Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the fullwidth of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
9	Providing and Laying of Interlocking Concrete Block (M-35) Pavements havingthickness 80 mm as per drawings and Technical Specification Clause 1504.
10	Excavation in Hilly Areas in Soil by manual means. Excavation in soil in Hilly Area by manual means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per drawing and Technical Specification Clause 1603.1
11	WBM Grading 1 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 404. By Mechanical Means
12	Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls,etc. including supply of all material, labour, T&P and royaltiies etc.complete as per drawing and technical specifications Clauses 702, 704,1202 & 1203 of MORD Specifiction
13	Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (For height upto 5 m) P.C.C. grade M 20 Nominal mix (1:2:4)
14	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
15	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
16	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
17	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified mininum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M25 grade with minimum cementcontent of 330 kg /cum
18	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified mininum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V levelConcrete of M25 grade with minimum cement content of 330 kg /cum
19	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars
20	Centring and shuttering including strutting,ropping etc. and removal of form for
21	Foundations, footings, bases of columns, etc. for mass concrete
22	Centring and Shuttering for Suspended floors, roofs, landings, balconies and access platform.
23	Lintels, beams, plinth beams, girders, bressumers and cantilevers.
24	Columns, Pillars, Piers, Abutments, Posts andStruts.
25	Shelves (cast in situ)
26	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
27	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
28	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
29	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).
30	Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level Cement mortar 1:4 (1 cement : 4 coarse sand)
31	Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).
32	Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
33	Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm
34	Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete.300x16 mm
35	Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete.250x10 mm
36	Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper
37	Providing and fixing fly proof galvanised M.S wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. With 12 mm mild steel U beading.
38	Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, Npressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Profile B
39	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
40	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
41	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
42	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube
43	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
44	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 m
45	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
46	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
47	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
48	Brick work with F.P.S. bricks of class designation 75 in superstructure Cement mortar 1:6 (1 cement : 6 coarse sand)
49	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.
50	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
51	6 mm cement plaster 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. Slabs and beams.
52	12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
53	15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
54	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (New work (two or more coats) over and including priming coat with cement primer)
55	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
56	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
57	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
58	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
59	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
60	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm
61	Bend 87.5 degree 110 mm bend
62	Shoe (Plain)110 mm Shoe
63	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including 110 mm
64	Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
65	Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern
66	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste,pvc connection pipe of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
67	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required : 510x1040 mm bowl depth 250 mm
68	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. Flexible pipe 40 mm dia
69	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
70	Providing and fixing CP Brass 32mm size approved quality & make and as per the direction of Engineer-in-charge.
71	Providing and fixing C.P urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms
72	Providing and laying fixing soil, waste and vent pipes : 100 mm dia PVC/Sand cast iron S&S pipe as per IS: 1729 inclduing all fitting & fixture i.e. bend, tee, collar, etc and sufface finished as per drawing & specification and direction by engineer in charge.
73	Providing and fixing plain bend of required degree. 100 mm Sand cast iron S&S as per IS - 1729
74	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shades with 6 mm thick hard board backing: Rectangular shape 1500x450 mm
75	Providing and fixing toilet paper holder : C.P. brass
76	Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms
77	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore
78	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
79	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
80	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
81	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cementconcrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 100 to 250 mm diameter
82	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of onlysteel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6)
83	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of onlysteel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6)
84	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of onlysteel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6)
85	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).
86	Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed by dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth
87	Providing and laying in position ready mixed M- 25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
88	Providing and laying in position ready mixed M- 25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level
89	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
90	12 mm thick cement plaster in 1:6 ( 1 cement and 6 fine sand) mortar including supply of all material , labour and T&P etc. required for proper completion of the work.
91	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
92	Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime
93	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture
94	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).
95	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
96	Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime
97	Providing and fixing Glass mossaic tiles on finished plain wall surfaceof size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customizedesign as per direction of Engineer-in- Charge. The glass mosaic tiles tobe fixed on the wall surface with the help of approved adhesive applied atthe rate of 2.5 kg per sqm and grouting of the same. The rate is inclusiveof all operation, material and required pattern approved by Engineer-in-Charge:
98	Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel:1 :2:4 (1 cement : 2 coarse sand (zone-Ill) derived fromnatural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources)
99	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
100	Finishing walls with Acrylic Smooth exterior paint of required shadeNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sqm)
101	Disposal of Earth
102	Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
103	Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted withspecial shaped washers etc. complete. Hot finished welded type tubes
104	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing o edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm
105	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 1 2 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
106	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
107	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
108	For vertical surface two coats @ 0.70 kg per sqm
109	For horizontal surface one coat @1.10 kg per sqm.
110	Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete.
111	12 mm thick cement plaster in 1:4 (1 cement and 4 fine sand) mortar including supply of all material , labour and T&P etc. required for proper completion of the work.
112	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
113	All types of soil : 350 mm dia
114	Rocky strata including Boulders: 350 mm dia
115	Supplying, filling, spreading & leveling stone boulders of size range ]5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
116	Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
117	Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia
118	Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations@ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge.
119	Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge.
120	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe
121	Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
122	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D.Rectangular shape 600x450 mm internal dimensions
123	Half brick circular tree guard in bricks, internal diameter 1.25 metre andheight 1.2 metre above ground and 0.20 m below ground, bottom two courseslaid dry and top three courses in cement mortar 1:6 (1 cement : 6 finesand) and the intermediate courses being in dry honey comb masonry asper design complete: With common burnt clay F.P.S. (non modular) bricks of classdesignation 5.0
124	Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to6 suckers 1.80 m to 2.10m ht umbrella type well developed in 50 cmCement Pot as per direction of the officer-in-charge.
125	Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed12 and above good color fresh and healthy leaves in 40 cm Cement Pot asper direction of the officer-in-charge.
126	Providing and Displaying Antirrhinum Hybrid dwarf variety, specimen (8-10)with fresh & healthy foliage in full bloom well developed in 35 cm EarthenTray/Challi Pot and as per direction of the officer-in-charge.
127	Providing and Displaying Marigold jaffri French orange/yellow/Russet colourwell developed with fresh & healthy foliage with 60 to 75 flowers in bloomspecimen plant 60 to 75 cm ht in 30 cm Earthen Pot/Plastic Pot and asper direction of the officer-in-charge
128	Providing and Displaying Ficus Long Island topiary well developed withfresh & healthy 5 to 6 ball specific size and shape 120 to 150 cm ht in40 cm Cement Pot as per direction of the officer-in-charge.
129	Providing and Displaying Ficus Nuda topiary well developed with fresh &healthy 5 to 6 big ball specific size and shape 180to 210cm ht in 40 cmCement Pot as per direction of the officer-in-charge.
130	Providing and Displaying Ficus Retusa topiary well developed with fresh &healthy 5 to 6 big ball specific size and shape 180 to 210cm ht in 40 cmCement Pot as per direction of the officer-in-charge
131	Providing and Displaying Foxtail palm well developed with fresh & healthyfoliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of theofficer-in-charge.
132	Providing and Displaying Mascarena palm well developed with fresh &healthy foliage leaves 150 to 180 cm ht in 35 cm Cement Pot as perdirection of the officer-in-charge.
133	Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mmthickness of existing ground prepared with proper level and ramming withtools wooden (Dhurmos) and than rolling the surface with light roller makethe surface smoothen and light waterning with sprinkler and maintenancefor 30 days or more till the grass establish properly, as per direction ofofficer-in-charge.
134	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
135	Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including
136	Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick
137	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. - For External Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
138	25 mm dia nominal bore
139	40 mm dia nominal bore
140	25 mm nominal bore
141	40 mm nominal bore
142	Providing and fixing gun metal non- return valve of approved quality (screwed end) :40 mm nominal bore (Horizontal)
143	Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick
144	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
145	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required Group C
146	Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed medium.class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required
147	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
148	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
149	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
150	4 X 10 sq. mm + 2 X 6 sq. mm earth wire
151	Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.180 mm X 100 mm X 60 mm deep
152	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
153	5/6 amps switch
154	3 pin 5/6 amps Socket
155	Supplying and flxing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
156	Supplying and flxing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and flxing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc. as required.
157	Supplying and flxing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and flxing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, con.nection, painting etc. as required.
