|
| 1 | ALMIRAH LARGE STEEL WITH SHELVES, ALMIRAH STEEL ( FD-1031 & 1033) |
| 2 | Removing UNSV shelves from almirah Large steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts & bolts complete all as specified and directed |
| 3 | Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern , with duplicate and key & hole cover and all as specified and directed .Make:Bajarang/Link/liko/harrison |
| 4 | Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed. Make:Godrej/Link/or Equivalent |
| 5 | M & L for denting & painting of Almirah large steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed .Make:Asian Paint/Jonson & Jonson/Shalimar |
| 6 | ALMIRAH MEDIUM STEEL W/SHELVES : FD-1032 |
| 7 | Removing UNSV shelves from almirah Medium steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts bolts complete all as specified and directed. |
| 8 | Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern , with duplicate and key & hole cover and all as specified and directed. Make:Godrej/Link/or Equivalent |
| 9 | Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed.Make:Godrej/Link/or Equivalent |
| 10 | M & L for denting & painting of Almirah Medium steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed.Make:Asian Paint/Jonson & Jonson/Shalimar |
| 11 | LOCKER BED SIDE STEEL |
| 12 | M & L for denting & painting of locker bed steel both internally and externally with synthetic enamled paint of silver/grey colour with spray gun after properly smoothiening the steel surface with the help of sand paper/electric grinder applying putty on dents and providing a coat coat of complete all as specified and directed. |
| 13 | Removing UNSV & S&F hasp & staples 75mm long as per drg complete all as specified and directed. |
| 14 | Locker Flying Kit Steel/Locker Cabinet Steel |
| 15 | M&L including denting for one coat of synthetic enamal paint OG/Gray to internal /external surface & shelves completely after preparation of old painted surfaces by applying sand paper and filling with putty where ever required to Rack steel all as specified & directed by Engineer-in-charge. |
| 16 | Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern with duplicate key all as specified and directed by Engr -in- Charge. |
| 17 | Removing UNSV & S&F MS steel CP handles 100mm as per drg complete all as specified and directed |
| 18 | M & L for welding to the any place of of existing locker wherever required with suitable welding rod all as specified and directed by Engr-in-Charge. |
| 19 | Chair Varandah :-FD/E6/MAP-II/06 |
| 20 | M & L for removing old unsv plastic sheet seat & back of Chair Varandah and S & F new seat and back best quality plastic sheet of approved, required welding work for broken frame and S & F 2 nos of 10mm iron rod for supporting for bottom of chair varandah equal distance and redusting and applying two coat of synthetic enamel paint black colour over a coat of red oxide primer of approved make and providing suitable hard rubber shoes 4 Nos approved quality for each chair and all as specified and as directed by Engr-in-charge. |
| 21 | Bed Hard (MAP) (FD/E6/MAP/08)® |
| 22 | M & L for removing old unserviceable Ply wood top from Bed hard (MAP) and S & F new plywood top 12mm thick ISI mark of size 1900x850mm with suitable nut & bolt and all as specified and directed by Engr-in-Charge. |
| 23 | M&L for removing old unserviceable particle board from head board of Bed hard (MAP) and S&F new 18mm thick boath side laminated particle board exterior grade of size 640x200mm for head board fixing with suitable steel screw and all as specified and directed by Engr-in-Charge. |
| 24 | M&L for removing old unserviceable particle board from foot board of Bed hard (MAP) and S&F new 18mm thick boath side laminated particle board exterior grade of 640x310mm for foot board fixing with suitable steel screw and all as specified and directed by Engr-in-Charge. |
| 25 | M &L for preparation of steel surfaces by emery papers to Bed Hard (MAP) and applying one coat of synthetic enamel paint black colour apporved make and all as specified and as directed by Engr-in-Charge. |
| 26 | M & L for welding to the broken long rail stiffiner and leg stiffiner existing Bed Hard (MAP) with suitable welding rod all as specified and directed by Engr-in-Charge. |
| 27 | Repair Chair Computer , Chair Revolving Low/Med Back, Chair Revolving With & Without Drg - ( Trade Pattern) |
| 28 | Removing UNSV/torn out and S & F new seat & back made out of 12mm thick hot pressed plywood duly upholstered with fabric/rexin/leathertte as existing on chair & moulded polyurethane foam and the back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50mm thick for back alongwith the fabric of approved quality & colour complete all as specified and directed . |
| 29 | Removing UNSV & S & F castor wheels heavy duty as per the approved sample complete all as specified and directed by Engr-in-Charge. |
| 30 | Removing UNSV & S & F new handrest matching with existing all in shape,size,material & quality complete all as specified and directed. . |
| 31 | Removing UNSV Hydrolic lifter and S &F new hydrolic lifter mechanism for making the seat adjustment functional.complete all as specified and directed. |
| 32 | Chair dining : (SS) (TP) |
| 33 | Removing UNSV & S & F new seat made out of 12mm thick hot pressed plywood duly upholstered with fabric & moulded polyurethane foam. The cushions shall be of 40 density, 30mm thick for seat alongwith the fabric of approved quality & colour complete all as specified and directed. |
| 34 | S&F Hard rubber toes of superior quality as specified and as directed by Engr-in-charge. |
| 35 | M & L for preparation of old surface with removing and scrubbing rust part and applying spray paint of matching exixting colour, all as directed by Engr-in-charge. |
| 36 | Chair writiing, chair visitors : (FD/E6/MAP/12, DELITE HI-TECH & GODREJ & GEEKEN) (TP) |
| 37 | Removing UNSV & S & F new seat & back made out of 12mm thick hot pressed plywood duly upholstered with fabric & moulded polyurethane foam and the back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 50mm thick for seat & 50mm thick for back alongwith the fabric of approved quality & colour complete all as specified and directed. |
| 38 | Removing UNSV & S & F new handrest matching with existing all in shape,size,material & quality complete all as specified and directed. . |
| 39 | Chair CB Steel with Arms : FD-75(M) |
| 40 | M & L for removing unserviceable seat from chair CB steel with arms and S & F new seat made out of 2nd class hard wood and canned with 2mm to 2.50mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.6mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16\\"X3\\" long with two washers on either side of the seat, and all as specified and as directed. |
| 41 | M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of 2nd class hard wood and canned with 2mm to 2.5mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.6mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16\\"X3\\" long with two washers on either side of the back, and all as specified and as directed. |
| 42 | M & L for removing unserviceable/broken arms from chair CB steel with arms and S & F new arms made out of first class teak wood and handle shall be black polished and fixed to the chairs CB steel with arms with suitable wooden screws, and all as specified and as directed . |
| 43 | M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green/smoke gray shade approved quality over a coat of red oxide primer and all as shown on Drg. |
| 44 | CHAIR VARANDAH :-FD-256/259/359 |
| 45 | M & L for removing broken/ unserviceable cane from both seat & back of Chair Varandah and Recanning the same with best quality plastic cane 5mm wide and 0.60 mm thick of approved make after cleaning throughly all the surfaces of chair including required welding work for broken frame whereever required and redusting and applying two coat of synthetic enamel paint white colour over a coat of red oxide primer of approved make and providing suitable hard rubber shoes 4 Nos approved quality for each chair and all as specified and as directed. |
| 46 | Chair School with Hand Board (FD/E6/MAP/05) |
| 47 | M & L for removing old broken PVC Seat & Back (one piece) from Chair School with Hand baord and S & F new PVC Seat & Back (one piece) all as specified and directed by Engr-in-Charge. |
| 48 | M & L for removing old unserviceable Hand board from chair school with hand board and S & F new hand board made with 18mm thick pre laminated particle board with 6mm thich teak wood edging all around including two coats french polishing fixed with suitable screws and all as specified and directed by Engr-in-Charge. |
| 49 | M & L for welding work to broken frame wherever required and redusting and applying two coats of synthetic enamel paint black colour of approved make and providing suitable hard rubber shoes 4 Nos approved quality for each chair and all specified and directed by the Engr-in-Charge. |
| 50 | TABLE 3'X2' (900 X 600 X 760MM) With/ Without Drawer (FD-1007/1008) |
| 51 | Removing old u/s tops from Table steel 900x600x760mm and S&F new top made out of 18mm thick pre-laminated particle board with teak wood beading all around, all as specified in drg & as directed by Engr-in-charge. |
| 52 | M&L for one coat of synthetic enamal paint OG to steel surface to Table steel 900x600x760mm after preparation ofold painted surfaces by applying sand paper and filling with putty where ever required all as specified & directed by Engineer-in-charge. |
| 53 | Removing UNSV & S&F best quality Rubber shoes to legs complete all as specified and directed by Engineer-in-Charge. |
| 54 | Repair of Rack steel Adjustable 6 Tier/shelves /open type (1905 X915X610 mm) |
| 55 | M&L for one coat of synthetic enamal paint OG/Gray to internal /external surface & shelves completely after preparation of old painted surfaces by applying sand paper and filling with putty where ever required to Rack steel all as specified & directed by Engineer-in-charge. |
| 56 | Removing of old/ unsv shelves from Rack steel and S&F new shelves made out of 1mm thick MS sheet bent to shape required all as specified in drg & directed by Engr-in-charge. |
| 57 | Teapoy Varandah |
| 58 | Replacement of legs of Teapoy Verandah and applying two coat of synthetic enamel paint white colour over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 59 | S & F the Top of the Teapoy Varandah made out of 19mm thick Prelaminated Particle board, rest all as shown on drg and as directed by Engr-in-Charge. |
| 60 | M & L for spot welding of broken joints 25mm to 75mm of Teapoy varandah including preparation of surface and appluing two coat of white synthetic enamel paint over a coat of red oxide primer complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 61 | Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 62 | Table Steel 900mm x 900mm x 760mm |
| 63 | S & F Top of the Table Steel 900mm x 900mm x 760mm made out of 19mm thick Prelaminated Particle board, rest all as shown on drg and as directed by Engr-in-Charge. |
| 64 | S&F Hard rubber toes of superior quality as specified and as directed by Engr-in-charge. |
| 65 | Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey/OG over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge. |
| 66 | TABLE OFFICE OFFICER STEEL : FD-1003 & FD-84 |
| 67 | Removing UNSV top & S&F new top made out of prelaminated particle board 18mm thick exterior gde (Centuryply/Action Tesa/Bhutan Board) as approved shade and 6mm thick first class teakwood edging fixed with all around the top & edging polishing with matching the colour of top complete all as specified and directed by Engr-in-Charge. |
| 68 | Removing UNSV locks from & S & F new 6 levers locks, Godrej pattern, with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge. |
| 69 | M & L for denting & painting of Table office clk steel to external surfaces and drawer & drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 70 | Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified and directed by Engineer-in-Charge. |
| 71 | TABLE OFFICE CLERK STEEL : FD-1004 & FD-84 |
| 72 | Removing UNSV top & S&F new top made out of prelaminated particle board 18mm thick exterior gde as approved shade and 6mm thick first class teakwood edging fixed with all around the top & edging polishing with matching the colour of top complete all as specified and directed. |
| 73 | Removing UNSV locks from & S & F new 6 levers locks, Godrej pattern, with duplicate and key & hole cover and all as specified and directed. |
| 74 | M & L for denting & painting of Table office clk steel to external surfaces and drawer & drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed.Make:Asian Paint/Jonson & Jonson/Shalimar |
| 75 | Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified and directed. |
| 76 | Table Computer FD/E6/MAP/03 & TP Removing of old unserviceable the following parts from table computer and supply and fix new following parts and fixing in same position all as shown on drg and as directed by Engineer-in-charge |
| 77 | Removing of unserviceable top from table computer and supply and fix new top of 18 mm thick prelaminated particle board exterior grade one side teak shade other side white in colour including 4 mm thick of teak wood beading around the top duly fixing in position including polishing after repair wok all as shown on drg and as directed |
| 78 | M&L for removing old u/s sides of Table computer and S&F new sides of same size and pattern made out of prelaminated particle board exterior grade complete all as specified & shown in drg and as directed. |
| 79 | M&L for removing old u/s drawer of Table computer and S&F new drawer of same size and pattern made out of prelaminated particle board exterior grade with telescopic channel complete all as specified & shown in drg and as directed. |
| 80 | M&L for removing old u/s key board of Table computer and S&F new key board of same size and pattern made out of prelaminated particle board exterior grade with telescopic channel complete all as specified & shown in drg and as directed. |
| 81 | Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified and directed. |
| 82 | REPAIR OF CHARPOY GI PIPE FD-220 |
| 83 | Removing old unserviceable Ply from charpoy GI pipe and S & F 12mm thick BWR Gde plywood commercial type of size 1980x900mm to charpoy GI pipe frame by providing 03 Nos of flat Iron at equal distance size 40mm wide X 6mm thick and length shall be provided by existing charpoy GI and flat Iron shall be fixedt tightly to Chapoy GI with the help of suitable nut,bolt & washer of size 62-65 mm & 6 mm dia by drilling holes into GI Pipe alongwith any welding if required . The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 Nos on each long rail, 2 Nos on each Short rail & 2 nos on each iron flat) & fixing with nut bolt along with suitable washers of size 62-65mm and 6mm thick and all as specified and directed by |
| 84 | M&L for removing unserviceable three way elbow 32 mm dia and S & F new three way elbow 32 mm dia medium grade (ISI marked) and all as shown on drg. |
| 85 | M&L for removing the threadless/broken long rails from charpoy GI Pipe 32 mm dia and supply and fix new long rail made of 32 mm dia GI Pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three way elbow 32 mm dia and all as shown on drg.Make:-Prakesh Surya/Jindal/Tata |
| 86 | Removing of old damaged/broken long rail from Charpoy GI 32mm dia and making of short rail from u/s long rail retreived from Ser No 03 above including threading on both ends & fixing in charpoy GI pipe all as specified and shown on drg. |
| 87 | Removing of old damaged/broken Short rail from Charpoy GI 32mm dia and making of leg from /s short rail retreived from Ser No 04 above including threading & Supply & Fixing 3mm thick MS plate 50mm dia in bottom to be welded with legs & fixing in charpoy GI pipe all as specified and shown on drg and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
