|
| 1 | Chair Dining PBOR (FD / MAP-II / 05)S&F new components of Ist class Teak wood including dismantling of old unserviceable one for rear leg complete all as specified. |
| 2 | All as per item No. 1.00 above but for front leg. |
| 3 | S&F for 4 mm thick PVC Seat with holes of material PPCP (Polypropylene Copolymer) for Chair Dining including 1mm thick stiffener (1 No) for support to seat including dismantling unserviceable one all as per drg and as directed. |
| 4 | M&L for preparation of sufaces by throughly rubbing with emery paper and applying raw / burnt seina uniformly and polishing with one or more coats to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified. |
| 5 | Chair dining (FD-1105 / 279)S&F for new components of Ist class Teak wood including dismantling of old unserviceable one for rear leg all as specified. |
| 6 | All as per item No. 5.00 above but for front leg. |
| 7 | All as per item No. 5.00 above but for rear/front/side rail |
| 8 | All as per item No. 5.00 above but for Stiffener |
| 9 | All as per item No. 5.00 above but for back rest |
| 10 | S&F for re-caning seat & back in 'Godrej' pattern with 2 mm wide and 0.6 mm thick for centre portion and 4 mm wide plastic cane for borders including dismantling unserviceable one all as specified. |
| 11 | M&L for preparation of surfaces by thoroughly rubbing with emery paper, applying raw/burnt sienna uniformly and polishing with one or more coats with melamine polish to obtain a glossy finish with and including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified. |
| 12 | CHAIR DINNING CUSHION (FD/E6/MAP/10 (R)S&F for new components of Ist class Teak wood including dismantling of old unserviceable one for rear leg all as specified. |
| 13 | All as per item No. 12.00 above but for front leg |
| 14 | All as per item No. 12.00 above but for side / back / front rails |
| 15 | All as per item No. 12.00 above but for stiffener |
| 16 | S&F for 75 mm thick cushion of 32 density cool foam with tapestry cloth fixed with 12 mm thick ply of appropriate size including dismantling old unserviceable all as specified and as directed. Note:- Cost of tapestry cloth shall not be less than Rs 550/- per meter as approved by GE. |
| 17 | M&L for preparation of surfaces of chair dinning cushioned by thoroughly rubbing with emery paper, applying raw/burnt sienna uniformly and polishing with melamine polish one or more coats to obtain a glossy finish complete all as specified. |
| 18 | Sofa sets 4/5 seater FD-281S&F for new components of Ist class Teak wood including dismantling of old unserviceable one for front leg all as specified. |
| 19 | All as per item No. 18.00 above but for rear leg. |
| 20 | All as per item No. 18.00 above but for battens. |
| 21 | All as per item No. 18.00 above but for back rail (3 seater) |
| 22 | All as per item No. 18.00 above but for front rail (3 seater) |
| 23 | All as per item No. 18.00 above but for back rail (single seater) |
| 24 | All as per item No. 18.00 above but for front rail (single seater) |
| 25 | All as per item No. 18.00 above but for hand rest |
| 26 | S&F for cushion of 40 density cool foam of size 560 mm x 530 mm x 100 mm thick with tapestry cloth cover with zip one side of cover for easy removing / closing purpose etc all specified. Make : Feather foam / Sleepwell / Kurlon |
| 27 | M&L for tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample held with office) with zip on one side of cover for easy removing / closing purposes to cover the foam of size 560 mm x 530 mm x100 mm thick all specified. Make- Feather Foam / Sleepwell / Kurlon. (Note:- Cost of tapestry cloth shall not be less than Rs 550/- per RM as approved by GE). |
| 28 | M&L for preparation of surfaces of Sofa set 4 seater by thoroughly rubbing with emery paper, applying raw/burnt sienna uniformly from chair writing and polishing with melamine polish one or more coats to obtain a glossy finish all as specified. |
| 29 | All as per item No. 28.00 above but for Sofa set 5 seater. |
| 30 | Table centre FD-274 & 235S&F for new components of Ist class Teak wood including dismantling of old unserviceable for leg all as specified. |
| 31 | All as per item No. 30.00 above but for top rail (long / front) |
| 32 | All as per item No. 30.00 above but for top rail (short / side) |
| 33 | M&L for top of center table made with 18 mm thick MDF board exterior grade (Grade-I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour / shade as approved by Engineer-in-Charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine rest all as per drg. |
| 34 | M&L for preparation of surfaces with sand/emery paper and applying melamine polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 35 | Table Peg FD- 277 & 236 / 384S&F for new components of Ist class teak wood including dismantling of old unserviceable for leg all as specified. |
| 36 | All as per item No. 35.00 above but for top rail (long / front) |
| 37 | All as per item No. 35.00 above but for top rail (short / side) |
| 38 | M&L for top made of 18 mm thick MDF board exterior grade (Grade-I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine rest all as per drg. |
| 39 | M&L fro preparation of surfaces with sand / emery paper and applying melamine polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 40 | Chair Easy FD-1108/229S&F for new components of Ist class teak wood including dismantling of old unserviceable one for rear leg all as specified. |
| 41 | All as per item No. 40.00 above but for front leg |
| 42 | All as per item No. 40.00 above but for arms |
| 43 | All as per item No. 40.00 above but for front / back / side rail of seat as to match with the existing made of teak wood all as specified. |
| 44 | S&F for re-canning seat & back in 'Godrej' pattern with 2 mm wide & 0.6 mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified. |
| 45 | M&L for preparation of sufaces by throughly rubbing with emery paper, applying raw / burnt seina uniformly and polishing one or more coats to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified. |
| 46 | Chair Writing FD-202/ 250/280S&F for new components of Ist class teak wood including dismantling of old unserviceable one for rear leg all as specified. |
| 47 | All as per item No. 46.00 above but for front leg |
| 48 | All as per item No. 46.00 above but for rear/front/Side rail |
| 49 | All as per item No. 46.00 above but for arms. |
| 50 | All as per item No. 46.00 above but for Back rest |
| 51 | All as per item No. 46.00 above but for Stiffener |
| 52 | S&F for re-caning seat & back of the chair and re-caning in 'Godrej' pattern with 2 mm wide and 0.6mm thick for centre portion and 4 mm wide plastic cane for borders including dismantling unserviceable one all as specified. |
| 53 | M&L for preparation of surfaces by thoroughly rubbing with emery paper, applying raw / burnt sienna uniformly and polishing one or more coats with melamine Polish to obtain a glossy finish with and including fixing 4 Nos of nylon buffers at the bottom of the chairs all as specified. |
| 54 | Bed plywood top FD-245 & 246S&F for new components of plywood top comprising outer member made of teak wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick one side teakwood finish plywood with 12 mm thick half cut teak wood beading including dismantling of old existing unserviceable for head board all as specified. |
| 55 | All as per item No. 54.00 above but for foot board |
| 56 | S&F for new components of Ist class teak wood including dismantling of old unserviceable one for long rail of size (90 mm x 35 mm) all as specified. |
| 57 | All as per item No. 56.00 above but for stiffener of size 60mm x 40 mm. |
| 58 | All as per item No. 56.00 above but for wooden bracket. |
| 59 | S&F for top made of 12 mm BWR phenol bonded commercial plywood with suitable screws including dismantling of unserviceable top all as specified. |
| 60 | M&L for preparation of the surfaces by thoroughly rubbing with emery paper both surfaces of the head board, foot board including legs and long rails and polishing with melamine polish one or more coats to obtain a glossy finish all as specified. |
| 61 | Table dining for 08 persons FD-30(M) / 273 & 239 S&F for new components of Ist class teak wood including dismantling of old unserviceable for leg complete all as specified. |
| 62 | All as per item No. 61.00 above but for top rail (long / front) |
| 63 | All as per item No. 61.00 above but for top rail (short / side) |
| 64 | M&L for top of table dining 08 person made of 18 mm thick MDF board exterior (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine rest all as per drg. |
| 65 | M&L for preparation of surfaces with sand/ emery paper and applying melamine polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 66 | Table dining for 06 persons FD-30 (M) / 273 & 239 S&F new components of Ist class teak wood including dismantling of old unserviceable for leg complete all as specified. |
| 67 | All as per item No. 66.00 above but for top rail (long/front) |
| 68 | All as per item No. 66.00 above but for top rail (short/side) |
| 69 | M&L for top of table dining 6 person made of 18 mm thick MDF board exterior grade (Grade-I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine rest all as per drg. |
| 70 | M&L for preparation of surfaces with sand/emery paper and applying melamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified. |
| 71 | Teapoy FD-382 / 232 & 278S&F for new components of Ist class teak wood including dismantling of old unserviceable for leg all as specified. |
| 72 | All as per item No. 71.00 above but for top rail (long / front) |
| 73 | All as per item No. 71.00 above but for top rail (short / side) |
| 74 | M&L for top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 75 | M&L for preparation of surfaces with sand/emery paper and applying melamine polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax all as specified. |
| 76 | Table (900 mm x 600) mm with / without drawer FD- 233 & 224S&F for new components of Ist class teak wood including dismantling of old unserviceable for leg complete all as specified and as directed. |
| 77 | All as per item No. 76.00 above but for top rail (long / front) |
| 78 | All as per item No. 76.00 above but for top rail (short / side) |
| 79 | M&L in repair top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 80 | M&L in repair drawer made out of 12 mm thick commercial plywood and front side made of 18mm thick MDF board one side laminated finish including provision of knob all as specified. |
| 81 | M&L for preparation of surfaces with sand /emery paper and applying melamine polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed. |
| 82 | Side board FD-372S&F for door shutters (both) made of 18 mm thick MDF board exterior grade duly providing 6mm thick teak wood beading allround with fittings and fixtures as per existing including dismantling unserviceable complete all as specified.Note:- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality. |
| 83 | All as per item No. 82.00 above but for front portion of the drawer as to match with the existing made out of 18 mm thick MDF board with laminated finish with knob including knob all as specifie. |
| 84 | S&F for top made of 18 mm thick MDF board with laminated finish duly providing 4mm thick teak wood beading all round including dismantling unserviceable all as specified. |
| 85 | S&F for 3.4 mm thick one side teak face plywood on sides (both) including dismantling unserviceable one all as specified. |
| 86 | S&F for back made out of 6 mm thick commercial plywood including dismantling unserviceable one complete all as specified. |
| 87 | M&L for preparation of surfaces with sand / emery paper and applying melamine polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified. |
| 88 | Table writing FD-249 & 275 S&F for top made of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post-formed with 0.6 mm thick laminate in colour/shade as approved by Engineer-in-Charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 89 | S&F for components of Ist class teak wood including dismantling of old unserviceable for leg all as specified. |
| 90 | All as per item No. 89.00 above but for leg (short) |
| 91 | All as per item No. 89.00 above but for side/bottom rail |
| 92 | S&F for back made out of 6 mm thick plywood commercial including dismantling unserviceable one all as specified. |
| 93 | S&F for side made out of 18 mm thick MDF Board one side laminated finish including dismantling unserviceable one all as specified. |
| 94 | All as per item No. 93.00 above but for stiffener (long) |
| 95 | S&F for drawer made out of 18 mm thick particle board one side laminated finish including provision of knob including dismantling unserviceable one complete all as specified.Note:- Knob shall be aluminium anodized (Dark Brown) chromium plated of approved size and quality |
| 96 | S&F for cupboard including drawer from the table writing and made of 18 mm thick MDF board including back provided with 6mm thick commercial plywood including dismantling unserviceable one all as specified and as directed. (Note:- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (b) Hinges shall be 50 mm of approved quality. |
| 97 | M&L for preparation of surfaces with sand / emery paper and applying melamine polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified. |
| 98 | Table Dressing Ladies with mirror FD-251/ MAPS&F for looking mirror with frame of 5 mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one all as specified. |
| 99 | S&F for drawer made of 12 mm thick commercial plywood and front side made of 18mm thick MDF board one side laminated finish and provision of knob including dismantling unserviceable one all as specified. |
| 100 | M&L for preparation of surfaces with sand / emery paper and applying melamine polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified. |
| 101 | Table Dressing Gents with mirror FD-230S&F new Looking mirror with frame of 5 mm thick of appropriate size with frame along with 6 mm thick commercial plywood back of the mirror and mirror repairs including dismantling unserviceable one complete all as specified. |
| 102 | M&L for preparation of drawer made of 12 mm thick commercial plywood and front side made of 18 mm thick MDF board one side laminated finish and provision of knob including dismantling unserviceable one complete all as specified. |
| 103 | Table bed side FD-276 S&F for top of 18 mm thick MDF board including dismantling unserviceable one all as specified. |
| 104 | S&F for side of 18 mm thick MDF board including dismantling unserviceable one complete all as specified. |
| 105 | S&F for back ply of 6 mm plywood including dismantling unserviceable one complete all as specified and shown on drawings. |
| 106 | M&L for preparation of surfaces with sand / emery paper and applying polish one or more coats of approved quality complete all as specified. Please Enable Macros to View BoQ information |