158	Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/ wooden block including connection etc. as required.
159	Supplying and flxing brass batten/angle holder including connection etc. as required.
160	Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
161	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
162	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable,including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
163	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10cm and 5 cm or less shall be ignored).
164	Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, nterconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator 6 way (4 + 18), Double door
165	Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'c' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
166	Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 Amp
167	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
168	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
169	Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
170	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
171	Earthing with copper earth plate 600mm x600mm x3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc., ( with charcoal or coke and salt) complete as required.
172	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm
173	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
174	Providing and fixing 6 SWG dia G.I. wire on surface or in recessfor loop earthing as required.
175	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
176	Upto 35 sq. mm
177	Above 35 sq. mm and upto 95 sq. mm
178	Above 95 sq. mm and upto 185 sq. mm
179	Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
180	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
181	2 X 6 sq. mm (19mm)
182	4 X 10 sq. mm (25mm)
183	4 X 16 sq. mm (28mm)
184	3½ X 25 sq. mm (28mm)
185	3½ X 70 sq. mm (38mm)
186	3½ X 120 sq. mm (45mm)
187	Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.40 mm dia
188	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
189	63 mm dia (OD-63 mm & ID-51 mm nominal)
190	90 mm dia (OD-90 mm & ID-76 mm nominal)
191	120 mm dia (OD-120 mm & ID-103 mm nominal)
192	160 mm dia (OD-160 mm & ID-135 mm nominal)
193	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
194	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
195	Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm
196	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
197	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required Upto 120 sq. mm
198	supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.70 sq. mm
199	Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 70 sq. mm
200	Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc.as required.Above 8.0 metre and upto 10.0 metre
201	Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.
202	Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
203	Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.
204	Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement,G.I. bolts, nuts, washers etc. as required.
205	6 Inch. Ball, Make in Brass Chrome plated Complete HoldingAssembly with Fitting. (CNC Cutting)Make–DPS
206	Stick for ball with coupling Complete Assembling withaccessories and Fitting. (CNC Cutting)Make-DPS
207	Dandelion Shape Fountain Nozzle Make in Brass withStainless Steel Chrome plated Complete Holding Assembly withFitting. (CNC Cutting)
208	6FeetGIHeaderforDandelionFountainmakeinJindalbclassAssembled with Fittings
209	Supply and Installation of Foam Jet Nozzle with Header averageHeight2to5Feet.WithCompleterequiredMaterials.Nozzle Specification: - Bronze, Gunmetal, Brass Fine qualitymateriel Shine chrome made on new technology CNC Cutting.Make: -DPS
210	SupplyofwaterproofhighpowerLEDlights6x3watts=18watt RGB/Multi colour made out of ABS Body . Manufactured by an ISO 9001 : 2015 Certified Company Make:-DPS(powered By Edison/Panasonic)
211	Supply of DCC Master Control Device for LED Lightshaving Specifications:-*Pre-Programmed Colour patterns and Load Circuit-InbuiltPower- 12V DC,Make–DPS
212	Supplying of Three Phase Open well submersible Pump Settotally enclosed water filled squirrel cage induction motorwater lubricated with oil seals with sleeves and thrust bearinghaving all rotating parts dynamically balanced for silentoperation Suitable for three phase 50 HZ AC supply as perdirection, instruction and entire satisfaction of Engineer-incharge.Motor Body: CI Pump Body: CIMake: Kirloskar/Crompton or equivalentCapacity : 7.5 HPThree Phase Head 10 MtrSuction&Delivery85x85mm
213	Supply, Installation, Testing Commissioning of Round 8.5 FeetDIA Ring make in Jindal B Class grade Complete Holder assemblywith Rubber coated paint. Manufactured by Digital PowerSystems. With Below Specifications. Pool Size : 10ft Round DiaRing Water Effect height approx 1 - 2 Mtr. Process: - Ball Valveoperated main Header make in Jindal B Class 1.5\\" Inch size Pipewith complete fittings. Inlet Socket and flanges connection l bowbush, reducer, socket, nipple, ball valve, and union, withconnection pipe 1-1/4 inch. 1\\"Ball Joint assembly with fittings.Make-DPS
214	Supply, Installation, Testing Commissioning of Round 6 Feet DIARing make in Jindal B Class grade Complete Holder assemblywith Rubber coated paint. Manufactured by Digital PowerSystems. With Below Specifications. Pool Size : 10ft Round DiaRing Water Effect height approx 1 - 2 Mtr. Process: - Ball Valveoperated main Header make in Jindal B Class 1.5\\" Inch size Pipewith complete fittings. Inlet Socket and flanges connection l bowbush, reducer, socket, nipple, ball valve, and union, withconnection pipe 1-1/4 inch. 1\\"Ball Joint assembly with fittings.Make-DPS
215	Supply of outdoor type control panel suitable for fountain equipment including wiring, cabling, cable tray control wiring and earthing from control panel to motor, starters etc. The control panel shall be compartmentalize for individual outgoing and shall be made out of 16 SWG CRC sheet in grey color andshall be floor mounted with following. All fittings to be done as per direction of Company. Rating :- IP-65/66 / ROHS/CE Brand Used Like: L&T/Havells/SchneiderAssembled By : DPS
216	Supplying of PVC/UPVC pipes (10 Kg/cm2) of make Prince/Supreme /Prakash or equivalent confirming to ISO 4985:2000 including all UPVC fitting / jointing with goodQuality solvent of following sizes. All fixing to be done to theEntire as high pressure
217	Supplying of submersible flat/round cables PVC insulated PVCsheathed copper conductor of make Finolex/National/Kalingacomplete as per the direction & entire satisfaction of Engineeringcharge. (A) Threecoreflattype2.5 Square mm.(B) FourCore2.5squaremm
218	Installation/Testing/Supervision/Commissioning/Labour Manpower
219	Transportation
220	Supply and Installation of Foam Jet Nozzle with Header average Height 2 to 5 Feet . With Complete required Materials.Nozzle Specification: - Bronze, Gunmetal, Brass Fine quality materiel Shine
221	Supply of water proof high power LED lights 6x3 watts=18watt RGB/Multicolor made out of ABS Body. Manufactured by an ISO 9001 : 2015 Certified CompanyMake :- DPS (powered By dison/ Panasonic)
222	Supply of DCC Master Control Device for LED Lights having Specifications:-* Pre-Programmed Colour patterns and Load Circuit-Inbuilt Power- 12V DC,Make – DPS
223	Supplying of Three Phase Open well submersible Pump Set totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CIMake : Kirloskar/Crompton or equivalentCapacity : 7.5 HP Three Phase Head 10 Mtr Suction & Delivery 85x85mm
224	.Supply of outdoor type control panelequipment including wiring, cabling, cable tray control and earthing from control panel to control panel shall be compartmentalize for individual outgoing and shall be made out of 16 SWG CRC sheet in grey color and shall be floor mounted with following. All fittings to be done a per direction of Company. Rating :Brand Used Like : L&T/Havells /Schneider Assembled By : DPS
225	Supplying of PVC/UPVC pipes (10 Kg/cm2) of Prince/Supreme/Prakash or equivalent confirming to4985:2000 including all UPVC fitting Quality solvent of following sizes. All fixing to be done to theentire as high pressure
226	Supplying of submersible flat/round cables PVC sheathed copper conductor of make complete as per the direction & entire charge. (A) Three core flat type 2.5 Square (B) Four Core 2.5 square mm.
227	Installation /Testing /Supervision /Commissioning/Labour Manpower
228	Transportation
229	Supply and fixing of LED lamp 9 w , 230/250 Volts, 50 Hz etc. complete . required.
230	Supply of Ceiling fan 1200mm sweep, 240V, as approved by Engineer in charge complete in all respect.
231	Supply of LED Mirror light with 10 watt. LED complete in all respects.
232	Supply of LED Tube light with batten suitable for up to 1x20 watt. LED tube light complete including tube etc on surface complete in all respects.
233	Supply and fixing of Surface mounting 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect
234	Supply of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts Complete as required.
235	6 sq. mm 2 core
236	10 sq. mm 4 core
237	16 sq.mm 4 core
238	25 sqmm 3.5 core
239	70 sqmm 3.5 core
240	120 sqmm 3.5 core
241	Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN
242	Supply and fixing of decorative 10 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect.
243	Supply of decorative hot dipped galvanised mild steel step pole 4 Mtr long with grey powder finish.Compatible for all post top range. Window - Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole.
244	Grouting and fixing of G.I. /M.S. pole completely with all labour, material required as cement, sand, concerete etc.
245	Supply & Fixing of LED Top Post fitting having die cast aluminium body and diffuser with driver set suitable 45 Watt confirming to IP 66 protection complete in all respects.
246	Supply & Fixing of LED Gate light fitting having die cast aluminium body and diffuser with driver set suitable 45 Watt confirming to IP 66 protection complete in all respects.
247	Supply and fixing of 3 Watt LED Path / Walkover luminaire having powder cotated die cast aluminium body with drive set . Confirming to IP 65 Protection complete in all respect.
248	Supply & Fixing of 50W LED Flood Lights Specification of 50W LED Flood light 50W ±5%, Input Voltage AC 140 to 270 V AC with Auto resetting Safety Cut-off, Power Factor>0.95, Driver Efficiency>85%, Driver should also have 5Kv Inbuilt and 10Kv External Surge Protection, Double phase protection , Total Harmonic distortion THD (I)≤10% Humidity 10% to 90% RH Working Temp-10C to +50C,LM79 from NABL lab, System Efficacy 100Lm/Watt.
249	Supply of Hot dip Galvanized mast of mean height of 16 m suitable for mounting 8 Light fittings symmetrically. Top OAF-150 mm, Bottom OAF-360 mm, Thickness-3/4 mm. Base plate-560x25 mm mm. Accessories supplied will include heardframe, lantern carraige with 8 Luminaire arms suitable for mounting 8nos. of 250 W LED luminaires symmetrically, SGDD winch with 6 mm wire ropes 2350 BL capacity ( 3 w rope system), lightning arrestor, Junction box, trailing cable 5c x2.5 sq mm cable-1 nos., carraige supports
250	Foundation accessories consisting of 8 no. of M30x850 mm foundation bolts, nuts, 1 no. anchor plate and 50% template.
251	Supply of High Mast control panel as per SRL std-1. Control Panel with 40 A MCB as incomer along with 32 A contactor and timer for auto switching ON/OFF of Luminiares. Also there is a facility to operate the power tool for raising and lowering of lantern carraige.
252	Supply of LED type aviation obstruction Light, Double Dome type.
253	Supply of 250W LED Flood Lights Specification of 250W LED Flood light 250W ±5%, Input Voltage AC 140 to 270 V AC with Auto resetting Safety Cut-off, Power Factor>0.95, Driver Efficiency>85%, Driver should also have 5Kv Inbuilt and 10Kv External Surge Protection, Double phase protection , Total Harmonic distortion THD (I)≤10% Humidity 10% to 90% RH Working Temp-10C to +50C,LM79 from NABL lab, System Efficacy 100Lm/Watt.
254	Erection, Testing & commissioning of High mast with the help of suitable tool & plant with all wiring material with PVC Insulated, PVC Sheathed flexible cable for suitable copper conductor 3 cores of 1.5Sq mm lugs MCB in base compartment and labor & 4 core 2.5 Sq. mm Cu Armored cable for motor supply from feeder pillar panel to the base compartment of the high mast and 6Coe 4 Sq. mm Cu Armored cable from base compartment to top of the mast system Junction Box.
255	Supply and erection of factory fabricated and wired metal clad dust and vermin proof Cubical panel ACB/MCCB complete with the MCB and instument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprose of Digital type ammeter, voltmeter, selector switches for ammeter and voltmeter, instrument fuses, current transformer etc. The board shall have suitable capacity electroytic aluminium bushbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes. reverse entry boxes in case of pedestal type, cable sockets, compression glands and indicating lamp on incoming etc.The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6/2 mm cubicle type.Incoming- (( 200 Amp MCCB- 1 No.,4p,36KA, Outgoing- 100 Amp MCCB-1 No.,4p, 36 KA, 63 A MCCB -8 No,4p, 25 KA, 63 A MCB FP-2 No., 40 A MCB DP-3 No.,Changeover Switch 200 Amp-1 No.))
256	Transportation of heavy duty dual Rotary Rig machine, compressor, OP unit & accessories, T&P and up to site of work and back transportation after complete of work.
257	Installation of ring machine, compressor & dismantling including leveling and dressing of site.
258	Drilling of 500/450/400/350/300 mm dia bore from G.I to 200mtr. BGL including reaming and back washing in hard bolder. Starata.
259	Lowering of tubewell assemble pipe of size 200 mm. dia M.S.Plain/slotted from G.I to 200 mtr. BGL with shrouding of pea Gravel in annular space between bore & assembly pipe.
260	200mm dia 7.9 mm thick M.S.E.R.W. plant pipe with ring.
261	200mm dia 7.9 mm thick M.S.E.R.W. slotted pipe (slot size as per site. Tubewell requirement with ring
262	200 mm dia heavy duty M.S. well. Clamp.
263	200mm dia M.S. well. Clamp.
264	M.S. Girder of 8”×4” size frame (about 4 k in length)
265	200 mm dia bail plug (heavy duty)
266	Errection of compressor
267	Development of tubewell by air compressor
268	Dismantling of above.
269	Installation of O.P. unit including leveling of site & equipment etc. errwction of O.P. unit.
270	Development of tubewell by O.P. unit.
271	Dismantling of above.
272	Chemical and Bacteriological test of water.
273	Hydrological/Geological Survey of SITC
274	Supply of submersible pump set KSB Make 250 lpm, 165 mtr. Head.
275	Starter cum Control Panel L&T Make for 20 HP.
276	Supply of 75 mm dia ERW casing coloum pipe with suitable size thick with flange 3mtr long.
277	Main Switch for TW.
278	Supply of 75mm dia DF 1.5 mtr.
279	Supply of 75 mm dia ISI, 1.6 Rating Reflex valve.
280	Supply of 75 mm dia ISI, 1.6 Rating gate valve.
281	Supply 75mm dia CI Tee.
282	Supply 75mm dia CI bend
283	Supply of Heavy Reducer.
284	Supply of Nut Bolt.
285	Supply of Rubber Packing of Flench
286	Supply of 10 sq.mm Submersible cable.
287	Earthing of T/w. Complete in all aspect.
288	Installation, Testing, Commissioing of Pumping Plant.
289	Running Maitainenace of Tubewell for 06 Months.
290	S/O Control Panel with C.B one Incoming (32 A.M.C.C.B) and 2 Outgoing (16 A.M.C.B each)
291	Power Wiring and Earthing complete.
292	S/f 50mm dia Main Piping and valves. (50mm dia C.I.D/F Sluice valve 4-2 Nos, 50mm dia C.S Gate Valve-2 Nos.,50mm dia C.S Gate Valve-2 Nos.50 mm dia C.S, S.C Gate Valve-2 Nos.,40x50mm reducing bend-2 Nos.,50 mm dia M.s D/F Pipe- 2 Nos.,32x50 mm dia M.s D/F Tea-2 Nos.,50 mm dia M.s .D/F Tea-2 Nos.,50 mm dia M.s .D/F Pipe-2 Nos.,M.s Bolt Nut and Washer-2 Nos.)
293	Supply of HT XLPE PVC aluminium armoured cable 50 sq.mm 3 core 11KV. Complete
294	Supply installation, commissioning and testing of transformer copper wound step down 100 KVA out door type 11/0.433 KV at no load 3 phase, 4 wire 50 HZ, AC with oil immersed naturally cooled, delta connected on HV side and star connected in LV side in accordance with vector symbal DY-II with neutral brought out on secondary side and having tapping in step of ± 2 ½ %, ± 5% and ± 7 ½ % to be changed by mean of hand operated over load tap changing gear including first fill of transformer oil as per IS-335, and including all fittings/accessories as specified in technical specification and IS-2026, the transformer should be fixed on plinth with cable box/LT bushing on LT side and brass cable gland HV bushings on HT side, oil temprature gauge 96mm dia dial type dehydrating breather with first fill of dehydrating agent, oil conservator explosion vent, rating and terminal marking plate, oil level gauge, oil drain and filter valve, extra bushing to restore out side cable box for providing independent earthings and neutral fittings, lugs and two earthing terminal and all other standard accessories all as specified and directed by Engineer-in-Charge.
295	Material and labour for transformer foundation of size 1.8x1.8x0.90m, brick masonry work in 1:6 with PCC 1:4:8 in top of plateform including feeling of boulder brick bats with barbed wire fencing work with angle iron size of 35x35x5mm all as directed by Engineer-in-charge.
296	Supply of 8.5 m long Tubulor pole SP-23 with top cover plate …complete in all respect
297	Supply & Installation of switch air break gang operated HT 11 KV triple pole with 12 insulator 200 amp rating with drop out fuse assembly with fuse carrier ,fuse element mounted on insulator and steel frame mechanically oprated mechanism consisting of operating rod of 25mm bore grade GI pipe of suitable length worked from ground level and with locking arrangement flat iron clamp 50mmx6mm including MS channel of suitable size and length for fixingGO/DO including bolts, nuts, and washers complete
298	Painting of electric poles with 2 coats of aluminium paints over red oxide primer complete in all respects.
299	SITC of M.S Benches made out of cast iron legs and arms with intermediate tubes for seating and backrest , doing painted , Length-1500, weight 70 kg. - FOR BENCHES
300	Fabrication and Installation of Selfie Kiosk 2400 mm height x 1500mm width x 300mm thickness made in ACP with MS Framework and supporting base plate and fastners complete with approved ACP Texture and MS Paint Finish as per the engineer -in-site ( refer to Design presentation for Final Design )
301	SITC of Main gate 3D letter Signage in Hindi “ रजत जयंती पार्क” 16 inch in height fixed with a base plate at bottom.
302	Supply and Installation of Directional Signage ( 4ft x 2ft ) made in 4mm ACP shet and UV printed Vinyl pasted on it. The signage shall be fixed to a SHS 100 X 100 pipe post 4000mm in height complete fixed to ground with PCC Pit 300mm x 300mm x 600mm as per the directions of engineer -in-site ( refer to Design presentation for Final Design )
303	Kids play station (Multi Play fun system Special, Spring Rider Horse, Spring Rider Bike, Spring RiderElephant, Platform merry Go Round, Double arc swing with Character, Nexlev Pinnacle crestro)
304	EPDM Flooring running track25mm (19mmbase + 6 mm EPDM)
305	Arch Framwork with Planer Fram in MS
306	Art Work Sculpture In Ms
307	Elepthant Topiary Frame in Ms
308	Bear Topiary Frame in Ms
309	Deer Topairy Frme in Ms
310	Tiger Topairy Frame in Ms
311	Two laser 5K Lumen Projector with mount , 1920 x 1200 ( WUXGA ) Display color 30 bits ( 1.07 billion colors) for 140 degree projection content with vfx motion graphics, projection bending software, archival data and sound design including voice over for 15 minutes duration with High end PC ( Electrobot gaming Tower PC- Intel 10th gen i7 10700F, RTX 3060 6GB, 16GB RAM, 1TB HDD, 256GB SSD with 4 ARGB Cooling fans. Full Range speaker 800 W – Speaker, Amplifier, Windows Licence plus keyboard mouse including HDMI wires and Cables.
312	Voltas srorage type water cooler 15 LPH Cooling capacity
313	NAV RO plant with Genset & trolley warranty 1 year nav
314	Jaguar kohler sensor taps wall mounted
315	Custom metal Brass Artifact to cover tao for naula
316	F.R.P ARCHES 1800 MM X 900MM FOR GAZEBO IN TRADITIONAL ARCHITECTURAL STYLE, (Stone Coated metal roof tile, flashing 6x5, Ridge 6x5)
317	STONE COATED METAL ROOF TILE (Stone Coated metal roof tile, flashing 6x5, Ridge 6x5) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttarakhand Tenders

Services Tenders

Space Planning and Designing Tenders

Gardening Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Devbhoomi Rajat Jayanti Park, Pithoragarh-Uttarakhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Devbhoomi Rajat Jayanti Park, Pithoragarh-Uttarakhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us