|
| 1 | Material and Labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as required , depth of embedded portion of holdfast exc half bricks and not exc one brick complete all as specified and directed. |
| 2 | Material and Labour for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for filling in holdfast complete all as specified and directed. |
| 3 | Taking down chowkat without taking off shutter from frame exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 4 | Taking down shutter from frame exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed. |
| 5 | Supply and Fixing Pressed steel frame for doors of size 125mm X 60mm made out of 1.25 mm thick steel sheet with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed. |
| 6 | Supply and Fixing pressed steel frame of size 105x60mm made out of 1.25 mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed |
| 7 | Material and Labour for PCC 1:3:6 type C-0 using 12.50mm graded stone aggregate as in filling of pressed steel chowkat complete all as specified and directed. |
| 8 | Supply and Fixing 35mm thick(IIst Class hardwood) factory made gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass , etc, sizes of members of shutters as specified in SSR Part I , Section 8 , Clause 8.20 (a) , Supplied and fitted to chowkats complete all as specified and directed. |
| 9 | Supply and Fixing 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed. |
| 10 | Supply and Fixing 30mm thck flush shutters, solid core construction with block board core and plywood face panels , commercial type on both sides complete all as specified and directed. |
| 11 | Supply and Fixing Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed length of bolt 250 mm complete all as specified and directed. |
| 12 | Supply and Fixing Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fix 150mm long complete all as specified and directed. |
| 13 | Supply and Fixing 150 mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 14 | Supply and Fixing in repair 2nd class hard wood plain, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in cupboards, almirah in any position complete all as specified and directed. |
| 15 | Supply and Fixing in repairs 40mm width continuous (paino) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 16 | Supply and Fixing in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves complete all as specified and directed. |
| 17 | Supply and Fixing in repairs cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed. |
| 18 | Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each complete all as specified and directed. |
| 19 | Supply and Fixing steel windows with side hung shutters including projected type hinges with steel handle steel peg stay complete with glazing bar dovetailed / welded complete all as specified and directed. |
| 20 | All as per item No 19 above but without glazing bars ( for mosquito proof shutter ) complete all as specified and directed. |
| 21 | S &F mild steel work in framed work such as grills framed guard bars, gratings, ladders etc with ends of bars shouldered and / or riveted or forged into spikes and similar work complete all as specified and directed (Fe290 Gde E-165). |
| 22 | Supply and Fixing 3mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 23 | Supply and Fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to new steel window with nut bolt,fixed complete all as specified and directed. |
| 24 | Supply and Fixing in repairs 100 mm mild steel butt hinges medium weight, cold rolled complete all as specified and directed. |
| 25 | Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip & Supply and Fixing ordinary plain glass 3mm thick glazing with oil putty in squares n exc 0.5 sqm each pane complete all as specified and directed. |
| 26 | Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip & Supply and Fixing Figured glass, pinhead type 4mm thick glazing with oil putty in squares n exc 0.5 sqm each pane complete all as specified and directed. |
| 27 | Supply and Fixing fixed in repairs. 4mm thick sheet glass ordinary quality exc 0.50Sqm but not exc 1.00Sqm each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws complete all as specified and directed. |
| 28 | Supply and Fixing in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel /wooden/Aluminium window with nut bolt etc. complete all as specified and directed. |
| 29 | Material and Labour for preparation to new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed. |
| 30 | Material and Labour for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over and including a coat of red oxide primer complete all as specified and directed. |
| 31 | Supply and Fixing powder coated aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 32 | Supply and Fixing aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with and including two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia and 1.40 mm average width of aparature SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching existing complete all as specified and directed. |
| 33 | Supply and Fixing powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ mtr including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 34 | Supply and Fixing 4mm thick powder coated aluminium Panel (ACP) including necessary aluminium frame work fixed complete all as specified and directed. |
| 35 | Supply and Fixing Powder coated Anodised Non Transparent decorative type like linening Toughened glass 5.5mm thick in aluminum door glazing in each panel with rubber packing complete all as specified and directed. |
| 36 | Supply only 5.5mm thick sheet glass ordinary quality and glazing exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 37 | Supply and Fixing aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass 4 mm thick fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh 0.36mm dia and 1.40 mm average width of aparature fixed type on outside frame etc. including taking down existing steel ventilator complete all as specified and directed. |
| 38 | Supply and Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and directed. |
| 39 | Supply and Fixing factory made PVC solid panel door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panelling of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed. |
| 40 | Supply and Fixing stainless steel Butt hinges 75 mm long, medium weight, cold rolled steel complete all as specified and directed. |
| 41 | Supply and Fixing in 125 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 42 | Supply and Fixing in Aluminium, anodised, barrel tower bolts of extruded section 125mm long complete all as specified and directed. |
| 43 | Demolition of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and directed. |
| 44 | Material and Labour for Granite slab 20 mm thick machine cut bedded and jointed with grey cement and pointed with adhesive of pigment to match the shade incl cutting and polshing complete all as specified and directed. |
| 45 | Material and Labour for dismantling steel rolling shutter including assembly exceeding 4 Sqm but not exceeding 12 Sqm and repair for proper functioning by replacing rolling assembly and re-erecting the shutter, including straightening, cutting and welding of shutter angles, channels providing proper guides as required and making good, functioning by applying greasing , oiling for smooth and easy movement of the shutter and applying two coats of synthetic enamel paint of matching colour/shade, complete all as specified and directed. |
| 46 | Supply and Fixing in repair Collapsible steel gate, top hung , consisting of channel pickets, pivoted flat bar, top & bottom runner, brass handle etc as specified erected in position and securing runners with holdfast & brackets complete all as specified and directed. |
| 47 | Supply and Fixing in repair locking arrangements of CP brass for aluminium doors i.e , by placing new lock 4 lever, vertical type of 65mm , with triplicate key etc complete all as specified and directed. |
| 48 | Supply and Fixing in repairs Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed & fixed length of bolt 250 mm complete all as specified and directed. |
| 49 | Supply and Fixing in repairs Mild steel barrel tower bolts, stove enamelled black, with bright bolt 150mm long complete all as specified and directed. |
| 50 | Supply and Fixing in repairs150 mm size Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. |
| 51 | Material and Labour for spot welding for repairing steel windows and ventilators hinges, brackets, steel handles etc complete all as specified and directed. |
| 52 | Supply and Fixing in repairs 20mm dia powder coated aluminium brackets for curtain rods complete all as specified and directed. |
| 53 | Supply and Fixing in repairs 20mm Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 54 | Supply and Fixing in repairs drawer handles , mild steel , flush drop (65mm to 75mm grip) on 4 screw plate, complete all as specified and directed. |
| 55 | Supply and Fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 56 | Supply and Fixing in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851mm to 1000 mm in width and of weight between 61 kg to 80 kg and fixed complete all as specified and directed. |
| 57 | Supply and Fixing in repairs 150mm rubber door stopper of aluminium alloy body, anodised complete all as specified and directed. |
| 58 | Supply and Fixing in repairs vertical type varishing blinds with sliding & revolving track & 100mm wide approved coloured fabric etc complete all as specified and directed. |
| 59 | Dismantling wall and ceiling boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed. |
| 60 | Material and Labour for snap grid ceiling with 19mm thick semi - perforated edge 60x60cm in ceiling board over and including GI grid prelude XL 24 mm grid main runner height 37mm and secondary runner height 30mm including 2.6mm/2.8mm GI wire suspenders of suitable length as per manufacturers instructions complete all as specified and directed. |
| 61 | Material and Labour for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade , angle 24mm x24mmx0.43mm, 'T' section 24mmx25mmx0.30mm and main runner 'T' section 24mmx38mmx0.35mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c , hanging with 2.50 mm /3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of plastic emulsion paint over and including one coat of primer and preparation of surface complete all as specified and directed. |
| 62 | Material and Labour for 10mm thick PVC insulated panels 600x600mm with EPS stuck to 1mm printed PVC sheet suitable placed in and including flase ceiling grid made of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges for 20mm and 30 mm and web 27 mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended form soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mtr length) of 0.55 mm fixed to the intermediate channel with connecting clips across the intermediate channel with connecting clips across the intermediate channel at 457 mm centre ot centre. Hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 63 | Supply and Fixing POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction complete all as specified and directed. |
| 64 | Material and Labour for preparation of plastered or unplastered old decorated surfaces of walls including brooming down of smoke spots, moulds, moss efflorescent salts, treating oil and greasy spots and applying of one coat of oil bound distemper on walls complete all as specified and directed. |
| 65 | Material and Labour for preparation of plastered or unplastered old decorated surfaces of ceiling including brooming down of smoke spots, moulds, moss efflorescent salts, treating oil and greasy spots and applying of one coat of white wash on ceiling on ceiling surfaces complete all as specified and directed. |
| 66 | Material and Labour for preparation of plastered or unplastered old decorated surfaces of walls including brooming down of smoke spots, moulds, moss efflorescent salts, treating oil and greasy spots and applying of one coat of cement base paint on walls complete all as specified and directed. |
| 67 | Material and Labour in repais for 6 mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with 'L' type or J type or cranked hook bolts complete all as specified and directed. |
| 68 | Material and Labour in repair for Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L-type or J-type hook to roof complete all as specified and directed. |
| 69 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 70 | Material and Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 71 | Supply and Fixing in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, sunshades/chajjas etc fixed with self tapping screws complete all as specified and directed. |
| 72 | Supply and Fixing in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ridge,eaves gutters with end stops,drop ends or nozzles etc as required at site,eaves board etc, fixed with self tapping screws complete all as specified and directed. |
| 73 | Supply and Fixing in repair 5 mm thick colour of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed. |
| 74 | Supply and Fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall and make PVC frame/grid manufacturers instruction complete all as specified and directed. |
| 75 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 76 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 77 | Supply and Fixing 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 78 | Fixing only GI tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and directed. |
| 79 | Supply and Fixing 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 80 | Fixing only GI tubes of 20 mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and directed. |
| 81 | Material and Labour for cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth, complete all as specified and directed. |
| 82 | Dismantling water tanks of capacity exc 250 litres but n exc 500 litres and removing to store complete all as specified and directed. |
| 83 | Dismantling water tanks of capacity exc 500 litres but n exc 1000 litres and removing to store complete all as specified and directed. |
| 84 | Supply and Fixing rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) of capacity 500 litre hoisted and fixed in position complete all as specified and directed. |
| 85 | Supply and Fixing rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) of capacity 1000 litre hoisted and fixed in position complete all as specified and directed. |
| 86 | Supply and Fixing in repair PVC valveless syphonic action type flushing cistern (Low level) of 10 litre capacity, white with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 87 | Supply and Fixing in repair ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed. |
| 88 | Supply and Fixing in repair ball valves suitable for 15 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 455 gms) complete all as specified and directed. |
| 89 | Supply and Fixing in repairs stop valves, 15 mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 90 | Supply and Fixing in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed. |
| 91 | Supply and Fixing in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts complete all as specified and directed. |
| 92 | Supply and Fixing in repairs PVC waste outlet pipe for 32/40mm dia for WHB complete all as specified and directed. |
| 93 | Supply and Fixing in repairs PVC waste outlet pipe for kitchen 32/40 mm Kitchen sink complete all as specified and directed. |
| 94 | Material and Labour for cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and Material and Labour for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30 to 40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and directed.. Make: PIDILITE or equivalent |
| 95 | Material and Labour for making hole and fixing the metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30 to 40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50 complete all as specified and directed. Make: PIDILITE or equivalent |
| 96 | Material and Labour for tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing , cleaning the surface etc, complete all as specified and directed. |
| 97 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 98 | Material and Labour for Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 99 | Material and Labour for Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick plastering in cm 1:4 complete all as specified and directed. |
| 100 | Material and Labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 101 | Supply and Fixing Vitrified ceramic coloured tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6 , set and jointed in neat cement lsurry and pointed in white or coloured cement to match the surfaces of tiles complete all as specified and directed. |
| 102 | Supply and Fixing in repairs Wash basins, vitreous China (flat back or angle back type) 630 mm X 450 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing and supply of waste pipe complete all as specified and directed. |
| 103 | Supply and Fixing in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 104 | Supply and Fixing in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 105 | Supply and Fixing in repairs 15mm dia bore fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 106 | Supply and Fixing in repairs CP two way bib taps screwed for iron pipe and fixed necessary fitting with and incl PVC connection complete all as specified and directed. |
| 107 | Supply and Fixing in repairs Vitreous China Urinal, half stall type, white complete including CP waste coupling, CP spreader etc complete all as specified and directed. |
| 108 | Material and Labour for taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed. |
| 109 | Supply and Fixing PVC (SWR) pipes 110 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 110 | Supply and Fixing PVC (SWR) 110mm dia bends any radius complete all as specified and directed. |
| 111 | Supply and Fixing PVC (SWR) branch 110mm bore piecs, single ( single Y ) equal or unequal complete all as specified and directed. |
| 112 | Supply and Fixing PVC (SWR) pipes 75 mm dia single sockets , in any length rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 113 | Supply and Fixing PVC (SWR) 75 mm dia bends any radius complete all as specified and directed. |
| 114 | Supply and Fixing PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal complete all as specified and directed. |
| 115 | Supply and Fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 116 | Supply and Fixing in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 117 | Supply and Fixing in repairs wash down water closet ( European type) excluding fixing bolts, flushing cistern, & flush pipe but including connecting to existing out let pipe etc complete all as specified and directed. |
| 118 | Supply and Fixing in repairs Plastic seat cover to EWC with aluminium hinging device complete all as specified and directed. |
| 119 | Supply and Fixing in repairs PVC (SWR) 75mm outer dia multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 120 | Supply and Fixing in repairs Soap dish vitirous china fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 121 | Supply and Fixing in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed. (Make : Jaguar, Cat Part No CAN -1173) |
| 122 | Supply and Fixing in repairs Looking mirror 600mm x 450 mm beveled edge of selected quality glass fixed with PVC moulded frame, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 123 | Material and Labour for cleaning and removing all scale and dirt etc from tank of any type (RCC or PVC) and from mouths of circulating pipes exceeding 250 litre capacity and not exceeding 500 litre capacity complete all as specified and directed. |
| 124 | Material and Labour for cleaning and removing all scale and dirt etc from tank of any type (RCC or PVC) and from mouths of circulating pipes exceeding 500 litre capacity and not exceeding 1000 litre capacity complete all as specified and directed. |
| 125 | Supply and Fixing in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters etc including hinging device complete all as specified and directed. |
| 126 | Supply and Fixing in repair PVC water tank cover with fitting suitable for tank of capacity of 500 to 1000 liters etc including hinging device complete all as specified and directed. |
| 127 | Supply and Fixing in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, complete all as specified and directed. |
| 128 | Supply and Fixing in repairs Chromium plated shower roses 125 mm size SRC with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 129 | Material and Labour for 20mm to 25mm thick machine cut cuddappah stone slab flooring over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl grinding polishing complete all as specified and directed. |
| 130 | Material and Labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 131 | Supply and Fixing in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm complete all as specified and directed. |
| 132 | Supply and Fixing in repairs Health faucet brass chromium plated with connecting decorative pipe including all accessories required for fixing of 15 mm bore of pipe complete all as specified and directed. |
| 133 | Supply and Fixing in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed. |
| 134 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 135 | Material and Labour for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 complete all as specified and directed. |
| 136 | Material and Labour for rendering 10 mm thick in cement mortar 1:4 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement complete all as specified and directed. |
| 137 | Material and Labour for applying two coat of oil bound distemper over and including a coat of primer to newly plastered surface including preparation of new plastered surfaces to wall complete all as specified and directed. |
| 138 | Material and Labour for applying three coats of white wash to newly plastered surface of ceiling including preparation complete all as specified and directed. |
| 139 | Supply and Fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to new steel window with nut bolt, fixed complete all as specified and directed. Please Enable Macros to View BoQ information |
