Tender For Cleaning & Repair Of Sewage Line In The Area Of Hastings, Clyde Row Under Ge (C) Kolkata
Tender Value
40 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning & Repair Of Sewage Line In The Area Of Hastings, Clyde Row Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: CLEANING & REPAIR OF SEWAGE LINE IN THE AREA OF HASTINGS, CLYDE ROW UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed. |
| 4 | Dismantling Wrought Iron or Mild Steel Work, viz. MS Flat Iron (Wind Tie) and Similar Work including MS Bolts, Nuts, etc., complete all as specified and as directed. |
| 5 | Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed. |
| 6 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 7 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed. |
| 8 | Demolition and breaking of drain pipe (salt glazed wire, AC or reinforced concrete) set in cement mortar for 150mm dia pipe complete all as specified and as direceted. |
| 9 | Dismantling 100mm bore Cast iron pipe, jointed in cement mortar in foul places including necessary scaffolding upto four story height of building complete all as specified and as directed. |
| 10 | Taking down PVC (SWR) soil/RWP pipe including all fittings such as bend shoe etc complete including necessary scaffolding complete all as directed by Engr-in-charge |
| 11 | Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exc. 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 12 | Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed. |
| 13 | Removing excavated Material (Soil) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed. |
| 14 | M&L Plain Cement Concrete type C2 (1:3:6) using 40 mm graded aggregate) in Foundation, Filling and Mass Concrete (bed and side of gully trap), complete all as specified and as directed. |
| 15 | M&L Pre-cast Reinforced Cement Concrete type B1(1:2:4) using 20 mm graded crushed stone aggregate) as in Cover Slab of Man Holes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., including demolition complete all as specified and as directed.NOTE : Reinforcement shall be measured and paid separately under relevant Item. |
| 16 | M&L Uprooting of tree from walls of bldgs up to extended root and spraying of acid of required quantity complete from any location of Bldg up to 4 storied and making good disturbed surfaces with cement mortar (1:4) or cement concrete type C1(1:3:6) using 20mm graded aggregate including necessary scafolding complete for tree of girth up to 5cm to10 cm complete all as specified and as directed. |
| 17 | M&L Plain Cement Concrete type B-1, (1:3:6) (20mm graded crushed stone aggregate) as in Coping ,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 18 | M&L Plain Cement Concrete type B1 (1:2:4), using 20mm graded crushed stone aggregate as in surface channels and drains complete all as specified and as directed. |
| 19 | M&L Plain cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) as in bed block for embedding angle iron fencing post. complete all as specified and as directed. |
| 20 | M&L fly ash bricks pulverizes using class designtion 75 (kgf/cm2) bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified and directed. |
| 21 | M&L Brick Work EXCEPT BRICKS (using old bricks obtained from demolition), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 22 | M&L Brick Work using class designtion 75 (kgf/cm2) bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 23 | S&F TMT bars 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 24 | S&F Roof trusses (framed) , trussed , purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or Flat section) including distance pieces , cleats etc Fe-410W (Gde E-250 Quality `A' complete all as specifed and directed. |
| 25 | M&L mild steel Framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete Fe 410 -w(Gde E-250) quality B) complete all as specified and as directed. |
| 26 | M&L Mild Steel Plain Black Sheet 1.6mm thick in Hearths, covering to Door Shutters, covering to steel gates, etc. cut to size edges beaded if directed, holes punched including round headed Screws Clout screws including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, as in repair complete all as specified and as directed. |
| 27 | S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 28 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screw complete all as specified and directed. |
| 29 | S&F only old galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having any strength of 550 Mpa as in roof covering/ cladding to wall /sunshade etc, EXCEPT SHEET fixed with self tapping screws complete all as specified and as directed.Note :- Galvalume sheet obtained from dismantling shall be reused item here-in-before. |
| 30 | M&L Cement Concrete type C2(1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection, etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 31 | M&L 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 32 | M&L Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including taking down unserviceable tiles complete all as specified and directed. |
| 33 | Supply and Fix non skid external paver Tiles of size 300mm x300mmx 10mm thick, suitable for hi-turf external tiles, anti skid, scratch resistance and neutral to UV rays and acid/ alkali resistance as in floor over and including 15mm thick cement sand screed bed 15mm thick 1:4 complete all as specified and as directed including dismantling old unserviceable tiles with screed bed. |
| 34 | M&L Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) over 15mm thick screed bed/bedding layer in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including taking down stone slab complete all as specified and directed. |
| 35 | M&L Coloured non skid ceramics tiles, joint free 7 to 8mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors over and including 15mm thick screed bed/bedding layer in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor complete all as specified and as directed. |
| 36 | M&L Glazed Ceramic Coloured Tile 350x250 x 7.0mm /450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed. |
| 37 | Material and labour Rendering 15 mm thick on brick or concrete surface in CM 1:4 and surface finished using extra cement slurry as neeru finish on brick, concrete surfaces upto any height necessary scaffolding and safety measure complete all as directed by Engr-in-Charge. |
| 38 | M&L Rendering 15mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 5mm thick in cement morter (1:4) using water proofing compound and finishing the surface even and smooth without using extra cement including necessary scafolding and saftey measures complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately) |
| 39 | \\"Supply only\\" liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 40 | M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Based Paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 41 | M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed. |
| 42 | M&L Salt-Glazed Stoneware Drain Pipes of Internal dia 150mm Grade ‘A’, laid in concrete bed at trenches, jointed in Cement Mortar 1:1 and tested, complete all as specified and as directed.NOTE : Earthwork shall be Measured and Paid separately under relevant Item(s). |
| 43 | M&L Salt-Glazed Stoneware Drain Pipes of Internal dia 200mm Grade ‘A’, laid in concrete bed at trenches, jointed in Cement Mortar 1:1 and tested, complete all as specified and as directed.NOTE : Earthwork shall be Measured and Paid separately under relevant Item(s). |
| 44 | M&L Cement Concrete type C2 , 1:3:6 (40mm graded aggregate) as in Concrete bed to salt-glazed stoneware drain pipes of internal dia 150mm, including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed. |
| 45 | M&L for Concrete bed Type C-2 (1:3:6) (Using 40mm graded crushed stone aggregate) to 200mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed |
| 46 | S&F 450mm dia 50mm thick RCPC (Reinforced Cement Polymer Concrete) Man hole cover slab of 3MT capacity fixed in proper position as in repair complete all as specified and as directed. |
| 47 | S&F 600mm dia 50mm thick RCPC (Reinforced Cement Polymer Concrete) Man hole cover slab of 3MT capacity fixed in proper position as in repair complete all as specified and as directed. |
| 48 | S&F RCPC (Reinforced Cement Polymer Concrete) drain cover slab of size 750mm x 450mm x 75mm thick, of capacity 5 MT placed in proper position as in repair complete all as specified and as directed. |
| 49 | S&F RCPC (Reinforced Cement Polymer Concrete) drain cover slab of size 900mm x 450mm x 75mm thick, of capacity 5 MT placed in proper position as in repair complete all as specified and as directed. |
| 50 | S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flush -ing Cistern and connected Items, complete all as specified and as directed. |
| 51 | S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with \\"p\\" or \\"s\\" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed. |
| 52 | Supply and fix in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor all as specified and directed by the Engr-in-Charge. |
| 53 | S&F One piece EWC Cascade type (coloured) floor mounted water closet with low level flushing cistern coloured with floor trap, PVC coloured seat cover and connecting pipe etc and making all necessary connections etc as in repair complete all as specified and as directed. |
| 54 | S&F Health faucet with chomium plated with flexible cord fixed on wall screwed down for iron pipes,including necessary fittings etc as in repair complete all as specified and as directed. |
| 55 | S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 56 | Refixing of old serviceable PVC (SWR) pipe, 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. |
| 57 | S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed. |
| 58 | S&F PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. |
| 59 | S&F PVC (SWR) Branch Pieces 110mm bore (dia), Single (Single Y) equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 60 | S&F 100mm bore cast iron soil waste and vent pipes in any length with or without ears with cement joint fixed to walls including pipe nails, distance pieces, plugs holder bats etc.including scafolding complete all as specified and as directed. |
| 61 | Refixing Old serviceable 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls or floors and disturbed portion of the wall making good with cement concrete in (1:2:4) including distance pieces, plugs, holder bats up to four story height of building with scaffolding etc cmplete all as specified and as directed. |
| 62 | S&F Cast Iron Bend 100mm bore (dia), any radius, Disminishing Pieces or Tapers (Large Bore measured) and fitted with Oval Access Doors including Jointing with Cement Mortar 1:1, complete all as specified and as directed. |
| 63 | M&L Cleaning of blocked kitchen trap / nahani trap / floor trap/ Water closet of any type / pattern with vaccum pump upto 1st manhole and making the drain channel fully functional by flushing with sufficient quantity of water to entire satisfaction of Engineer-in-Charge including cleaning of 1st manhole and removing the waste materials / sludge etc to a distance outside residential area nexc 50m and buring the same in a pit and spreading bleaching powder surrounding the area @ 1Kg/ Sqm and sealing the top with fine sand of suitable depth complete all as specified and as directed.Note:-(i) Cost of earth work in excavation required for digging the borrow pit and buring the the waste materials / sludge in the borrow pit and sealing the pit with fine sand and spreadind of bleaching powder shall deemed to be included in the rate quoted.(ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Engineer-in-Charge. |
| 64 | M&L Cleaning of manhole size 900 mmx900mm of depth not exc 1.50 metre each, by taking out accumulated sludge, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), complete as directed by the Engineer-in-Charge.Note:-(i) Disposal of sludge obtained shall be disposal of in pit made by contractor and shall be covered with soil..(ii) Rate of disposal of sludge are inclusive in quoted rates.(iii) Cost of pit shall be deemed to be included in the item rate quoted. |
| 65 | Cleaning of manhole size 1200 mm x 1200mm of depth not exc 1.50 metre each, by taking out accumulated sludge, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), complete as directed by the Engineer-in-Charge.Note:-(i) Disposal of sludge obtained shall be disposal of in pit made by contractor and shall be covered with soil..(ii) Rate of disposal of sludge are inclusive in quoted rates.(iii) Cost of pit shall be deemed to be included in the item rate quoted. |
| 66 | M&L Cleaning of existing covered (partly / semi or fully filled up) drain, of any opening width and depth by removing and refixing of cover-slab, taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and flushing with sufficient quantity of water etc. and cutting of the bushes both side of drain upto 0.5 mtr each side and and removing the same to a distance complete all as specified and as directed by the Engineer-in-Charge. Note:-(i) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Engineer-in-Charge. |
| 67 | M&L Cleaning of existing uncovered (partly / semi or fully filled up) drain, of any opening width and depth , taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and flushing with sufficient quantity of water etc. and cutting of the bushes both side of drain upto 0.5 mtr each side and and removing the same to a distance exceeding 50 meter but nexc 100m complete all as specified and as directed by the Engineer-in-Charge. Note:-(i) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Engineer-in-Charge. |
| 68 | M&L Cleaning of under rain water / waste pipe of any dia by rodding / bamboo split including removing and refixing of eye cover in existing position and taking out waste and foreign materials and flushing with sufficient quantity of water etc. and cutting of the bushes both side of sewage line upto 0.5 mtr each side and removing the same to a distance not exceeding 50m where directed, complete all as directed by the Engineer-in-Charge.Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost.(ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Engineer-in-Charge. |
| 69 | M&L Cleaning of all debris / vegitation over roof surfaces of accessible or unaccessible roof portion upto any height and the mouth of rain water pipe and around the tanks area and removal of materials outside the MOD land including necessary scaffolding and safety measures complete all as directed by Engineer-in-Charge. |
| 70 | M&L Cleaning of existing 100mm dia / 150mm dia sewage line upto 1.50m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid / semi liquid / solid sludge etc including dewatering, desilting and well flushing the line with water and testing on completion complete as directed by the Engineer-in-Charge.Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost.(ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Engineer-in-Charge. |
| 71 | Cleaning of existing 200mm dia sewage line upto 1.50m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid / semi liquid / solid sludge etc including dewatering, desilting and well flushing the line with water and testing on completion complete as directed by the Engineer-in-Charge.Note:-(i) Once cleaned the sewage lines, the Contractor shall maintain the lines functional upto the date of Completion at his own cost.(ii) Any damged done by the Contractor during cleaning shall be make good by the Contractor at his own cost upto the satisfaction of Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender