Tender For Repairing And Painting To Various Steel Furniture And Charpoy At Af Stn Sirsa
Tender Value
20 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
3 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sirsa → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Painting To Various Steel Furniture And Charpoy At Af Stn Sirsa
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Jul-2026 |
| 2 | 09-Jul-2026 | DATE CORRIGENDUM | Date | 15-Jul-2026 |
| 3 | 09-Jul-2026 | REVISED SCHEDULE OF CREDIT | Other | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | GI CHARPOY (Drawing No. FD-220) |
| 2 | S&F for LONG RAIL made of 32 mm bore (medium grade) galvanised iron pipe, cut to required length duly threaded at both ends and fitted incl taking out the existing unserviceable long rail complete all as specified and directed. |
| 3 | Labour only for fabricating SHORT RAIL, made out of retrieved GI Pipe 32mm bore (dia) LONG RAIL, cut to required length duly threaded one end and fitted including removing damaged short rail complete all as specified and as directed. |
| 4 | Labour only for fabricating LEG, made out of retrieved GI Pipe 32mm bore (dia) LONG RAIL & SHORT RAIL, cut to required length duly threaded one end and fitted with and including 3 mm thick mild steel plate, welded to bottom of legs, projecting 5 mm peripherially outer dia of leg including removing damaged Leg from 3-Way Elbow by unscrewing complete all as specified and as directed. |
| 5 | -ditto- as per Item No 1.03 above but legs without 3 mm thick welded square MS plate at bottom |
| 6 | S&F 32 mm bore medium grade galvanised iron pipe measured in running metre for fabrication of short rails and/or legs of GI charpoy only where serviceable retrieved material obtained from dismantled charpoys is found insufficient, including cutting, threading and use as directed by Engineer-in-Charge complete all as specified and as directed.NOTE: This item shall be operated strictly as a secondary contingency item and shall be measured only to the extent certified by Engineer-in-Charge that serviceable retrieved material is not available for fabrication under Items 1.02 to 1.04. No claim shall be admissible where fabrication is carried out using retrieved material. |
| 7 | S&F PVC hard rubber shoes, of approved quality, fixed at bottom of legs complete all as specified and as directed. |
| 8 | S&F GI ELBOW, 3-Way (weight not less than 220 Gram), ISI Marked for GI Pipe 32mm bore (dia) and re-assembling including taking out damaged GI Elbow from Rails & Legs complete all as specified and as directed. |
| 9 | S&F GI CHECK NUT 32mm bore (dia), 6mm thick, ISI Marked including taking out damaged GI Check Nut, complete all as specified and as directed. |
| 10 | S&F PLYWOOD TOP, 12mm thick 1980mm x 900mm in size, 7 Ply, BWR Gde Commercial, ISI Marked and securing with 6mm dia round head counter sunk bolts and nuts with stainless steel washers (08 Nos) as per existing shape and size including taking out damaged Plywood Top, complete all as specified and as directed. |
| 11 | S&F PLYWOOD TOP 1800mm x 900mm in size, 12mm thick for CHARPOY JCOs/ORs (Drawing No. CEAF/STD/168/06), 7 Ply, BWR Gde, Commercial, ISI Marked and securing with 6mm dia round head counter sunk bolts and nuts with stainless steel washers (08 Nos) as per existing shape and size including taking out damaged Plywood Top, complete all as specified and as directed. |
| 12 | M&L removing denting and making good Bends (if any), preparing old painted/treated both Internal & External Surfaces except Top by removing loose Paints and providing Putty and Primer where required to obtain a Smooth surface, applying a coat of Synthetic Enamel Paint (OG Colour) with Spray Painting Machine, complete all as specified and as directed. |
| 13 | ALMIRAH LARGE STEEL (Drawing No. FD-1031) |
| 14 | M&L in repairs to 1.0 mm thick M.S. sheet shutters including straightening, cutting out damaged portions, welding patches where required, grinding and making good complete all as specified and as directed. |
| 15 | M&L in repairs to 1.0 mm thick M.S. sheet shelves including cutting, bending, welding, strengthening and fixing complete all as specified and as directed. |
| 16 | M&L in repairs to 1.0 mm thick M.S. sheet back including welding patches, strengthening and making good complete all as specified and as directed. |
| 17 | M&L in repairs to M.S. channel base/frame including straightening, welding, strengthening and fixing complete all as specified and as directed. |
| 18 | S&F Mild Steel HANDLE, 100mm long, Chromium plated, of approved quality, for almirah shutter including Taking down/out existing handle complete all as specified and as directed. |
| 19 | S&F almirah lock of approved quality complete with three keys including taking out defective lock and fixing in position complete all as specified and as directed. |
| 20 | S&F steel hinges 75 mm long including replacement and fixing complete all as specified and as directed. |
| 21 | M&L in repairs to shelf supporting clips/brackets including replacement where required and fixing complete all as specified and as directed. |
| 22 | M&L in repairs to locking device with cover including locking rods, hooks, guide brackets, catches and other connected fittings by straightening, welding, fabrication of minor components, adjustment and refixing complete all as specified and as directed.(NOTE: Painting to locking device and associated fittings shall be carried out under the relevant painting item of the schedule.) |
| 23 | M&L for removing dents and making good bends (if any), preparing old painted steel surfaces internally and externally by removing rust, loose paint and other foreign matter, applying stopper/putty where required to obtain a smooth and even surface, applying one coat red oxide zinc chromate primer and two coats synthetic enamel paint of approved shade/colour by spray painting machine complete all as specified and as directed. |
| 24 | M&L for making Almirah Large Steel fully serviceable by minor adjustments to shutters, shelves, locking arrangement and fittings including lubrication, tightening of screws, alignment correction and making good minor defects complete all as specified and as directed.NOTE: This item shall be applicable only where no repair/replacement work under Items 2.01 to 2.11 has been carried out and shall not be measured or paid in conjunction with any other repair item of this schedule. |
| 25 | ALMIRAH MEDIUM STEEL (Drawing No. FD-1032) |
| 26 | M&L in repairs to 1.0 mm thick M.S. sheet shutters including straightening, cutting out damaged portions, welding patches where required, grinding and making good complete all as specified and as directed. |
| 27 | M&L in repairs to 1.0 mm thick M.S. sheet shelves including cutting, bending, welding, strengthening and fixing complete all as specified and as directed. |
| 28 | M&L in repairs to 1.0 mm thick M.S. sheet back including welding patches, strengthening and making good complete all as specified and as directed. |
| 29 | M&L in repairs to M.S. channel base/frame including straightening, welding, strengthening, alignment correction and fixing complete all as specified and as directed. |
| 30 | S&F Mild Steel handle of size and pattern matching existing, chromium plated or powder coated as approved, for almirah shutter including taking out defective handle and fixing in position complete all as specified and as directed. |
| 31 | S&F almirah lock of approved quality complete with three keys including taking out defective lock and fixing in position complete all as specified and as directed. |
| 32 | S&F steel hinges 75 mm long including replacement and fixing complete all as specified and as directed. |
| 33 | M&L in repairs to shelf supporting clips/brackets including replacement where required and fixing complete all as specified and as directed. |
| 34 | M&L in repairs to locking device with cover including locking rods, hooks, guide brackets, catches and other connected fittings by straightening, welding, fabrication of minor components, adjustment and refixing complete all as specified and as directed.(NOTE: Painting to locking device and associated fittings shall be carried out under the painting item of this schedule.) |
| 35 | M&L for removing dents and making good bends (if any), preparing old painted steel surfaces internally and externally by removing rust, loose paint and other foreign matter, applying stopper/putty where required to obtain a smooth and even surface, applying one coat red oxide zinc chromate primer and two coats synthetic enamel paint of approved shade/colour by spray painting machine complete all as specified and as directed. |
| 36 | M&L for making Almirah Large Steel fully serviceable by minor adjustments to shutters, shelves, locking arrangement and fittings including lubrication, tightening of screws, alignment correction and making good minor defects complete all as specified and as directed.NOTE: This item shall be applicable only where no repair/replacement work under Items 3.01 to 3.11 has been carried out and shall not be measured or paid in conjunction with any other repair item of this schedule. |
| 37 | BOOK CASE FOUR DRAWERS (MAKE: GODREJ, Model No: SBC100XXXT) (TP ITEM) |
| 38 | S&F 8.0mm thick Glass of size 780mm x310mm duly grinded all around made to shape and size and Fixed-in-repairs, complete all as as specified and as directed. |
| 39 | RACK STEEL SIX TIERS (Drawing No FD-1038) |
| 40 | M&L removing denting and making good Bends (if any), preparing old painted/treated both Internal & External Surfaces by removing loose Paints and providing Putty and Primer where required to obtain a Smooth surface, applying a coat of Synthetic Enamel Paint (OG Colour) with Spray Painting Machine, complete all as specified and as directed. |
| 41 | CHAIR WRITING/ VISITORS (Drg No. FD/E6/MAP/12 & TP ITEM) |
| 42 | S&F arm made of approved material matching existing shape, size and pattern including removing defective arm, replacement of screws, nuts, bolts and other minor fittings as required, adjustment and fixing in position complete all as specified and as directed. |
| 43 | M&L in repairs to M.S. flat/seat frame including straightening, electric welding of cracks or broken portions, dismantling and reassembly as necessary, replacement of screws, nuts & bolts as required and making good complete all as specified and as directed. |
| 44 | M&L for preparing old steel surfaces including removal of rust, loose paint and other foreign matter, making good minor dents and bends (if any), applying one coat red oxide zinc chromate primer and two coats synthetic enamel paint by spray painting complete all as specified and as directed. |
| 45 | M&L for carrying out minor repairs to chair not covered under Items 6.01 to 6.03 including dismantling and reassembly, tightening of loose joints, replacement of screws, nuts, bolts and washers, adjustment, alignment correction and making good complete all as specified and as directed.NOTE: This item shall be applicable only where no repair/replacement work under Items 6.01 to 6.03 has been carried out and shall not be measured or paid in conjunction with any other item of this schedule. |
| 46 | CHAIR COMPUTER (TP ITEMS) |
| 47 | S&F arm of approved material matching existing shape, size and pattern including removing defective arm and fixing in position complete all as specified and as directed. |
| 48 | S&F caster wheel of approved type, size and quality matching existing including removing defective caster wheel and fixing in position complete all as specified and as directed. |
| 49 | S&F gas lift hydraulic mechanism of approved quality, capacity and size matching existing including removing defective gas lift hydraulic mechanism and fixing in position complete all as specified and as directed. |
| 50 | S&F operating lever of approved type and pattern matching existing including removing defective lever and fixing in position complete all as specified and as directed. |
| 51 | S&F pedestal base of approved quality and design consisting of five legs complete with twin wheel castors, matching existing size and pattern, including removing defective pedestal base and fixing in position complete all as specified and as directed. |
| 52 | CHAIR VERANDAH (Drawing No. FD-359) |
| 53 | S&F PVC HARD RUBBER SHOES (Set of 4 No.), of approved quality and fixed on Legs including Taking out/down damaged Rubber Shoes complete all as specified and as as directed. |
| 54 | M&L for preparing Old Painted Steel Frame including Legs and Mild Steel Bar and applying Synthetic Enamel Paint (White Colour), duly spray painted complete all as specified and as directed. |
| 55 | CHAIR REVOLVING LONG BACK / SHORT BACK (TP ITEMS) |
| 56 | S&F arm of approved material matching existing shape, size and pattern including removing defective arm and fixing in position complete all as specified and as directed. |
| 57 | S&F caster wheel of approved type, size and quality matching existing including removing defective caster wheel and fixing in position complete all as specified and as directed. |
| 58 | S&F gas lift hydraulic mechanism of approved quality, capacity and size matching existing including removing defective gas lift hydraulic mechanism and fixing in position complete all as specified and as directed. |
| 59 | S&F operating lever of approved type and pattern matching existing including removing defective lever and fixing in position complete all as specified and as directed. |
| 60 | S&F pedestal base of approved quality and design consisting of five legs complete with twin wheel castors, matching existing size and pattern, including removing defective pedestal base and fixing in position complete all as specified and as directed. |
| 61 | TABLE OFFICE OFFICER (Drawing No. FD-1002 / FD-1003) |
| 62 | M&L for top of size 1830 mm x 1220 mm made of 18 mm thick pre-laminated particle board including 6 mm thick teak wood beading fixed to edges all round with steel screws, removing defective top and fixing new top complete all as specified and as directed. |
| 63 | M&L for top of size 1525 mm x 900 mm made of 18 mm thick pre-laminated particle board including 6 mm thick teak wood beading fixed to edges all round with steel screws, removing defective top and fixing new top complete all as specified and as directed. |
| 64 | S&F brass lock, 4-lever type, complete with duplicate keys including removing defective lock and fixing in position complete all as specified and as directed. |
| 65 | M&L for removing dents and making good bends (if any), preparing old painted/treated internal and external steel surfaces excluding top by removing rust, loose paint and other foreign matter, applying stopper/putty where required to obtain a smooth and even surface, applying one coat red oxide zinc chromate primer and two coats synthetic enamel paint of approved shade/colour by spray painting machine complete all as specified and as directed. |
| 66 | TABLE STEEL 900x900x760mm (Drawing No. FD-1009) |
| 67 | M&L for top of size 900 mm x 900 mm made of 18 mm thick pre-laminated particle board including 6 mm thick teak wood beading fixed to edges all round with steel screws, removing defective top and fixing new top complete all as specified and as directed. |
| 68 | S&F PVC/rubber shoes of approved quality and size matching existing including removing defective shoes and fixing in position complete all as specified and as directed. |
| 69 | M&L for removing dents and making good bends (if any), preparing old painted/treated internal and external steel surfaces by removing rust, loose paint and other foreign matter, applying stopper/putty where required to obtain a smooth and even surface, applying one coat red oxide zinc chromate primer and two coats synthetic enamel paint of approved shade/colour by spray painting machine complete all as specified and as directed. |
| 70 | COMPACTOR : MAKE - NEWAGE (TP ITEM) |
| 71 | S&F M.S. handle of approved quality and size matching existing including removing defective handle and fixing in position complete all as specified and as directed. |
| 72 | S&F M.S. wheel of approved quality and size matching existing including removing defective wheel, greasing bearings as required, adjustment and fixing in position complete all as specified and as directed. |
| 73 | S&F bearing of approved make, type and size matching existing including removing defective bearing, cleaning housing, greasing, adjustment and fixing in position complete all as specified and as directed. |
| 74 | S&F M.S. chain set of approved quality, type and size matching existing including removing defective chain set, adjustment, lubrication and fixing in position complete all as specified and as directed. |
| 75 | S&F M.S. rail of approved quality and size matching existing including removing defective rail, alignment correction as necessary and fixing in position complete all as specified and as directed. |
| 76 | S&F lock of approved quality complete with keys including removing defective lock and fixing in position complete all as specified and as directed. |
| 77 | AUDITORIUM CHAIRS (MAKE: METHODEX) |
| 78 | M&L for dismantling and refixing auditorium chair including removal and re-fixing of floor anchor bolts, handling, transportation within premises, alignment and testing after completion of repairs complete all as specified and as directed.NOTE: Item No. 11.01 shall be measured and paid only once for each chair dismantled and refixed irrespective of the number of repair items executed on that chair. |
| 79 | M&L for replacement of damaged upholstery to seat and back using approved quality upholstery fabric costing not less than Rs 300/- per running metre and matching existing shade as closely as possible, including removal of existing upholstery, stitching and adjustment of existing foam complete all as specified and as directed. |
| 80 | M&L in repairs to tip-up seat mechanism including replacement of defective spring, bushes, pins, nuts, bolts and other connected fittings with components matching existing and compatible with OEM design of the chair, adjustment, lubrication and testing complete all as specified and as directed. |
| 81 | M&L in repairs to arm rest including tightening, replacement of defective fittings, screws, bushes and other connected components with parts matching existing and compatible with OEM design of the chair, polishing of wooden arm top where provided and making good complete all as specified and as directed. |
| 82 | M&L for preparing exposed M.S. surfaces by removing rust, loose paint and other foreign matter and applying synthetic enamel paint by spray painting or powder coating touch-up to match existing finish complete all as specified and as directed. |
| 83 | S&F floor fixing bolts, washers and anchor fasteners of approved type and size matching existing including removing defective fixings complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 day
Jul 15, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 days
Jul 15, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender