|
| 1 | M & L for non- skid ceremic light/coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 300mm x 300 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including dismantling of tiles and including M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 2 | M & L for non- skid ceremic light/coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile 400mm x 400 mm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including dismantling of tiles and including M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 3 | M&L for glazed (coloured) ceramic tiles wall 200mmx300mmx7mm thick on vertical faces of walls including M&L for 10mm thick rendering in CM (1:4) set jointed in neat cement slurry and pointed in coloured cement to match over and including taking down old dado/skirting complete all as specified and directed. |
| 4 | M&L for glazed (coloured) ceramic tiles wall 300mm x 450mm x7mm thick on vertical faces of walls including M&L for 10mm thick rendering in CM (1:4) set jointed in neat cement slurry and pointed in coloured cement to match over and including taking down old dado/skirting complete all as specified and directed. |
| 5 | M&L for glazed (coloured) ceramic tiles wall 300mm x 600mm x7mm thick on vertical faces of walls including M&L for 10mm thick rendering in CM (1:4) set jointed in neat cement slurry and pointed in coloured cement to match over and including taking down old dado/skirting complete all as specified and directed. |
| 6 | M&L for vitrified ceramic tiles light shade 8 -10 mm thick (square/rectangular) polished, area of each tiles 600mm x 600 mm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and including M&L for 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and screed bed / rendering and hearthing complete all as specified and directed. |
| 7 | All as per serial item no 6 as above but as in vertical surfaces including dismantling of tiles and screed bed / rendering and including M&L for rendering 10 mm thick in cement mortar (1:4), as in backing layer complete all as specified and directed. |
| 8 | M&L for Vetrified tiles light shade 8 to 10 mm thick (square) polished, size of each tiles 600mm x 1200 mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and including M&L for screeding 15mm thick in CM 1:6, including dismantling of floor tiles and screed bed/ rendering and hearting complete all as specified and directed |
| 9 | All as per serial item no 8 as above but as in vertical surfaces including dismantling of tiles and screed bed / rendering and including M&L for rendering 10 mm thick in cement mortar (1:4), as in backing layer complete all as specified and directed. |
| 10 | M & L for 20-25 mm thick machine cut pre polished kota stone slab flooring laid under stairs soffit area and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and including M&L for 15 mm thick bedding layer of cement mortar (1:6) for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 11 | M&L for 20-25 mm thick machine cut pre polished kota stone slab in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration using as front door steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing and including M&L for10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as specified and directed. |
| 12 | M & L for 40 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in floors finished even and smooth with out using extra cment complete all as specified and ditected. |
| 13 | M&L Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM (1:4), mixed with liquid water proofing compound @ 200ml per 50 kg of cement, trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carrying out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating per sqm in each coat with roller application complete all as specified and directed.. (Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.) |
| 14 | Supply only liquid water proofing compond |
| 15 | M&L for cement concrete type E2 (1:5:10) (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed. |
| 16 | S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed. |
| 17 | M&L for PCC (1:2:4) Type B0 using 12.5 mm graded stone aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc complete all as specified and directed. |
| 18 | M&L for 15 mm thick rendering on fair faces of concrete roof surfaces in CM (1:4) with water proofing compound at the rate of 200 ml per 50 kg bag of cement concrete surface complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly) |
| 19 | S&F for 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including cutting chases for concealed water tubing and making good, cutting exceeding 20cm girth where requiired inclufing taking down complete all as specified or as directed. |
| 20 | S&F for 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including cutting chases for concealed water tubing and making good, cutting exceeding 20cm girth where requiired including taking down complete all as specified or as directed. |
| 21 | S & F in repairs vetrious china wash down water closet (pedestal pattern) white compete, including connectiong drain pipe and to flush pipe anti syphonage pipe etc complete all as specified and directed. |
| 22 | S & F in repiars plastic water closet cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinges device complete all as specified and directed. |
| 23 | S & F in repairs vitreous china squatting pan 'Orissa pattern' size 580mm x 440mm white with integral foot rest including replacement of 'P' or 'S' trap lime concrete bedding and making good floors complete all as specified and directed. |
| 24 | S & F in repairs for PVC low level flushing cistern 10 litres capacity, syphonic action type, white, as approved including ball valve float valve and handle, flush pipe as in repair complete all as specified and directed. |
| 25 | S & F in repairs for vitreous china, wash hand basin white size 550mm x 400 mm including brackets, chromium plated waste coupling & PVC waste pipe of 32mm dia complete all as specified and directed. |
| 26 | S & F for 15 mm dia pillar taps standard of PTMT fancy type any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 27 | S & F in repairs for cetre hole basin mixer 15 mm dia chromium plated complete all as specified and directed, |
| 28 | S&F in repair fancy type chromium plated brass stop valve/ angle valve type suitable for 15mm bore pipe with cast copper alloy screw down, high pressure, screwed both ends for iron pipe or for unions 15 mm bore pipe complete all as specified and directed. |
| 29 | S&F in repair 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed.Model : Cera model No F1014151, Hindware cat part No F440003CP Kerovit Cat Part No KB 2111004, Asian Paints Cat Part No MABC101. |
| 30 | S&F in repair 15 mm bore fancy type chromium plated brass pillar tap suitable for 15mm bore pipe with cast copper alloy screw down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 31 | S & F in repair fancy type 100mm size brass CP shower rose for fixing 15 mm pipe with or without swivel joints with 45 degree bend with flange complete all as specified and as directed. |
| 32 | S & F in repairs chromium plated wall mixture with connection for shower arrangement complete all as specified and directed. |
| 33 | S & F in repairs Brass CP Hand Shower (health faucet) I mtr PVC tube with wall hook complete for EWC complete all as specified and directed. |
| 34 | S & F in repairs PVC connections 15 mm dia & 450 mm long with PTMT nuts complete all as specified and directed. |
| 35 | S & F in repairs for 15 mm dia fancy type bib tap of PTMT standard any colour high pressure screwed for iron pipe and fixed |
| 36 | S & F in repairs for PVC waste pipe of 32 mm dia for WHB and Kitchen sink etc complete all as specifed and sirected. |
| 37 | Demolition/ dismantling of breaking up drain pipes , AC or reinforced concrete and set in cement mortarfor 110 mm dia of pipe complete all as specified and directed. |
| 38 | S&F P V C (SWR) pipes of 110 mm bore single socketed in any length fixed to wall all as specified and directed. |
| 39 | S&F P V C (SWR) pipes of 75 mm bore single socketed in any length fixed to wall all as specified and directed. |
| 40 | S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cenment all as specified and directed. |
| 41 | S&F PVC (SWR) bends any radius 75mm bore provided with or without access door all as specified and directed. |
| 42 | S&F PVC (SWR) bends any radius 110mm bore provided with or without access door all as specified and directed. |
| 43 | S&F 110mm bore PVC (SWR) vent cowl |
| 44 | S&F PVC (SWR) junction single, (Single T) equal or un equal 110 mm bore of any radius with access door all as specified and directed. |
| 45 | S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed |
| 46 | S&F rotational moulded polythene water storage tanks tripple layer white in colour(cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed |
| 47 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high dessity plastic ball screwed for iron pipe and fixed ( minimum weight 455 gms) all as specified and as directed. |
| 48 | S&F in repairs for 15 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed. |
| 49 | S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 50 | Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed. |
| 51 | Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 Sqm each and not exc. 4.00 Sqm including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed. |
| 52 | Taking down of shutters any description exc 1.00 sqm and n. exc 2.00 Sqm each incl removing from th epremises complete all as specified and directed. |
| 53 | S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and as directed by Engineer-in-Charge. |
| 54 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge. |
| 55 | S&F for 105mmx60 mmx 1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete all as spd and directed. |
| 56 | S&F for 125mmx60mmx1.25 mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specified and directed. |
| 57 | S & F 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, complete including treating theback of chowkats with coal tar black paint. |
| 58 | S&F for 30 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed. |
| 59 | M & L for 35mm thick glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed. Note:- Campsule Mess will be measured and paid separately. Please Enable Macros to View BoQ information |
| 60 | M & L for 35mm thick glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed. Note:- Campsule Mess will be measured and paid separately. Please Enable Macros to View BoQ information |
