Tender For Renovation Work At Moti Mahal Shreenathji Mandir Nathdwara
Tender Value
1.32 Crore
Estimated cost
Bid Submission
11 Jul 2026
6 days left
EMD
2.65 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajsamand → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work At Moti Mahal Shreenathji Mandir Nathdwara
BOQ
| Sl. No. | Item Description |
| 1 | Providing Wall punning in POP in line and level and right angles with AVERAGE 10mm thk including Grooves 5mmx5mm , all scafolding at any level and height.At no point of time the maximum thk of the POP to be more than 12mm thk.all complete upto the satisfaction of client / arch / engg |
| 2 | POP false ceiling Providing & fixing deisgned ceiling with round corners,moulding patti, which includes GI perimeter channels of size 0.55 mm thk. ( having one flange of 20mm and another flange of 30mm and a web of 27 mm) along with perimeter of ceiling , screw fixed to brick wall / partition etc. with the help of nylon sleeves and screws at 450mm centers. Then suspending GI intermediate channels of size 49 mm ( 0.9mm thk. With two flanges of 15 mm each) from the soffit at 900 mm centers with ceiling angles of width 25mm x 25mmx0.55 mm thick fixed to soffit up to 1.5m height with M.S. Cleat and steel expansion fasteners of half a (½) inch good quality of length 40mm , ceiling section of 0.55mm thickness having knurled web of 50mm and two flange of 26mm each with lips10.0mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 450 mm centers. 12.0 mm tapered edge POP sheet of size 900x600 is then screwfixed to ceiling section with 25mm x 8mm GI screw at 230mm centers ,Rates are including all necessary scaffolding , side pattas , cut outs , making grooves etc. as per approved design and drawing all complete upto the satisfaction of CLIENT,ARCH,ENGG. MODE OF MEASURMENT :- MEASURMENT WILL BE IN SQM ONLY , MEASURMENT FOR HORIZONTAL / VERTICAL / INCLINED PATTAS LESS THAN 300MM WILL ALSO BE CALCULATED IN SQM AS PER ACTUALS. |
| 3 | Providing & Laying POP Cornice and cornors of required design & pattern in ceiling including nailing & scafollding etc. complete with fine finishing. |
| 4 | POP Curved false ceiling Providing & fixing suspended ceiling , with corners , POP Rafters 50mmx25mm which includes GI perimeter channels of size 0.55 mm thk. ( having one flange of 20mm and another flange of 30mm and a web of 27 mm) along with perimeter of ceiling , screw fixed to brick wall / partition etc. with the help of nylon sleeves and screws at 450mm centers. Then suspending GI intermediate channels of size 49 mm ( 0.9mm thk. With two flanges of 15 mm each) from the soffit at 750-900 mm centers with ceiling angles of width 25mm x 25mmx0.55 mm thick fixed to soffit up to 1.5m height with M.S. Cleat and steel expansion fasteners of half a (½) inch good quality of length 40mm , ceiling section of 0.55mm thickness having knurled web of 50mm and two flange of 26mm each with lips10.0mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 450 mm centers. 12.0 mm tapered edge POP sheet of size 900x600 is then screwfixed to ceiling section with 25mm x 8mm GI screw at 230mm centers ,and wooden rafters 50x50 mm for support of magnetic track light Rates are including all necessary scaffolding , side pattas , cut outs , making grooves etc. as per approved design and drawing, etc, all complete upto the satisfaction of CLIENT,ARCH,ENGG. MODE OF MEASURMENT :- MEASURMENT WILL BE IN SQM ONLY , MEASURMENT FOR HORIZONTAL / VERTICAL / INCLINED PATTAS LESS THAN 300MM WILL ALSO BE CALCULATED IN SQM AS PER ACTUALS. |
| 5 | Providing and fixing DOUBLE STEPPED door frame in South 'JET' black granite 16 mm thk including,drilling holes for the locks ,etc which are to be covered with brass caps. Including groove, moulding, architraves, chamfering, polishing all edges all combined as per dwg all complete as per satisfaction of ARCH / CLIENT/ENGG. MODE OF MEASREMENT : DOUBLE STEPPED PATTI TO BE CONSIDERED AS ONE UNIT |
| 6 | Providing & Fixing DOOR marine solid flush door shutter 35mm thk.of sizes mentioned below with lipping patti 6mm thk(lipping patti to be finished with french hand polish). Greenlam laminate on shutters code 731SF on bothsides of the door 1mm thk ,with S.S hinges with S.S finish(ROYAL / SUZU Brand ) of size 4\\"x1.25\\" x 1.25\\". and mortice handles with lock and body brand KICH code MH223S of dia 19mm and indicator bolt of brand KICH code IB106S , and plastic door stopper on to the wall all complete as per satisfaction of ARCH / CLIENT/ENGG.. |
| 7 | P & F 1st quality Heavy Duty Vitrified Full body Double Charged tiles of size 300x300 mm in diamond pattern with contrasting colour tiles for design pattern and peripheral border bands as approved by Architect or EIC on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including cutting,edge grinding,chamfering wherever required and grounting/filling the joints with polymer modified/epoxy grout with matching pigment. |
| 8 | Providing and fixing of Pink sand stone (Bansi paharpur) kangoora as per approved drawing and design of 50 mm thick fixing in position over parapet wall with cement mortar 1:3 and filling joints with white cement and mixing with matching pigment.Kangoora 450mm height. |
| 9 | Providing & fixing Drawers for the wardrobe 1/2\\" plywood on sides and 6mm ply for bottom with inside laminated in 0.8mm laminate (egg-white) with 3 folds telescopic channels of 'BABA' Brand . Drawer to be finished from the outside with Greenlam laminate code 731SF. Balance underpart of the drawer to be finished in 0.8MM laminate (egg white).Lipping patti to be fixed over all 4 edges of the front and on the horizontal edges of the drawer.NO PART OF THE UNDER DRAWER TO BE LEFT EXPOSED WITHOUT LAMINATE.The drawer to be fixed on 18mm thk marine ply fixed between the two drawers and and to be finished in 0.8mm egg white laminate.The front facia of the drawer to be 1/2\\" lower than the lower ply to facilitate the opening of the drawer.,all as per drgs and mock up room,etc, complete upto the satisfaction of the client / arch / engg SIZE of drawer APPROX :Ht- 100mm .Depth – 480mm. Width- 350mm |
| 10 | Providing & Fixing of Wardrobe shutters of , made out of 3/4\\" marine pinewood blockboard shutters ( GARNET / CENTURY / KITPLY ) with lipping patti 6mm all around.The lipping patti to be finished in French hand polish.The insides of the shutters finished with 0.8mm ivory laminate & outer exposed surfaces finished in Greenlam laminate code 731SF .Each shutter to be provided with 'L' type hinge in S.S finish of brand 'FLORA'. The 'L' type hinge is to be fixed on an extra 1.5\\" x 1.5\\" C.P T.W frame which is fixed on the jaisalmer vertical and horizontals and having T.W insert of size 6\\" x 12\\" [2 nos, 1nos outside and 1 nos inside] with random holes of various sizes finished with malemine polish,with S.S saftey chain at the top from inside 300mm long , and handles to be of brand KICH code no CHH104C of 12 mm dia and lenght 288 mm and 2nos magnetic ballcatch of size 4 in each shutter , etc,,all upto the satisfaction of the client/arch/engg as per drgs all complete. |
| 11 | Supplying and fixing machine cut dressed 40 mm Pink sand stone (Bansi Paharpur) dasa/ coping having moulding as per required pattern to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matchingwith the stone shade. |
| 12 | Providing & fixing DOOR solid marine flush door shutter 35mm thk covered with 3mm thk marine ply ( with lipping patti 6mm thk to be finished with malamine polish ) .The shutter to be Greenlam laminate 1mm thk code 731SF on bothsides of shutters,with brass ball bearing hinges with S.S finish of size 5\\" x3\\" x 3\\". and mortice lock and Handle of brand KICH as per sample room with 12\\" C.P finish brass tower bolt of FLORA brand incl T.W frame of size approx 165 x 72 mm ( C.P Teakwood of grade 1 ) such that the frame flushes with the POP on both the sides of the wall with malemine polish, with door magnetic door stopper , as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG. MODE OF MEASURMENT WILL BE EACH DOOR SHUTTER CONSIDERING AS ONE UNIT. |
| 13 | Providing & fixing Single/double leaf fully pannelled door shutters with frame having details as per drawing (enclosed) with approved fittings as per mentioned below. A) FRAME - Size 150x75mm.The frame Shall be made of MP teak wood grade I high seasoned). B) SHUTTERS - MP teak wood grade Itop rail - 150x50mm lock rail - 150x50mmbotom rail - 150x50mm styles - 150x50mm intermidiate members both (horizontal & vertical) - 50x50mm C) PANEL - both side teak face 12mm thick water proof marine ply (green / century)D) FITTINGS - Brass aldrops make magnum code 7006/70 450x16mm (2 no.)Top tower bolt make magnum code 5312/53 305x9.5mm (3 no.)Bottom tower bolt make magnum code 5306/53 152x9.5mm (1 no.)Handle make magnum code 6448/64 305mm (4 nos.)Door stoper make magnum code 6120/61 105x26mm (2 no.) back door silencer (PVC) (2 no.) Hinges make magnum code no.2808/28 102x70x3 (4 no. for each shutter) |
| 14 | Providing And Fixing approved design Mild Steel decorative Jali made form ms plate 3- 6mm thk cut by CNC laser/ Plasma Machine as per approved drawing/ pattern including necessary frame of ms angle / square hollow section /flat including grinding/welding smooth finishing fixing with anchor fastners all complete in position and applying two coat of approved red oxide zinc chromate primer in the direction of engineer in charge. |
| 15 | Providing and Fixing, testing and commissioning of Ivory vitreous China Hindware Brand CORA VORTEX Cat No. 92569 Size 52.5x36.5x36 wall mounting type European water closet with seat cover with C.P. hinges, C.P. bolts, nuts, C.I. chair or other hanging arrangements, & rubber buffers, C.P. brass screw, washer etc and ALD-CHR-587 Health Faucet (ABS Body) with 8mm Dia, 1 Meter Long Spirochrome flex tube & Wall Hook of Jaquar Brand. complete with all accessories. Including cutting & making good the walls, floors, slab wherever required. All work complete as per satisfaction of Client/ Consultant / Engineer-in-charge. |
| 16 | Providing and Fixing, testing & commissioning of Concealed type flush valve FLV-1085NSQ Metropole Flush Valve Dual Flow 32mm Size (Concealed Body) With Exposed Shut Off Provision & 100mm Square Plate of Jaquar Brand. Including connection to water closet & cutting and making good the walls wherever required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 17 | Providing and Fixing, testing & commissioning of Jaquar Brand Wall mixture FUS-CHR-29281 Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) with all necessary accesseries as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 18 | Providing and fixing CP Hand Shower Single Flow HSH-CHR-1737 Hand Shower 95mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Shower Accessories SHA-SSF-549D8 Flexible Tube 8mm dia. & 1.5M Long with Nuts and SHA-SSF-555M Premium Wall Bracket for Hand Shower, 35mm dia. & 100mm Long Round Shape Rubit Cleaning System of Jaquar Brand. All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 19 | Providing and Fixing, testing and commissioning of Ivory vitreous china Brand Hindware Size: 44 cm Dia Cat. No.: 10065 under counter wash basin complete recessed at the back for the reception of pipes and fittings.Including C.P brass& Wall Flange ALD-769L300x190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange of Jaquar Brand , C.P brass ALD-709L130 Waste Coupling 32mm Size Half Thread with 130mm height and C.P. brass basin FUS-CHR-29001 Pillar Cock with Extension Body with connection pipe of Jaquar Brand , 12 mm PVC connector with C.P. Brass check nuts for connecting stop cocks etc complete in all respect.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 20 | Providing and Fixing, testing and commissioning of C.P. brass Bib cock FUS-CHR-29037 Bib Cock with Wall Flange Jaquar Brand complete as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 21 | Providing and Fixing, testing and commissioning of C.P. brass FUS-CHR-29041 Two-way Bib Cock with Wall Flange Jaquar Brand complete as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 22 | Providing and fixing CP Revolving type Overhead Shower 120mm dia Round Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish) and SHA-CHR-479L450 Shower Arm 20mm dia. & 450mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Flange with Rubit Cleaning System of Jaquar Brand. All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 23 | Providing and Fixing C.P. brass CPA-CHR-1121RD Towel Ring Square Jaquar allied fixing with brass CP screws complete. All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 24 | Providing and Fixing C.P brass AHS-CHR-1553 Toilet Roll Holder of Jaquar Brand All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 25 | Providing and Fixing C.P brass AHS-1581H Towel Rack with Lower Hanger (Stainless Steel) with hook of Jaquar Brand All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 26 | Providing and Fixing Recessed type ACN-CHR-1131N Soap Dish Holder of Jaquar Brand . All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 27 | Providing and Fixing Soap Dispenser - Push Button SDR-WHT-DJ0010FN capacity: 0.8L material: ABS finish: white/smoked of Jaquar Brand . All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 28 | Providing and Fixing, testing and commissioning of C.P. brass Jaquare make FUS-CHR-29053 Angular Stop Cock with Wall Flange with C.P. wall flange, Nut and Washer etc. complete as required.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 29 | Providing and Fixing, testing and commissioning of Ivory vitreous china Brand Hindware Rubbic Cat. No. 91041 size 48x36.5x13.5 cm Counter top wash basin complete recessed with pipes and fittings.Including C.P brass& Wall Flange ALD-769L300x190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange of Jaquar Brand , C.P brass ALD-709L130 Waste Coupling 32mm Size Half Thread with 130mm height and C.P. brass basin FUS-CHR-29021N Pillar Cock with Extension Body with connection pipe of Jaquar Brand , 12 mm PVC connector with C.P. Brass check nuts for connecting stop cocks etc complete in all respect.All work complete as per satisfaction of Client / Consultant/ Engineer-in-charge. |
| 30 | Providing and Fixing Wardrobe storage horizontal/ Vertical shelf within the wardrobe in Jaisalmer single side polish of 14mm thk with edge polished supported on walls on two sides and stuck with the vertical support of JAISALMER with ARALDITE on the third side,as per drg all complete as per satisfaction of ARCH / CLIENT/ENGG |
| 31 | Providing and Fixing Clear Glass shower area enclosure Glass Partition made out of section used 40mmx75mm and 12mm frosted toughened, fluted glass as per approved design and drawing. Frame to be finished in PU matt polish , price also includes and intermediate member with two hooks finished in black pvd finish stainless steel metal |
| 32 | Providing and fixing precast reinforced cement concrete Arches 75 mm thick with both side carving as per drawing detail as approved by Engineer In Charge. |
| 33 | Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power COB LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. .Minimum lumen output 1200 lm Warm White Make - Philips, Havells, Wipro |
| 34 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 4 blade antique type All as per pre approved by Engineer in charge |
| 35 | P & F of IP20 LED batten type light fixture made from CRCA sheet steel housing suitable for moutning LED tube system (integral driver), Power Consumption of 18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/Watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000°K, 4000°K & 6000°K.. G-1 4' LED Tube shape fixture 18W Warm white |
| 36 | Supply, installation, testing & commissioning of wall/flush mounted hangging light with 5w filament led bulb including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge |
| 37 | Hanging light fixture in room Vertica 10 Watt Pendant Mounted White Short LED Down Lighter (Warm White, Pack of 1) All as per pre approved by Engineer in charge |
| 38 | SITC of SIP RFC3261, TCP/IP/UDP, RTP/RTCP, RTCP-XR, HTTP/HTTPS, ARP, ICMP, DNS (A record, SRV, NAPTR), DHCP, PPPoE, SSH, TFTP, NTP, STUN, LLDP-MED, SIMPLE, LDAP, TR-069,802.1x, TLS, SRTP, IPv6, OpenVPN Voice Codecs and Capabilities G.711µ/a, G.722 (wide-band), G.726-32, iLBC, Opus, G.723, G.729A/B, in-band and out-ofband DTMF (In audio, RFC2833, SIP INFO), VAD, CNG, PLC, AJB, AGC, ANS Telephony Features SIP Paging, Multicast Paging, Group Paging, Push-to-Talk (PTT), call-waiting with priorityoverride QoS Layer 2 QoS (802.1Q, 802.1p) and Layer 3 (ToS, DiffServ, MPLS) QoS Security User and administrator level passwords, 256-bit AES encrypted configuration file, TLS, SRTP, HTTPS, 802.1x media access control, secure bootMulti-language English, German, French, Spanish, Portuguese, Russian, and Chinese Upgrade/Provisioning Firmware upgrade via TFTP, HTTP, HTTPS, or local HTTP upload, mass provisioning usingGDMS, TR069, or AES encrypted XML configuration file 1x 10/100 Mbps port with integrated PoE/PoE+/PoE++ input 1x 10/100 Mbps port with integrated PoE/PoE+ output Auxiliary Port 2x 2-pin Switch-in input ports, 1x 2-pin Switch-out output port, 1x differential line in port, 1x differential line out port, 2x network ports, 1x DC24V-48V port, reset Speaker 50W high-fidelity speaker Frequency: 270Hz-13.2KHzSensitivity: Up to 109 dBA at 1m/1W(1 kHz) Max SPL Up to 126dBA Microphone 3 Built-in microphones with 26.25 feet (8m) pickup distance Power & Green Energy Efficiency PoE++ Input, complies with IEEE 802.3bt standard, Class 8, Max power 71 Watt, Max Input voltage 57V; PoE+ Output, complies with IEEE 802.3at standard, Class 4, Max power 25 Watt, DC IN 24V/4A - 48V/2A IP66-rated, waterproof cable gland Installation Type Wall Mount, Pole Mount Temperature and Humidity Operation: -30°C to +60°C, Storage: -40°C to +60°C Humidity: 10% to 90% Non-condensing Package Content GSC3518HS Horn Speaker, mounting kit, quick installation guide Physical Unit Dimensions: 324.6mm(L) x 285.3mm(W) x 204.3mm(H) Unit Weight: 2.870kg (with mounting kits)Package Weight: 3.913kg Material PC + ABS (Polycarbonate-Acrylonitrile Butadiene Styrene), Aluminum back cover,Stainless steel mounting bracket Compliance FCC, IC, CE, RCM |
| 39 | SITC of AUdio System Supports up to 1500 users Supports up to 200 concurrent calls Built-in Instant Messaging (IM), Audio Conferencing & Web Meetings Free Wave App for desktop, web, Android & iOS Zero configuration provisioning for Grandstream devicesAPI support for CRM & PMS integrations Advanced security (secure boot, certificates, random password) 3 Gigabit RJ45 ports with PoE+ NAT firewall traversal for remote connectivity Hot Standby High Availability support Supports Opus codec (high quality audio) Compatible with GDMS cloud management Based on Asterisk v16 platform 3. System CapabilitiesCommunication ServicesVoice calling Instant messaging Audio meetings Web meetings Intercom systems Mobility & remote access Collaboration Features Multi-device support (IP phones, mobile, desktop) Centralized communication platform Cloud + On-premise hybrid system 4. Network & Hardware 3× Gigabit auto-sensing ports Integrated PoE+ support Built-in NAT router functionality Secure remote access via cloud (RemoteConnect) 5. Security Features Secure boot mechanism Unique device certificates Encrypted communication (TLS/SRTP) Random default passwords Firewall traversal support 6. Reliability & Performance High availability (Hot Standby) Dual deployment support Jitter resilience up to 50% packet loss Stable performance using Asterisk architecture 7. Applications Corporate offices Hotels (PMS integration) Hospitals Educational institutes Government buildingsIndustrial communication systems |
| 40 | Supply of 50W Outdoor Horn Speaker, weatherproof (IP65 or higher), suitable for PA/IP system, high SPL, complete with mounting bracket. |
| 41 | Supply of IP/Network Audio Interface / Amplifier compatible with horn speakers (if required for system integration). |
| 42 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead:Of area exceeding 3 square meter. |
| 43 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar. |
| 44 | Making the opening in masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/ windows/ clerestory windows |
| 45 | Demolishing mud phuska/ Lime dhar/ Kharanja in terracing and disposal of unserviceable material within 50 meters lead. |
| 46 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. |
| 47 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge. |
| 48 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm. |
| 49 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar. |
| 50 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate20mm nominal size). |
| 51 | Providing and laying brick kharanja on roofs with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound in square pattern 75mm to 100mm thick average |
| 52 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge |
| 53 | Add extra for subsequent story |
| 54 | Grading roof for water proofing treatment with water proffing compound Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 55 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : i) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.ii) laying second layer of Fiber glass cloth when the first layer is still green . Overlaps of joints of fiber cloth should not be less than 10 cm .iii) Third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proffing cement compound @0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around .iv)fourth and final layer of brick tiling „with cement mortar or any other approved protective coarse. (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. |
| 56 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) |
| 57 | Providing and applying superior quality emulsion for wall painting with Velvet touch/Royal paint etc of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work complete in all respect as per direction of Engineer-in charge. New Work Three or More coat |
| 58 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 59 | Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)For area of each slab from 2001 to 5000 Sq.Cm |
| 60 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer |
| 61 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint |
| 62 | Add extra for double leaf shutters. |
| 63 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' :35 mm thick .Commercial Veneer both side |
| 64 | Providing & Fixing mica of approved make for inner/ outer side of shutters with fevicol & nails complete as per approved by engineer in charge.0.6mm thick mica |
| 65 | Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : Nigeria teak wood Grade - I |
| 66 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. |
| 67 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :Above 15 cm. thick. |
| 68 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.Rajasthan Black Above 3601 Cm2 Slabs |
| 69 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.South (Red) Above 3601 Cm2 Slabs |
| 70 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 71 | Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long driveall screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting |
| 72 | Carriage of following material including loading unloading and stacking if required complete in all respect.Earth, Sand, Lime, Moorum, manure or sludge, Building Rubbish, Stone Metal (Girt and ballast etc), Stone for Masonry work & Soling and Excavated rock etc. for 5 km. |
| 73 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 74 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).Size 196mm x 1215mm. |
| 75 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).Size 600mm x 600mm |
| 76 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).Size 600mm x 1200mm |
| 77 | P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.size 600 mm X 600mm |
| 78 | Fine grinded Gangsaw cut 30-35 mm thick stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI.Mandana stone |
| 79 | 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3- fine sand) |
| 80 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20 mm thick |
| 81 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 25 mm thick |
| 82 | Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Shutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm |
| 83 | Providing and fixing Marble stone flooring table rubbed, 15 - 18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement:2marble dust with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete Rajnagar 1st quality/Ageria with light spots. Above 3601 Cm2 Slabs |
| 84 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling. Overall size 24 x 18 x 8 (inches) Bowl size 20x16x8 (inches) |
| 85 | Providing & fixing calcium silicate ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be prepainted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-inCharge of thickness of tiles as mentioned below:-8 mm thick |
| 86 | Providing Solid PVC false Ceiling consisting of 600mm x 600mm, 5mm (±0.25) thick Plain embossed PVC sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, used as panel insert in a frame work made using powder coated aluminum T- section of sizes 1” x1”( 25x25mm, 19 gauge or 1mm thick ) in square pattern of grid sizes of 2‟x2‟( 600x600mm ). The aluminum framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” ( 25x25mm ) angles etc. Complete as per direction of Engineer-In-charge, manufacturer‟s specification & drawing. |
| 87 | Providing, hoisting and fixing up to floor five level precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia Mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 (1 cement : 3 fine sand ) etc complete as per approved design excluding plastering of jambs, sills and soffits 50mm thick |
| 88 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite/Kota Stone Work Full Edge moulding |
| 89 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 90 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 91 | Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mm thickness instead of cement mortar. |
| 92 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. |
| 93 | Providing and applying P.U. paint of apporved brand and manufature to even shade Two or more coats on New works |
| 94 | Providing and laying brick tiles of class designation 100 over roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand ) and finished neat . |
| 95 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work |
| 96 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal ofsurplus excavated soil as directed with in a lead of 50 meter.All kinds of soils |
| 97 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work upto plinth level. M10 grade Nominal Mix 1:3:6 (1 cement :3 coarses and :6 graded stone aggregate 20mm nominal size). |
| 98 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor fivelevel excluding the cost of centering and shuttering.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size) |
| 99 | Random rubble dry stone Kharanja under floor. |
| 100 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix |
| 101 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 102 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 103 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :Walls (any thickness) including attached pilasters, buttresses plinth and string |
| 104 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 105 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. |
| 106 | Add Extra if I/rail section is used |
| 107 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonary 100mm/125mm thick with Grade-I AAC blocks of density 551 to 650 kg/cum conforming to IS : 2185 (Part-3) in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos. 6 mm dia MS bars at every third course of masonary work |
| 108 | Add extra for AAC block masonary work in superstructure above floor five level, for each four floors or part thereof. |
| 109 | P & F Bevelled edge Mirror/mirror with teak wood lipping round of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. |
| 110 | P & F grating of approved quality/make C.P. brass with frame (heavy) and superior quality Square 150 x 150 x 8mm. (Anti Cockroach) |
| 111 | Providing and fixing GI pipes (External work) with GI fittings excluding union (IS : 1239 mark) incl. trenching and refilling earth etc. 15mm dia nominal bore ‘B’Class. |
| 112 | Providing and fixing GI pipes (External work) with GI fittings excluding union (IS : 1239 mark) incl. trenching and refilling earth etc. 25mm dia‘B’Class. |
| 113 | Providing and fixing GI pipes (External work) with GI fittings excluding union (IS : 1239 mark) incl. trenching and refilling earth etc. 50mm dia ‘B’Class. |
| 114 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 75 mm dia |
| 115 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia |
| 116 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia |
| 117 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Reducer 110x75 mm110mm |
| 118 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Plain Tee 75mm |
| 119 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Plain Tee 110mm |
| 120 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Door Tee 110 mm |
| 121 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Bend 87.5, 75mm dia. |
| 122 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Bend 87.5, 110 mm dia. |
| 123 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Door Bend top side 110 mm |
| 124 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant coupler (Socket) 75mm |
| 125 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant coupler (Socket) 110 mm |
| 126 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Vent Cowel 110mm dia. |
| 127 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Multi floor trap 110mm dia. |
| 128 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant . Bend 45 110mm |
| 129 | P/F rigid PVC pipe fittings (IS:4985 mark) of approved quality/make incl. jointing the pipe with solvent cement rubber ring and lubricant Pipe Clip 110 mm |
| 130 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)15 mm nominal size |
| 131 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal size |
| 132 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)25 mm nominal size |
| 133 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)32mm nominal size |
| 134 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).50 mm nominal size |
| 135 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:2000 Litre capacity. |
| 136 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. Short point (up to 3 mtr.) |
| 137 | Medium point (up to 6 mtr.) |
| 138 | Long point (up to 10 mtr..) |
| 139 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. On board |
| 140 | Short point (up to 3 mtr.) |
| 141 | Medium point (up to 6 mtr.) |
| 142 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required. |
| 143 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required.Gr.-1 1 x 1.5 sq.mm |
| 144 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 145 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 146 | 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. |
| 147 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 Single pole MCB 6 A to 32 A rating |
| 148 | Four pole MCB 40 A 63 A rating |
| 149 | Double pole MCB 6 A to 32 A rating |
| 150 | S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 20 mm |
| 151 | 25 mm |
| 152 | 40 mm |
| 153 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required 5 step fan regulator 2 Module |
| 154 | Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .300 mm sweep(900/1400 RPM) |
| 155 | Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity >95% thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 8 SWG tinned copper Wire |
| 156 | Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 157 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Glazed door (Three phase) IK-09 and IP-43 with Metal end box 8 Way |
| 158 | Providing & Fixing of Recessed/surface mounting heavy duty horizontal type TPN phase selector Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with 100 amp. insulated copper bus bar/ shorting link , neutral link, earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet provided with 3 nos 63 Amp rotary switches,3 nos rocker switches for phase identifications etc. making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 4Way(Incomer 8,Outgoing 4+4+4) 4Way |
| 159 | SITC of 3 /4 pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage 690 V. provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR up to 100 Amp , 25 kA, adjustable O/L & adjustable S/C setting, |
| 160 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 16.0 Sq. mm 4 core |
| 161 | 35.0 Sq. mm 3.5 core |
| 162 | Providing & Fixing of IP20, 1100-1200 mm x 50-60 mm x 70-85 mm size Suspended mounting Mid power SMD type LED linear Light fixture made from Extruded Aluminium housing, PMMI diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 100 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .Minimum lumen output 2000 lm |
| 163 | Providing & Fixing of following modular accessories as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , minimum width of 1 module switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . Blanking plate |
| 164 | USB Charger 1 A - 1 M with BIS mark |
| 165 | RJ-11 telephone jack single line |
| 166 | LED Skirting /Foot Light 2/3 Module |
| 167 | RJ-45, Cat 6 computer jack with shutter |
| 168 | Modular MCB 6 A to 32 A SP |
| 169 | Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified 'Class O' in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 15.9 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick) |
| 170 | 6.4 mm O.D., wall thinkness ≥ 0.8mm (insulation – 13 mm thick) |
| 171 | Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 20mm |
| 172 | Providing & Fixing of modular type lockable feature socket duly ISI marked (IS :1293) as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , minimum width of 1 module switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .13 A flat pin international socket |
| 173 | Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 174 | Supply, Fixing and testing of following capacity ISO certified company made wall mounted stabilizer having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp /20 Amp Industrial plug top making connection etc complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 3 kVA |
| 175 | Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19\\" angles with wall mounting provision on wall. Accessories like: 1 No of 19\\" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19\\" 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 6 U Rack with Width 600 mm & Depth 400 mm + 100 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender