Tender For Internal Periodical And Other Misc Works In Offrs Md Accn Of Bhattacharya Enclave Under Ge (C) Kolkata
Tender Value
40 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Periodical And Other Misc Works In Offrs Md Accn Of Bhattacharya Enclave Under Ge (C) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE ( C ) KOLKATA Name of Work: INTERNAL PERIODICAL AND OTHER MISC WORKS IN OFFRS MD ACCN OF BHATTACHARYA ENCLAVE UNDER GE (C) KOLKATA Contract No: GE (C )/KOL/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # ItemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Demolition Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc, but excluding Ashlar Facings, dressed Stone Work and Pre-cast Concrete Articles of any descriptions, complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc. 1.00 Sqm but n.exc 2 Sqm each and removing from site or to store as directed by Engineer in charge. |
| 4 | Taking down PVC door chowkats or frames with PVC shutter exc. 1.00 Sqm and n.exc 2 Sqm each complete all as specified and directed. |
| 5 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debris/ rubbish, etc., complete all as specified and as directed. |
| 6 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 7 | Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 9 | M&L Brick work with fly ash bricks designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 10 | M&L Brick Work with Sub-Class ‘B’ well burnt clay Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 11 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 12 | S&F for Factory Made Solid PVC Molded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Molded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, fixed to frame at site complete all as specified and directed. |
| 13 | S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to chowkhats complete all as specified and directed. |
| 14 | M&L 2nd class hardwood plain fillets square rectangular or triangular in section, wrought fixed with screws area exc. 3 Sqcm but n.exc 6 Sqcm complete all as specified and directed. |
| 15 | S&F 20 mm dia Fancy type, Chromium Plated colour coated ( any coloured) curtain rod fixed to bracket/ pelmet box complete all as specified and as directed. |
| 16 | S&F Chromium plated Bracket for curtain rod in any size complete all as specified and as directed. |
| 17 | S&F Stainless Steel Butt Hinges, size of Hinges 100mm, medium weight, complete all as specified and as directed |
| 18 | S&F Aluminum anodized, barrel tower bolts of extruded section, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 19 | S&F Aluminum alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 20 | S&F 250 mm long Aluminum alloy, anodized, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminum alloy and fixed, complete all as specified and as directed. |
| 21 | S&F in repair 30mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed. |
| 22 | S&F Aluminum body(extruded section) door closer hydraulically regulated, designation No 3, universal type suitable for door shutters of 1000 mm in width and weight between 61 to 80 kg and fixed as in repair complete all as specified and as directed. |
| 23 | S&F in repair Floor door stopper of steel body and overall length of cover plate 75 mm and tongue anodized with hard drawn steel spring as in repair complete all as specified and directed. |
| 24 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work complete all as specified and directed. |
| 25 | S&F in repair Powder coated anodized aluminum sliding fly proofing window, three tier (two shutter of glass and one shutter on wire mesh) without glazing bar, window shutter style shall be 40mm X 19mm, sheet thickness 1.5mm ,sliding channel 3mm thick channel width shall be as required and directed by Engr-in-Charge with roller. Frame (Chowkats) of window shall be 75mm X 60mm X 1.5mm thick section with or without rebate with 5.5mm thick tinted glass and galvanised wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm aluminum glazing clips fixed with rubber gasket locking arrangement all as directed by Engr-in-Charge.Note - (i) Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixture and no cost extra shall be paid separately.(ii) Cost of glass and wire cloth shall be included in quoted rates. |
| 26 | M&L for Repairs to any type of Aluminum Doors, Aluminum Windows, Aluminum Ventilators, Aluminum Louvers, Aluminum CB shutters etc of any description, in any situation by taking down & refixing shutter including replacement of joining cleats, glazing clips, rubber neoprene packing, aluminum snap beading, screws & tightening, adjustment etc ,making smooth functioning (proper closing, opening) etc with entire satisfaction of Engineer-in-charge complete all as specified and directed. |
| 27 | M&L for Petty repairs to wardrobes, cupboard, kitchen cabinet, Showcase items of any description in any situation including Resecuring, easening of shutters, shelf etc including taking down and refixing in position with new nut, screw ,washer etc including adjusting, tightening of builders hardware such as lock, wiremess, glass pane, Ball catches, knobs ,hasp and staple ,piano hinges, handles & refixing builders hardware in same/other position making smooth functioning (proper closing, opening) etc with entire satisfaction of Engineer-in charge complete all as specified and directed |
| 28 | M&L for Repairs to any type of wooden joinery works of shutters, shelf etc such as door, window, Ventilator of any description in any situation by taking down & refixing in the same opening including Resecuring, easing, adjusting ,refixing builders hardware butt hinges, tower bolts,handles,sliding door bolts,rat tail,lock,ball catches,knobs,hasp & staple,peg set,door stopper,piano hinges,door cill strip etc wiremess,glass pane in same/other position, renewal of screws, welding (if required) etc,wooden beading & tightening of GI/steel wiremesh etc making smooth functioning (for proper closing ,opening) etc with entire satisfaction of Engineer-in-charge complete all as specified and directed |
| 29 | S&F in repair 18/19 mm pre-laminated particle board medium density flat pressed single layer type or three layers type with BWR type adhesive as in cup baord shelf, Pelmets, wall paneling etc commercial finfished both side and properly sealed with 5 mm thick 2nd class hard wood beading (incl two coat of painting/polishing for beading) including Extruded aluminium alloy handles 150mm size fabricated type anodised handle per leaf after taking down unserviceable particle board incl taking down old one and disposing off in low lying area complete all as specifeid and directed. |
| 30 | M&L Glazed Ceramic Coloured Tile 450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed. |
| 31 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 32 | M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. |
| 33 | M&L Vitrified Ceramic Tiles 10 mm thick (square/ rectangular) in dark Shade, Polished, area of each tile not exc 0.36 sqm as in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 20mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed. |
| 34 | M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, including demolition of old tiles complete all as specified and as directed. |
| 35 | M&L for 5 mm thick plaster on brick or concrete surfaces of wall in CM 1:3 and finished even and smooth without using extra cement complete all as specified & directed. |
| 36 | M&L 15mm thick plaster in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed. |
| 37 | M&L Preparing old decorated Plaster Surfaces of Ceiling and applying One Coat of oil bound distemper (any colour /tint) complete all as specified and as directed. |
| 38 | M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of oil bound distemper (any colour /tint) complete all as specified and as directed. |
| 39 | M&L preparing new plastered surfaces of wall and and applying Two Coats of Distemper Oil Emulsion over a coat of primer over and including 2mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and as directed. |
| 40 | M&L preparing new plastered surfaces of ceiling surface and and applying Two Coats of Distemper Oil Emulsion over a coat of primer over and including 2mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. complete all as specified and as directed. |
| 41 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over 2mm thick water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 42 | M&L for preparation of old plastered Surfaces of Walls and applying One Coats of Exterior Emulsion Weather Coat Paint over a coat of Primer (as per Manufacturer’s instructions) complete all as specified and directed. |
| 43 | M&L Acrylic Oil bound Distemper on existing surface with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :-(i) M&L Preparing Masonary surfaces cracks, large pores, dents or damaged portion with smart care crack seal.(II) M&L Applying two coats of smart care damp block 2K slurry by brush or roller over brick masonary surfaces,Allow 1st coat to dry for 4-6 hrs and then apply 2nd coat . (III) Applying a coat of 2mm thick acrylic wall putty (Make JK/Asian/Birla)(VI) Applying a coat of interior wall primer after smoothing wall putty surfaces with sand paper and two coat of acrylic oil bound distemper complete all as specified & directed.Note : Mixing of smart care damp block 2k , 60% powder and 40% liquid and use mechenaical stirrer |
| 44 | S & F in repair, 4.00mm thick selected quality tinted sheet glass ,glazing ,fixed with including necessary joining cleats,glazing clips, ruber neoprene packing etc in any type of Aluminum Windows, Aluminium Ventilators, Aluminium Louvers complete all as specified and directed.Note : Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to twelve storeys height of bldgs. |
| 45 | S & F in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including if required fixing with wooden beads or MS flat of size 15mmx3mm & chromium plates screws/using metal nut and bolts or wooden beading,aluminium window fittings,neoprine rubber gasket etc if required including necessary scaffolding up to twelve storeys height of bldgs complete all as specified and directed |
| 46 | M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 47 | M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 48 | Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel plaint over a coat of red oxide all as specified and directed by Engineer-in-Charge. |
| 49 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, etc up to four stories height of bldgs. complete as all specified and as directed. |
| 50 | M&L Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of laddings, steps, cills, sushades, shelves, lintels etc and cutting chase for concealed water tubing or concealed coduit wiring etc and making good cutting grith n exc 10 cm girth on brick walls complete all as specified and directed. |
| 51 | S&F 20mm bore brass MTA for CPVC pipe as in repair complete all as specified and directed. |
| 52 | S&F 20mm bore brass FTA for CPVC pipe as in repair complete all as specified and directed. |
| 53 | S&F 20mm bore brass elbow for CPVC pipe as in repair complete all as specified and directed. |
| 54 | S&F 20mm bore brass Tee for CPVC pipe as in repair complete all as specified and directed. |
| 55 | S&F 25mm bore dia of pipe Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed as in repair complete all as specified and directed. |
| 56 | S&F 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm for any type/make/size for stainless steel sinks, basins,urinal etc as in repair complete all as specified and directed. |
| 57 | S&F 32 mm dia Flush pipe of low/high density polyethylene pipe as directed including jointing to any type of WC and any type/size/make of low level flushing cistern and make good dismantle floor to match the existing surfaceas in repair complete all as specified and directed. |
| 58 | S&F 3-in-1 wall mixer for Hot & Cold water supply with telephonic shower arrarengement, brass chromium plated fancy type, screwed down for 15mm bore iron pipe incl necessary fittings & fixtures etc.as in repair complete all as specified and directed. |
| 59 | S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. |
| 60 | S&F CP Kitchen sink mixture with regular swinging spout (wall mounted model) chromium plated screwed down for iron pipes,including necessary fittings etc as in repair complete all as specified and as directed. |
| 61 | S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. |
| 62 | S&F in repair stainless steel utencil plate rack (size 900 x 1200 x 200 mm) using 1.0mm thick sheet with all fittings accessories complete as directed. |
| 63 | S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with \\"p\\" or \\"s\\" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cover (coloured) fixed with mild steel chromium plated or aluminium hinging device including taking down old unserviceable one complete all as specified and as directed. |
| 64 | S&F in replacement Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding complete all as specified and as directed. |
| 65 | S&F One piece EWC Cascade type (coloured) floor mounted water closet with low level flushing cistern coloured with floor trap, PVC coloured seat cover and connecting pipe etc and making all necessary connections etc as in repair complete all as specified and as directed. |
| 66 | S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. |
| 67 | S&F Brass chromium plated fancy type bib cock screwed for 15 mm bore of pipe etc. as in repair complete all as specified & directed. |
| 68 | S&F Brass chromium plated fancy type stop cock screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed. |
| 69 | S&F Two way bib cock with flange brass chromium plated fancy type screwed for 15 mm bore etc.as in repair complete all as specified and as directed. |
| 70 | S&F Angular Stop cock concealed type ,15 mm dia cast copper alloy chromium plated fancy type with wall flange screwed for iron pipe etc. as in repair complete all as specified and directed. |
| 71 | S&F 125 mm dia brass chromium plated shower rose with or without swivels joint for fixing to 15 mm bore pipe etc complete including taking down old one complete all as specified and directed. |
| 72 | Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. |
| 73 | S&F cast copper alloy health faucet with chomium plated with flexible cord fixed on wall screwed down for iron pipes,including necessary fittings etc as in repair complete all as specified and as directed. |
| 74 | S&F in repair plastic seat and cover white for EWC with flat bottom including hanging device complete all as specified and as directed. |
| 75 | S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed. |
| 76 | S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60,cm long between flanges as in repair complete all as specified and directed. |
| 77 | S&F Toilet paper holder of brass chromium plated fixed to walls with chromium plated brass screw including necessary fixing arrangement as in repair complete all as specified and directed. |
| 78 | S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangement as in repair complete all as specified and directed |
| 79 | S&F Glass shelf assembly consisting of 5.5 mm thick sheet glass self 19-12 cm wide, 60 cm long with chromium plated brackets guard and railing fixed in position with necessary fixing arrangement as in repair complete all as specified and directed. |
| 80 | S&F Glass corner shelf of single set with chromium plated brackets and railing including necessary fittings and fixture as in repair complete all as specified and directed. |
| 81 | S&F PVC bathroom cabinet box with mirror, shutter type of size 500X400 fixed on walls with wooden plugs and and chromium plated brass screw and cup washer as in repair complete all as specified & directed. |
| 82 | S&F Mirror Bevelled Edge 900x600mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers including Taking down unserviceable Mirror, complete all as specified and as directed. |
| 83 | S&F Chromium plated bottle trap ( with internl partitions) 32mm size with 250mm long wall connection including wall flange fixed in position with necessary fixing arrangement as in repair complete all as specified and directed. |
| 84 | S&F Chromium Plated waste coupling heavy grade full thread 32mm (brass) fixed to stainless steel sink including necessary fixing arrangement as in repair complete all as specified and directed. |
| 85 | S&F Chromium Plated Connector pipe for hot water supply of size 600 mm long fixed to 15 mm dia GI pipe with brass nut and spanner including necessary fixing arrangement as in repair complete all as specified and directed. |
| 86 | S&F Stainless steel peg set assembly for 6 hook fixing on door or wall with the help of screw as in repair complete all as specified and directed. |
| 87 | S&F Chromium Plated Telepohne shower with connector pipe & wall hook as in repair complete all as specified and directed. |
| 88 | S&F 600 mm long CP towel rack with lower hanger including complete fittings and fixtures etc as in repair complete all as specified and directed. |
| 89 | S & F in repair PVC tank lid/cover for water storage tank capacity of 250 to 2000 ltrs to matching with existing tank with fixing arrangement complete all as specified and directed. |
| 90 | S & F in repair 100mm dia stainless steel grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed |
| 91 | S & F in repair 125mm dia chromium plated grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed. |
| 92 | Disconnecting existing tanks of capacity exc 250 & not exc 2000 liters setting aside (or lowering, hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation/ Algae around the over head tank after opening tank cover, inlet, outlet etc and reconnecting with GI/CPVC tubing and re-fixing in position , refixing the cover after cleaning all and specified and directed.Note: While cleaning Any CI/GI/PVC pipes and fittings, Float valve damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall includ for use of all scaffolding, protective measures etc up to twelve storeys height of bldgs. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender