|
| 1 | Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder @0.03Cum of premixed macadam), complete all as specified and directed. |
| 2 | Scarifying or picking graveled, macadam or bituminous macadam surface in area n.exc 400 sqm/ road cutting for drainage chamber, drainage pipe etc depth n.exc 50mm including removing the rubbish material not exc 500 mtr, complete all as specified and directed. |
| 3 | M&L for preparation of bituminous and applying evenly a prime coat of cationic bitumen emulsion SS1 conforming to IS: 8887 at a rate of application of @ 7.5 kg/10sqm using primer distributor which shall be self-propelled or towed bitumen pressure sprayer complete all as specified and directed. |
| 4 | M&L for premixed bituminous macadam, laid/ rolled & compacted to required gradient & camber (consolidated thickness 75mm or less) with bitumen VG-10 @ 4% by weight of total mix, complete all as specified and directed. |
| 5 | M&L for preparation of bituminous and applying evenly a Tack coat conforming to clauses 503 of MoRTH specification for road and bridge works (Fifth Revision), with cationic bituminous emulsion RS1 grade, confirming to IS 8887 (latest edition) @ 2.5 kg per 10sq meters using primer distributor which shall be self- propelled or towed bitumen pressure sprayer, complete all as specified and directed. |
| 6 | M&L for bituminous premix asphaltic semi-dense concrete 40mm consolidated thickness with 6% binder content using paving bitumen of grade VG 10 by weight of total mix, spread by means of mechanical paver, rolled and compacted to required camber and gradient with power roller 8 to 12 tonne to a uniform smooth surface, complete all as specified and directed. |
| 7 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour white and yellow confirming to BS 3262-1989 with special applicator machine, all as per manufacturer's instructions, complete all as specified and directed. |
| 8 | S&F in repair cat eye, dual (62 beads minimum), aluminium casted body, of size 100mm x 100mm x18.5mm, having ABS plastic strip containing 62 mini retro reflective glass beads of colour white/ red/ yellow on both sides (minimum 31 beads on each sides) and fixed complete with steel zinc plated nails/ stud of dia 12mm and of length 120mm, complete all as specified and directed. Note:- (i) Fixing arrangement shall be as per manufacturer's instructions. (ii) Designed to bear 25 Tonnes load and having impact strength of 253 KN. |
| 9 | S&F in repair solar road stud 125x125x25mm made from aluminium alloy, solar powered by monocrystal solar panel with following specification : - (i) Battery type - One high capacity Ni-Cd rechargeable battery(ii) LED shall be 10 mm, 3 piece each side and total 6 piece for high brightness of different colours.(iii) Back up time shall not less than 12 hours of continuous lighting at night. (iv) Design to bear 25 Tones and having impact strength of 253 KN.Make : Green lite/ 3M / Shakti/ Dark eye |
| 10 | S&F in repair road convex mirror of dia 60 cm, fitted in orange colour cap body of ABS with glass mirror made up of unbreakable poly-carbonate including MS Pipe vertical post pipe Gde-30-G fixed with nut and bolts and clamp system with stainless steel bracket, including necessary excavation of post holes and embedded in cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate, complete all as specified and directed. |
| 11 | Demolition of cement concrete(un-reinforced) of any descriptions, in ground floors not exc 150mm thick, above or below ground level, complete all as specified and directed. |
| 12 | M&L for 100mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base for flooring, complete all as specified and directed. |
| 13 | M&L for machine pressed precast concrete interlocking paver block of any coloured any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and no pigment over and including 25 mm sand cushion, complete all as specified and directed. |
| 14 | M&L for PCC1:2:4, type B-1, using 20mm graded crushed stone aggregate as in roof kerbs of mud stops, rounded or chamfered on edges, complete all as specified and directed Please Enable Macros to View BoQ information |
