|
| 1 | Applying one coat of cement primer of approved brand and manufacture on wall surface:. |
| 2 | Finishing walls with Acrylic Smooth exterior paint \\"Trump\\" of M/s Snowcem India Ltd or equivalent of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface) ( S.l.No. : 13.79B.2/153) |
| 3 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete (Hard & Soft wood) |
| 4 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead:With cement mortar 1:4 (1 cement : 4 fine sand) (S.I. No. 14.1.1/157) |
| 5 | Distempering with oil bound washable distemper of approved and manufacture to give even shade. (one or more coats) |
| 6 | Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. completed. |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.(One or more coats on old work). |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Unit:Sqm |
| 9 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :One or more coats on old work.(14.53.1) |
| 10 | Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete. Old work (One or more coats)( S.l.No. : 16.47.2) |
| 11 | Texture painting with high gloss on wood work in required color/wooden shade texture: Preparation of the surface of door / window / frame with emery paper to systematically remove existing old enamel paint, repairing the door / window / frame’s surface with approved putty as per direction of Engineer in charge, preparing the surface with a base coat of enamel paint as per required shade, after the paint surface dries, rubbing it again with emery paper, making fibers from the surface with spirit, red grain, yellow paper and cotton, after drying, polishing the surface with touch wood. (All Materials, T&Ps required to complete the work is within the scope of contractor.) |
| 12 | Lacquer polishing in required colour & shade over new wooden work/ surface of furniture, fixtures, partitions etclacquer polishing in required colour & shade over new wooden work/ surface of furniture, fixtures, partitions etc., all complete by sand papering/ rubbing/ sealing & other activities in relative manner, with applying two or more coats of lacquer polish after preparation of finished base over coat/s of sealer as per direction of Engineer I/c. Please Enable Macros to View BoQ information |
