|
| 1 | Surface excavaion n exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed |
| 2 | Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed |
| 3 | Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm. complete all as specified and directed |
| 4 | Removing excavated material n exc. 50 metre and depositing where directed at a level n exc. 1.5 metre above the starting point, complete all as specified and directed |
| 5 | M & L Cement concrete 1:4:8 Type D2 (using 40 mm gradded agg) as in foundations, filling and mass concrete complete all as specified and directed |
| 6 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed |
| 7 | M&LBrick work with sub class 'B\\" old size bricks straight or curved of onplan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed |
| 8 | Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 9 | M & L 75 mm thick Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed |
| 10 | M&L 50 mm thick PCC 1:2:4 type B1 using 20mm graded stone agg as in flooring finished even and smooth without using extra cement Alternate pannel complete all as specified and directed |
| 11 | M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded aggregates), as in plinth protection, finished the surface even and smooth without using extra cement, complete all as specified and directed |
| 12 | M&L reinforced cement concrete (Nominal mix type B1 1:2:4 using 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 13 | M&L reinforced cement concrete (Nominal mix type B1 1:2:4 using 20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed |
| 14 | M&L reinforced cement concrete (Nominal mix type B1 1:2:4 using 20mm graded aggregate) Columns, pillars, piers, posts and struts etc; under-reamed piles and mass concrete complete all as specified and directed |
| 15 | M&L reinforced cement concrete (Nominal mix type B1 1:2:4 using 20mm graded aggregate) as in slab supported on wall , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 16 | S&F mild steel TMT bars 10 mm dia and over , cut to length , bent to shape required including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed |
| 17 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed |
| 18 | S&F Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter Flat rough finished surfaces of concrete complete all as specified and directed |
| 19 | S&F form Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, Flat rough finish surface etc.complete all as specified and directed |
| 20 | S&F form Formwork to sides of pillars, posts, struts, piers, columns, and stanchions Square and rectangle or polygon complete all as specified and directed |
| 21 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping). |
| 22 | S&F form work to edges of concrete flats, breaks in floors, opening in concrete walls , floors and roofs and sides of RCC/PCC bands in walls etc. complete all as specified and directed |
| 23 | M&L for 10 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, all as specified. |
| 24 | Rendering 15 mm thick in two layers in(10 mm+5mm) cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth using integral water proofing compound complete all as specified .(WPC shall be measured and paid seperately) complete all as specified and directed |
| 25 | Supply only integral water proofing compound. |
| 26 | M&L for preparing newly plastered surfaces on wall and applying three coats of white wash complete all as specified and directed |
| 27 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed. |
| 28 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed |
| 29 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed |
| 30 | Framed work as in doors or gates, cooler stand of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing of Fe-290(Gde E-165) complete |
| 31 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed all as specified and as directed |
| 32 | M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 33 | S&F Butt hinges,extruted aluminium alloy with galvanised mild steel type C21of size 100 mm. |
| 34 | S&F Aluminium anodised barrel tower bolt of extruded section 150mm size |
| 35 | S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 250mm long. |
| 36 | S&F Extructed aluminium alloy handles, fabricated type,anodised of size 150mm. |
| 37 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry ,making uniform 5 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles, laid over including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in CM 1:4, complete all as specified and directed |
| 38 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)as in vertical surface area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry ,making uniform 5 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles, laid over including screed bed or bedding layer of mortar 10 mm thick for laying floor tiles in CM 1:3, complete all as specified and directed |
| 39 | S&F 15 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed |
| 40 | S&F 20 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed |
| 41 | S&F vitreous china wash down water closet pan (pedestal pattern), white, including fixing bolt, plastic water closet seat cover, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminium hinging device. |
| 42 | S&F for 10 ltr capacity PVC valveless, syphonic action type,twin/dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes and incl 32mm dia pipe for low level cistern flush pipe, complete all as specified and directed |
| 43 | S&F wash hand basin, white Ovel Size size 550 x 400mm including 32mm brass chromium plated waste fittings, waste pipe, PVC connection 600mm long, waste pipe 32 mm dia, pillar tap brackets, including cutting for and pinning in ends of brackets or erecting stand etc. complete all as specified and directed. |
| 44 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. complete all as specified and directed |
| 45 | S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 46 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimumweight 60gms) |
| 47 | S&F 15 mm bore dia pipe, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed |
| 48 | S&F 15 mm bore bib taps fancy type cast copper alloy cromium plated screwed down, screwed for iron pipe or for brass ferrule. |
| 49 | S&F 15mm size PVC connections with brass nuts of length 600mm, complete all as specified and directed |
| 50 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified. |
| 51 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 52 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 53 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 54 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 55 | S&F 110mm PVC (SWR) WC connector with lip ring,complete all as specified and directed |
| 56 | S&F PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 57 | S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 58 | S&F PVC (SWR) bends any radius for 75 mm bore fitted with oval access doors complete all as specified and directed |
| 59 | S&F PVC (SWR) bends any radius for 110 mm bore fitted with oval access doors complete all as specified and directed |
| 60 | S&F PVC (SWR) vent cowl for 75 mm bore pipe, complete all as specified and directed |
| 61 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore plastic ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) all as specified and directed. |
| 62 | S&F Steel windows or ventilators, fixed type, with glazing bars |
| 63 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed |
| 64 | S&F 3 mm thick figured glass/ pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed |
| 65 | S&F glavanised mild steel wire cloth. 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed |
| 66 | Excavating in trenches not exc 1.5 m wide and not exc 1.5 m in depth for manholes, sewage line etc not exc 10 sqm on plan and getting out in any type of soil. |
| 67 | Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 68 | Removing excavated material (soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point. |
| 69 | PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregates as in foundations, filling and mass concrete. |
| 70 | Concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregates. |
| 71 | 150 mm bore salt-glazed stoneware drain pipes, grade \\"A\\" laid in trenches and jointed as specified. |
| 72 | Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius and built in CM 1:4. |
| 73 | PCC 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in copings, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 74 | 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement. |
| 75 | Providing precast cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in cover slabs for manholes etc, set in cements mortar 1:6 . |
| 76 | TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. |
| 77 | Supply and Fixing of Kirloskar 3 HP Three Phase MonoBlock Pump - KDI-318++ CI MS SS IP55 FCL completed all as specified and as directed. |
| 78 | Supplying, laying & jointing in replacement submersible cable flat type, copper conductor of size 4 Sqmm 3 core complete all as specified & as directed by Engineer –in-charge. |
| 79 | Supply and fixing of LED light 12 V DC 10 W Warm white underwater light including led driver and necessary AC & DC cable complete all as specified and as directed. |
| 80 | Supply, installation and fixing of 2 HP CRI pump model css 14 Open well submersible pump (silver) Single phase, 200-240 V, CSCR, Three phase 380-450 V complete all as specified and as directed |
| 81 | Supply, installation and fixing of trolly for 2 HP open well pump complete all as specified and as directed. |
| 82 | Supply and fixing of suction pipe size 40 mm flexible hose complete all as specified and directed. |
| 83 | M&L for taking down cement or cement lime plaster any description incl racking out joints, hacking for key, scrubbing down with water etc including removal of debris from the MOD land complete all as specified and directed. |
| 84 | M&L for 15 mm thick rendering on block masonry or concrete surfaces in CM 1:6 on internal walls at any height, finished even and smooth without using extra cement and all as specified. |
| 85 | M&L for 10 mm thick rendering on ceiling surfaces in CM 1:3 on finished even and smooth without using extra cement and all as specified. |
| 86 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted including removing existing nails, if any, any Nos and filling the disturbed surface/holes making smooth surface as directed. |
| 87 | M&L for preparation of new surface of ceiling and applying two coat of applying two coats of oil emulsion distemper white or tinted over a coat of primer complete all as specified and directed |
| 88 | Demolition of stone masonry built in cement mortar of any description and in any position not otherwise specifically provided for all as specified. |
| 89 | M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed. |
| 90 | M&L for PCC block masonry type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 with solid blocks, exc 10 cm in width and setting in mortar complete all as specified and directed. |
| 91 | M&L for 15 mm thick rendering on block masonry or concrete surfaces in CM 1:6 on internal walls at any height, finished even and smooth without using extra cement and all as specified. |
| 92 | Taking down chowkhats or frame of any description n.exc 1.5 Sqm each with shutters without taking off shutters from the frame |
| 93 | S&F powder coated aluminum frame/guiding rail for sliding or side hung window/ventilators and for sliding shutters with one or more rebates incl jointing cleats for fixing etc complete all as specified. |
| 94 | S&F rubber gasket for fixing of glass into window/ventilator shutters complete all as specified and directed. |
| 95 | S&F 5.50mm thich sheet glass (frosted) ordinary quality in square exc 0.50 sqm each fixed with aluminium framework complete all as specified and directed. |
| 96 | S&F aluminium composite panel (ACP) sheet 6mm thick fixed with frame made out electric residence welded MS (Mild steel) tube size 38mm x 38 mm x 16 SWG. The grid size shall not exc 600 mm x 600mm. The frame shall be painted with 02 coats of synthetic enamel paint with primer. The ACP 6mm sheet fixed with SS screws and jointed shall be finished with silicon, completed all as specified and directed by Engineer-in-charge (Note: Work involved upto roof slab, including scaffolding in the unit rate) |
| 97 | S&F toughened (tempered) glass 12mm thick frosted type shutter, machine polished edges, SS 304/patch fittings alongwith hydraulic floor spring (heavy duty), top & bottom pivot, SS/ designer glass door handle, door lock, rubber gasket & sealant complete all as specified and directed by engineer-in-charge. |
| 98 | Taking down Shutters of any description exc 1 sqm and n exc 2 sqm each and removing from site. |
| 99 | M&L for squared rubble walling, Jodhpur type, brought up to courses, well bonded, bedded and solidly hearted, built in CM 1:4 |
| 100 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge n.exc 20mm and dressing face beds and joints as specified to squared rubble walling Jodhpur type, brought upto courses. |
| 101 | M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified |
| 102 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer chalk whiting over complete all as specified & as directed. |
| 103 | M&L for Fibrette Tile made of 'Wood fiber Cement Composite' 1mm width wood fiber 15mm thick size 595x595/ 595X1195 mm having excellent noise absorption of 1 NRC as per ISO: 354, Density 400 Kg/ m3, meets Fire Ratings as per BS 476 Part 5, 6 and 7 class 1 and P, water resistant and thermal insulated. Installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results. |
| 104 | M & L for Acoustic Door of 56 mm achieving sound reduction of upto 50 STC. Double layers of 8mm water proof Acoustic Ply with Dampner Sheet and double layer of 10mm compressed insulation and Single layer of Sound Dampner 1218x1218 mm x 12mm made of 10 mm compressed wood Fiber cement composites 1250Kg/m3 and 2mm dampner sheet having 37 STC as per ISO 140 (partIII) - 1995). Door frame will be made of teak wood (Sudan Teak). Three side frame and drop seal below will be provided along with the door with high load bearing |
| 105 | M & L for 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 106 | S&F Butt hinges, extruted aluminium alloy with galvanised mild steel type B -21of size 125 mm for Acoustic Door of 56 mm |
| 107 | S&F 300 mm long aluminium alloy anodized silding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or casr aluminium alloy. |
| 108 | S&F for Powder coated galvanised iron snap grid frame work of size 605 x 605 mm for false ceiling comprising of Main Tee 24 x 38 x 0.70mm (double stiching) Cross Tee 24 x 26 x 0.70mm (double stiching) and Wall Angle 24 x 24 x 0.80mm suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4 mm thick non asbestos designer ceiling boards complete all as specified. |
| 109 | M & L Venetion blinds carpet type foldable complete all as specifed |
| 110 | M&L for door bottom sealing strip self adhesive made of silicon 50mm wide complete all as specifed |
| 111 | Supply and fixing in replacement on wall, installation, testing & commissioning in replacemet of hi wall 1.5 ton split units BEE 5 star rated indoor /outdoor (evaporator and condensor shall be of copper), copper tubing of required size for proper installation and outdoor unit ncluding wall / floor mounted stand complete with cordless remote control unit and with capacity 1.5 TR 230 Volt AC complete all as specified and as directed by Engineer in charge Please Enable Macros to View BoQ information |
