Drinking Water Supply and Sanitation Local Bodies Closing in 0 days TDR #56096415

Tender For Providing Of 7.5 Hp Submersible Motor Pumpset, Upvc Pipe, Cable At Vedathalangadu & Water Supply Distribution Main At Alangadu, Karuv Alayam Ad Colony In Ward No.43, Water Supply Distribution Main At Chekkukaran Thottam In Ward No.52, 10Hp

Issued by Local Bodies · Tiruppur, Tamil Nadu
Tender Value
8.80 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
0 days left
EMD
17600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Of 7.5 Hp Submersible Motor Pumpset, Upvc Pipe, Cable At Vedathalangadu & Water Supply Distribution Main At Alangadu, Karuv Alayam Ad Colony In Ward No.43, Water Supply Distribution Main At Chekkukaran Thottam In Ward No.52, 10Hp Openwell Submersible Pumpset At Veerapandi In Ward No.54.Estimate Amount : Rs.8.80 Lakhs

BOQ

Name of Work:- Providing of 7.5 HP Submersible Motor Pumpset, UPVC Pipe, Cable at Vedathalangadu & Water Supply distribution main at Alangadu, Karuv alayam AD Colony in ward no.43, Water Supply Distribution main at Chekkukaran Thottam in ward no.52, 10HP openwell submersible pumpset at Veerapandi in ward no.54.Estimate Amount : Rs.8.80 Lakhs
Sl. No. Item Description
1Supply and delivery of 200 x 125 LPM 10 HP Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. Thenon-return valve located at the top of the pump in the discharge outlet connection is to be designedwith minimum friction. The pump should be directly coupled to 2880 RPM, three phase,50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP,Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HPstarting and for continuous operation.
2Supply and delivery of 10 HP Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated verminproof box, including the capacitor (the cost of capacitor is to be taken separately).
3Supply of 3.00 x 4.00Sq.mm Flat Submersible Cabel of ISI / IS make etc., complete as per standard specifications.
4Labour charges for the erection of 10 HP submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
5Supply and delivery of the following size of PVC pipes with ISI specification as directed by the departmental officers including cost and conveyance the same to the departmental store etc complete as per standard specification.
663mm Dia PVC Pipe
7Earthwork excavation and depositing on bank with initial lead and lift as initial of 10 M and lift of 2 M in narrow trenches for laying of pipes for water supply works in Hard stiff clay, stiff black cotton, hard red earth shales, murram gravel, stoney earth and earth mixed with small size boulders and hard gravel soil including refilling the sides of foundation in layer of 15m thick watering ramming depositing the surplus earth in the premises as directed by the departmental officers etc., complete complying with standard specification.
8Laying and joining the PVC pipes, conveyance the same to the work site and lowering in to the trench and joining the same in proper gradient as directed by the departmental officers and tested in to the required pressure water convey with an average lead etc complete as per the standard specification.
963mm Dia PVC Pipe
10Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
115000 Litre
12Supply and delivery of clear water vertical wet type 7.5 HP submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted 100x175 LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283/1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ+/- 5 %
13Supply of 3.00 x 4.00Sq.mm Flat Submersible Cabel of ISI / IS make etc., complete as per standard specifications.
14Supply and delivery of the following size of 65mm UPVC pipes with ISI specification as directed by the departmental officers including cost and conveyance the same to the departmental store etc complete as per standard specification.
15Labour charges for the erection of 7.5 HP submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
16Flushing of Borewell of 6\\" dia using drill rods / hose with required size of pipes for various capacity compressor including transportation, labour and fuel charges for compressors etc., Complete as per Lowest Quotation.
17Add G.S.T. @ 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56096415
AUTHORITY Local Bodies
TENDER VALUE 8.80 Lakhs
LAST DATE 06-07-2026
Authority
Authority Name Municipal Adminitration And Water Supply Department
Work Description Tender for Providing Of 7.5 Hp Submersible Motor Pumpset, Upvc Pipe, Cable At Vedathalangadu & Water Supply Distribution Main At Alangadu, Karuv Alayam Ad Colony In Ward No.43, Water Supply Distribution Main At Chekkukaran Thottam In Ward No.52, 10Hp Openwell Submersible Pumpset At Veerapandi In Ward No.54.Estimate Amount : Rs.8.80 Lakhs
Basic Detail
Tender No 23/2026-27/Z4/EE,TCMC
Bidding Type Tender
Location
City Tiruppur
State Tamil Nadu
Key Dates
Publish Date 21 Jun 2026
Submission Date 06 Jul 2026
Open Date 06 Jul 2026
Finance
Tender Value 8.80 Lakhs
Tender Fee Ref. Documents
EMD 17600
Exemption Not Available
Document List
05Conditions.pdf
7347b75a-d00c-4e52-9a00-39a8f83d9d5e.html
BOQ_819872.xls
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 06, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

05Conditions.pdf

html

7347b75a-d00c-4e52-9a00-39a8f83d9d5e.html

xls

BOQ_819872.xls

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders