Tender For Provn Of Storage Room For Sand Model Hall At Building No - 70 Dssc Wellington.
Tender Value
41 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
4 days left
EMD
82000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Storage Room For Sand Model Hall At Building No - 70 Dssc Wellington.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting out in soft/loose soil complete |
| 2 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as specified and as directed. |
| 3 | Removal of excavated material exc 1.5 KM and n.exc 5.0 KM and deposited where directed complete all as specified. |
| 4 | Demoilition of cement oncrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 5 | Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm ,in watering and removing surplus soil to a distance n exe 50m and making good surface in hard/dense soil all as specified and directed. |
| 6 | M&L plain cement concrete 1:4:8 type D2 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 7 | M&L Reinforced cement concrete using Type B1 1:2:4 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 8 | M&L Reinforced cement concrete using Type B1 1:2:4 20 mm graded stone aggregates as Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 9 | M&L Reinforced cement concrete using Type B1 1:2:4 20 mm graded stone aggregates as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 10 | M&L use and waste of timber as in formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for fair finished surfaces of concrete flat complete all as specified and as directed. |
| 11 | M&L use and waste of timber as in formwork to sides of square or rectangular pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete flat complete all as specified and as directed. |
| 12 | M&L use and waste of timber as in Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete flat complete all as specified and as directed. |
| 13 | Supply and fix Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columy hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia or securing with clips all as specified and as directed. |
| 14 | Ditto as item no 13 but 6 to 8 mm dia dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified. |
| 15 | S& F for Steel rolling shutters, thickness of laths in 1.25 mm with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: with gear operated type with bevel gear box and crank handle complete all as speciifed and directed. |
| 16 | M&L for one coat of aluminium painting (silver colour) on new steel sufaces (rolling shutters) including prearation of surfaces over 10 cm width or girth over one coat red oxide primer all as specified and as directed. |
| 17 | S& F Safety lever locks mild steel with 4 levers for rolling shutters all as specified and as directed. |
| 18 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified. |
| 19 | Material and labour for two coat Synthetic Enamel paint on steel surface over ober 10cm width one coat of red oxide primer incl prepareation of new or old steel surface complete all as specified and as directed. |
| 20 | M&L Pre-cast cement concrete (Type C-1, 1:3:6 using 20 mm Graded stone aggregate) block masonry with solid blocks, exc. 10cm in width and setting in mortar, 1:6 complete as specified and as directed. |
| 21 | M&L Rendering 10mm thick CM 1:6 on fair faces of brick work or concrete surfaces all as specified and as directed |
| 22 | M&L Rendering 15mm thick CM 1:4 on fair faces of brick work or concrete surfaces incl finished even and smooth (without using extra cement) all as specified and as directed |
| 23 | M&L preparation of new plastered surface and applying two coat of acrylic emulsion exterior grade on wall over a coat of primer and 1 mm wall care putty including preperation of the surface complete all as specified |
| 24 | M&L for preparation of new surfaces of walls and applying with white putty of average thickness 1.5mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint and all as specified and as approved. |
| 25 | M&L Hardcore of broken stone are boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 26 | M&L PCC 1:4:8 type D-2 using 40mm graded aggregate in sub base 100mm thick complete all as specified and as directed. |
| 27 | M&L PCC 1:2:4 type B-1 using 20mm graded aggregate in floor 25mm thick complete all as specified and as directed. |
| 28 | M & L Virified Ceramic tiles dark shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM (1:3) complete all as specified and directed . |
| 29 | M & L Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10 mm thick rendering in CM (1:4) complete all as specified and directed . Please Enable Macros to View BoQ information |
| 30 | M & L Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10 mm thick rendering in CM (1:4) complete all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender