Tender For Renovation And Modernization Of The Existing Guest House Situated At Loktak Project.
Tender Value
2.26 Crore
Estimated cost
Bid Submission
11 Jul 2026
9 days left
EMD
4.54 Lakhs
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Churachandpur → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Modernization Of The Existing Guest House Situated At Loktak Project.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of 15.25.1 GS Sheet. |
| 2 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead. 15.13.1 of sectional area 40 square centimetres and above. |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge 15.6.1 In Cement mortar. |
| 4 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.12.1 of area 3 sq. metres and below. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.22.1 For thickness of tiles above 10 mm and upto 25 mm. |
| 6 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 7 | Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. |
| 8 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per direction of engineer in- charge. |
| 9 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 10 | Earth work in excavation by mechanical means (Hydraulic Excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: 1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. 5.20.1 Thermo-Mechanically treated bar. |
| 13 | Reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding all complete: Above Plinth level. 5.20A.2 Thermo-Mechanically treated bar. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. |
| 15 | Providing and laying position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 5.1.1 (1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size). |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering, shuttering, finishing and reinforcement 5.2.1 (1 cement: 1.5 coarse sand: 3 graded stone aggregate cum 20 mm nominal size). |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for (5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 5.3 (1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 19 | Brick work with 1st class common burnt clay F.P.S. (non-modular) bricks in foundation and plinth in: 6.1.1Cement mortar 1:4 (1 cement: 4 coarse sand). |
| 20 | Brick work with 1st class common burnt clay F.P.S. (non-modular) bricks in superstructure above plinth level upto floor V level in all shape and sizes in: 6.1.1Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 21 | Half brick masonry with 1st class common burnt clay F.P.S. (non-modular) bricks in superstructure above plinth level upto floor V level in: 6.9.2Cement mortar 1 : 4 (1 cement : 4 coarse sand). |
| 22 | 12mm cement plaster of mix1:4 (1cement:4 coarse sand). |
| 23 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting. hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. comploto.10.16.3 Electric resistance or induction butt welded tubes. |
| 24 | Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self-drilling itself tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with: 12.46.2 Pre-coated galvanised iron profile sheets 0.40 mm thick. |
| 25 | Providing and fixing pre-coated galvanised steel sheet roofing accessories, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws or with polymer coated J or L hooks, bolts and nuts and or C.I. seam bolts and nuts, G.l. plain and bitumen washers complete: Ridges Plain (500-600mm) 12.47.1.2 Pre-coated galvanised iron profile sheets 0.40 mm thick. |
| 26 | Providing and fixing pre-coated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws or with polymer coated J or L hooks, bolts and nuts and or C.I. seam bolts and nuts, G.l. plain and bitumen washers complete: Gutter (600 mm over all girth) 12.47.6.2 Pre-coated galvanised iron profile sheets 0.35 mm thick. |
| 27 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 120 gms/ sqm (both sided inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x25xO.55mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.l. channels 45x15xO.9 mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to Gil. intermediate channel with connecting clips made out of 2.64mm diax230mm long C.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long drive-all screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed. all complete as per drawings, and specification and direction of the Engineer in Charge but excluding the cost of painting with •12.41.1 12.5 mm thick tapered edge gypsum Plain board board conforming to IS: 2095- Part I. |
| 28 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 29 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.13.63.3 with water thinnable cement primer on wall surface having VOC less than 50grams /litres. |
| 30 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.43.1 Two or more coats on new work. |
| 31 | Finishing walls with water proofing cement paint of required shade.13.32.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 32 | Supplying and filling in plinth with sandy soil under floors including, cum 762.15 watering, ramming consolidating and dressing complete. |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm. |
| 34 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in alt colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (I cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing wood work in frames of doors, windows, clerestory windows and other frames. wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately 9.1.3) Local best quality Tolhao wood. |
| 36 | Providing & fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling or panelled or panelled and glazed shutters 25 mm to 40 mm thick: 9.6.1 Local best quality Teak wood.9.6.1.1 35mm thick. |
| 37 | Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. 9.147.B1.2 Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre). |
| 38 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. |
| 39 | Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A4.2 Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). |
| 40 | Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete. |
| 41 | Providing and fixing IS : 12817 marked stainless steel butt hinges with steel screws etc. complete : 9.40.1) 125x64x1.9 mm. |
| 42 | Providing & fixing ISI Marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete. 9.38.1) 125mm. |
| 43 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 9.36.1) 250x10mm. |
| 44 | Providing and fixing ISI marked oxidised M.S. Sliding door bolts with screws etc. complete 9.35.1) 300x16 mm. |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 16.2.1. W.C. pan with ISI marked white solid plastic seat and lid. |
| 46 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 47 | Providing and fixing mirror of superior glass (of approved quality)and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :16.28.2 Rectangular shape 453x357 mm. |
| 48 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 16.34.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 49 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :16.9.1 Kitchen sink with drain board 16.9.1.1 510x1040 mm bowl depth 250 mm. |
| 50 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes (12.37.1) 75 mm diameter. |
| 51 | Providing and fixing CP Brass long nose bib cock of approved quality conforming to IS Standards and weighing not less than 810 gms 17.25.1 15mm nominal bore. |
| 52 | Providing and fixing CP brass shower rose with, 15mm to 20mm inlet :17.13.1 100 mm diameter. |
| 53 | Providing and fixing CP Brass single lever telephonic wall mixer of quality and make as approved by Engineer in charge. |
| 54 | Providing and Fixing 20mm plank as eave board with:- 9.75.2 Tolhao /Uchan wood. |
| 55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 17.3.8 80 mm nominal outer dia Pipes. |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 17.3.9 100 mm nominal outer dia Pipes. |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 17.1.1 15 mm nominal outer dia Pipes. |
| 58 | Add EPF @ 3.25% |
| 59 | Add CESS @ 1% |
| 60 | Add GST @ 18.00% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 days