Tender For special Repair To Bldg No T-35 (Storage Shed At Store Yard) T-436 (Bso Ua Office With Lav Block Attached ) And T-427 (Toiltet Block At Fur Yard Under Ge Bhopal
Tender Value
38.51 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
5 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-35 (Storage Shed At Store Yard) T-436 (Bso Ua Office With Lav Block Attached ) And T-427 (Toiltet Block At Fur Yard Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water or cement lime plaster any description complete. |
| 3 | M&L for 15mm thick rendering in CM 1:4 faces of brick or concrete surfaces (External surfaces) mixed with water proofing compound @ 3% by wt of cement , finished fair, even and smooth without using any extra cement complete all as specified and directed by Engr in Charge. Note :- (i) Water Proofing compound shall be measured and paid seperately)(ii) Rate is inclusive of scaffolding upto height of 12 m. |
| 4 | M&L for 10mm thick rendereing brick or concrete surface in CM 1:6 finishing the surface fair & even without using extra cement complete all as specified and directed. |
| 5 | Demolition of brickwork or stone/boulder masonry , built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings dressed stonework and precast articeles complete all as specified and directed. |
| 6 | M&L for fly ash brick work with sub class B bricks straight or curved on plan exc 6 m mean radius, built in cm 1:6 all as specified and directed. |
| 7 | M&L for fly as brick work with sub class B bricks straight or curved on plan in any radius in half brick built in cm 1:4 complete all as specified and directed. |
| 8 | Integral water profing compound mixed with cement mortar complete all as specified and directed. |
| 9 | Dismentling structural steel work including purlins,tursses,etc. complete all as specified and directed. |
| 10 | S&F steel work in tubular/angle trusses including special shaped washers, purlins, rafters, posts etc complete all as specified and directed. |
| 11 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed. |
| 12 | M&L pre galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick (AZ-150) of an colour having tensil strength of 550/MPA as in roof covering/cladding to wall/ ridge,fixed with self tapping screw/L type or J type cranked hook bolts all as specified and directed by Engr in Charge. |
| 13 | All as per ser Item No 12.00 here-in-before but plain sheet of 0.50 thick complete. |
| 14 | S & F mild steel work in hand rails, half round or other steel section or core for woodenhand-rail straight portion, guard bar drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 15 | M&L for preparation new steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified. |
| 16 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. |
| 17 | M&L granite 16-18 mm thick (of any type) work (machine cut) in steps, jambs, pillar, window-cills, cooking platform and like in 15 mm thick cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cm 1:4 complete all as specified and directed. |
| 18 | M&L for rounding to edges of stone one edge such as in steps,cooking platform and other similar situation |
| 19 | M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm gradded stone aggregate as in levelling course complete all as specified and as directed. |
| 20 | M&L for non skid ceramic, coloured tiles 7mm to 8mm thick (square /rectangular ) area of each tile exceeding 0.11 sqm , but not exceeing 0.18 sqm , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles compelte all as specified & directed |
| 21 | M&L for glazed tiles, coloured 300x450 x 6 to 7 mm thick as in skirting/dado over & including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement all as specifeid & directed . |
| 22 | M&L for vitrified ceramic tile, light shade 8-10 mm thick (square /rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors over and including 15mm thick screed bed in CM 1:6 etc and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles compelete all as specified & directed. |
| 23 | M&L for vitrified ceramic tile light shade 8-10mm thick (Square /rectangular ) polixhed , area of each tile not exceeding 0.36 sqm on vertical surfaces such as skirting dado and risers to steps etc over & including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified & directed. |
| 24 | M&L for vitrified ceramic tile, light shade 8-10 mm thick (square /rectangular) polished, area of each tile not exceeding 0.42 Sqm but n.exc 1 sqm as in floors over and including 15mm thick screed bed in CM 1:6 etc and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles compelete all as specified & directed. |
| 25 | M&L for vitrified ceramic tile, light shade 8-10 mm thick (square /rectangular) polished, area of each tile not exceeding 0.42 Sqm but n.exc 1 sqm as in floors/skirting over and including 1omm thick rendering in cm 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles compelete all as specified & directed. |
| 26 | M&L for Heavy duty flooring tiles, harsh weather & UV resistance, high abrasion resistance, MOH hardness >6 thickness 10 mm thick , area of each tile not less than 0.09 sqm , anti slip type laid in floors , steps, edges etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed |
| 27 | M&L machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete over and including 15mm thick screed bed in cement mortar 1:6 incl dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. |
| 28 | All as per item 26.00 here-in-before but in skiring over and including 10mm thick rendering in cm 1:4 incl dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. |
| 29 | Dismantling of Wall and ceiling boards (Fibre, Pulp, Insulation etc.) or insulation board/slabs/blankets, any thickness including cover fillets complete all as specified |
| 30 | M&L for galvanised cold rolled steel section frame work size 600x600 grid size 24x38x0.50 (composite thickness) Tee (bottom pre-coated ) and size 24x24x0.50m (composite thickness) thick wall angle , galvanised cold rolled steel section including suspenders as per (Gapsec) manufacturs insturction as in ceiling complete all as specified and directed. |
| 31 | M&L for asbestos free calcium silicate board of size 600x600x6mm thick fixed to steel frame work as in ceiling , including applying two coats of oil bound distemper all as specified and directed. |
| 32 | S & F solid PVC Wall Lining consisting of 5mm thick Plain colour single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 33 | S & F 5mm thick PVC sheet fillet of width35mm for wall paneling inclusive of fixing on to wall to make PVC Frame incl fillets asper specification and drawing |
| 34 | Taking up or down 15mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 35 | S&F 15mm GI tube 'medium grade' with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 36 | Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 37 | S&F 20 mm GI tube 'medium grade' with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. |
| 38 | Cutting chases, pinning in, making good to facings in brick wall where required and pointing in cement mortar 1:3 to ends cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 20 cm girth complete all as specified and directed. |
| 39 | S & F in repair for designer bevelled edge frameless looking mirror of selected quality glass of min 6mm thick fixed on wall with screws in any size complete all as specified and directed |
| 40 | S&F in repair 15 mm bib taps, chromium plated , screwed down, screwed for iron pipe or for brass ferrule and fixing complete all as specified and directed by engr in charge. |
| 41 | S&F 15 mm stop valves/angle valve , cast copper alloy, chromium plated screwed down high pressure, with crutch or butterfly handle, scrwed both ends for iron pipe or for unions and fixing complete all as specified and directed. |
| 42 | S&F in repairs 15mm bore stop cock, cast copper alloy, chromium plated with long shank and cup (concealed type) screwed down , screwd for iron pipe or union and fixed in repair complete as specified and as directed. |
| 43 | S&F in repairs 15mm dia brass CP centre hole basin mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repair brass chromium plated, shower rose 125mm in size with or without swivel joints any size incl fixing to steel pipe or union complete all as spfecified and directed. |
| 45 | S & F brass chromium plated Tubular towel rail 20mm dia with brackets and screws complete all as spfecified and directed. |
| 46 | S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 47 | S&F in repair 32mm bore PVC waste pipe for kitchen sink /WHB one mtr long complete all as specified and directed. |
| 48 | S&F in repair 125mm dia CP grating (Minium weight 25gms) complete all as specified and directed. |
| 49 | S&F in repair PVC connection 15mm size PTMT nuts of length 600mm long complete all as specified and directed. |
| 50 | S&F in repair vitreous china squanting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) including cement concrete bedding complete all as specified and directred. |
| 51 | S&F china wash down water closet pan (Pedestal Pattern), white , pedestal pan and 'P' or 'S' trap , plastic water closet seat , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 52 | S&F vitreous china oval shaped cunter sunk, wash basin, white , flat back, Size 550x400mm / std size including waste pipe, coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and directed. |
| 53 | S&F in repairs PVC low level, syphonic action, flushing cistern 10 ltrs capacity with all internal fittings incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers with connections fixed in repairs complete all as specified and directed. |
| 54 | S & F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) omplete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.Note:-Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe. |
| 55 | S&F in repair health faucets CP with 1.2mtr long CP flexible pipe of 15 mm dia complete all as specified and as directed.. |
| 56 | S&F PVC (SWR) pipe 75mm bore single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed. |
| 57 | S&F PVC (SWR) 75mm bore bends any radius, jointed with solvent cemet complete all as specified and directed. |
| 58 | S&F PVC (SWR) junction single, (SingleT) 75mm bore equal or unequal, jointed with solvent cemet complete all as specified and directed. |
| 59 | S&F PVC (SWR) junction single, (DoubleT) 75mm bore equal or unequal, jointed with solvent cemet complete all as specified and directed. |
| 60 | S&F in repairs PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches, floors or fixed in walls complete all as specified and directed. |
| 61 | S&F PVC (SWR) 110mm bore bends any radius, jointed with solvent cemet complete all as specified and directed. |
| 62 | S&F PVC (SWR) Junction (Single T) 110mm bore equal or unequal, jointed with solvent cemet complete all as specified and directed. |
| 63 | M&L 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement all as specified . |
| 64 | Taking down chowkhats or frame with shutter n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 65 | Taking down chowkhats or frame with shutters exc 1.5 Sqm but not exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed |
| 66 | M&L for fabricating and fixing powder coated (Minimum 50 miciron) aluminium sections of required size for doors, windows any type, frames, grills, beadings and partitions including aluminium hinges of required size jointing cleats, screws salsh fasterners, plug for fixing with walls, column etc including complete all as specified and directed.Note :- Rates are inclusive of necessary new fitting for door/ window/vent i.e handle, tower bolt, butt hinges, roller, slider etc complete |
| 67 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in pane complete all as specified and directed. |
| 68 | S & F 3mm thick aluminum composte panel (ACP), exterior grade, PE core, PVDF coated of approved shade complete all as specified and directed |
| 69 | S & F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 70 | S & F aluminum extruded Door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as spd and as directed. |
| 71 | S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed |
| 72 | S&F of powder coated aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 73 | S&F for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to uPVC door with beading complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F for Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45x90 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screwshavingminimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid forseparately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made. |
| 75 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge. |
| 76 | S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed |
| 77 | S&F 200 mm aluminium anodised, barrel tower bolts extruded section and fixed complete all as specified and directed |
| 78 | S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 79 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 80 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as spd and as directed. |
| 81 | M&L for complete removal of existing surface and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed |
| 82 | M&L complete removal of existing surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 83 | M&L for applying 1 mm thick one coat of white wall putty on walls complete all as specified and directed. |
| 84 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaningand stacking bricks, removing surplus serviceable bricks, hard-core,etc.. to store and rubbish notexc. 50m complete all as specified and directed. |
| 85 | Forming jambs, etc.in cm 1:4 to openings (to foregoing item), including cutting,toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed. |
| 86 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified and directed. |
| 87 | M&L TMT mild steel bars 8 mm dia, cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hookings ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 88 | M&L for reinforced cement concrete (nominal mix)) type B-1 1:2:4 ( 20 mm graded stone aggregate) in beam, shlves, column slab, etc all as specifed and directed. |
| 89 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping etc) all as specified and directed. |
| 90 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation , filling in, sub base and mass concrete complete all as specified and directed. |
| 91 | M&L for 75 mm thick PCC 1:3:6 type C-1, using 20 mm graded stone aggregate in plinth protection, aprons, hard standing, path and like including bitmuminous mastic filling in 1:3 joints(in every 3.00 mtr) and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 92 | M&L for PCC 1:2:4 type B-1 using 20mm gradded stone aggregate as in coping, kneeler, bed plates and similar articles. Complete all as specified and as directed. |
| 93 | S&F 200mm dia (DWCPE Pipe) class SN-8 structural wall polyetylene ( Pipe with online coupler and elastomeric rubber ring ) with hollow annular smooth outer surface and a smooth inner surface ( double wall plain ) for non pressure unerground drainage and sewage application Type B Nomial size ( Dn /ID ) made of polyethylene ( PE ) materia;l confirming to ISI 6098 ( Part II : 2013 and to be transported handled installed and joied asper Annex A Of ISI 6098 ( part II :2013) incl Demolition or breaking up of salt glazed ware, AC or reinforced concrete drain pipes, 200 mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified |
| 94 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 ltr hoisted and fixed in position incl 20mm dia PTMT float valve and dismantling of exisinting tank complete all as specified in SSR Part I |
| 95 | S & F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 96 | M&L for precast cement concrete type B1 (using 20 mm graded stone aggregates) as in cover slab for manholes etc set in CM 1:4 complete all as specified and directed. |
| 97 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, type C-1 using 20 mm gradded stone aggregate walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8mm dia x 3.00m depth complete all as specified and directed |
| 98 | On site Conventional type LLDPE septic tank for 10 users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 D-2 using 40 mm graded stone aggregate below foundation, Vent shaft, connection etc., complete all as specified and directed |
| 99 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 100 | M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor -stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with inel metal ms flush box, white cover plate with frame for fixing modular switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:- |
| 101 | All as per item No.99.00 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. |
| 102 | All as per item No.99.00 here -in- before but one 3 pin socket outlet 5 Amps on same board all as specified and directed. |
| 103 | All as per item No.99.00 here -in- before but 3 pin socket outlet 5 amps on independent board elect wiring 1.5 sq mm complete all as specified and directed. |
| 104 | S&F modular Switch piano, flush type, single pole, one way, 6/16 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. |
| 105 | S&F in repairs ceiling rose surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and as directed. |
| 106 | S&F modular Socket outlet, 2 module, multipurpose having provision for 2 & 3 pin, 6/16 Amp flush type, 240 volt AC complete all as specified and as directed. |
| 107 | Supply & Fixing for 1200mm with BEE 5-star rating complete aerodynamic aluminium blades & body, decorative model with air delivery 220-230 CFM, advanced BLDC 100% copper winding motor with all accessories such as regulator, conneting down rod, clamps, canopy, low noise, RF remote control for all direction sensing, Ribbed blades for high strength, Reverse rotation feature available for circulating warm-air during winter, remote with boost, timer upto 8 hours, sleep, breeze & mop modes, Model should be with ISI marked including taking down complete all as specidied and directed by Engineer-in-Charge. Note:-(i) Warranty of BLDC ceiling fan for 2 year & 5 Year of BLDC Motor. |
| 108 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specidied and directed. |
| 109 | Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specidied and directed. |
| 110 | S&F in repairs LED Ultra slim decorative aluminium casted edge ceiling light, protuded type ceiling mounted LED 2x2, luminaire, 36 watt with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper flexible cable 0.5sqmm two core complete all as specified and directed |
| 111 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specidied and directed. |
| 112 | S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. |
| 113 | S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. |
| 114 | S & F in repairs MCB SPN suitable for 240 volts, AC supply 32 Amps, C Curve, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. Legrand/Siemens/ Schneider or equivalent |
| 115 | S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.Make- Legrand/ Seimens/ Schinder. |
| 116 | M&L for sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4.00 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4.00 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and directed |
| 117 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed by Engr-In-ChargeNote :- Old/unserviceable exhaust fans to be deposited at MES Store yard |
| 118 | S & F lamp holder (Angle holder) PVC/polycarbonate type cased body with back plate suitable for pendent fittings including LED bulb of 9 Watt complete all as specified and directed. |
| 119 | Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles complete all as specified and directed. |
| 120 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete complete all as specified and directed. |
| 121 | Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed. |
| 122 | M&L for sand cushioning/ dry sand covering for underground cable protection complete all as specified and directed. |
| 123 | Supplying and laying Class LV, Type I, flat, size 250mm x 150mm x 40mmfor cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed. |
| 124 | Takng down old unservicable cable and Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16x4 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified. |
| 125 | Takng down old unservicable cable and Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10x2 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified. |
| 126 | GI Tubes, 'light grade' galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 25 mm. |
| 127 | M&L for earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4.0 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 , water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel all as specified and directed by EIC. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate. |
| 128 | S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed by Engr-in-charge. |
| 129 | S & F in repairs MCB SPN suitable for 240 volts, AC supply 32 Amps, C Curve, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. Legrand/Siemens/ Schneider or equivalent |
| 130 | S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-In-Charge.Make- Legrand/ Seimens/ Schinder. |
| 131 | Deduct Schedule of credit (calculation will be done off line) Rs. 75780.40 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender