Name of Work:- PROVISION OF PU/EPOXY COATING FLOORING AT SUGAR STORE HOUSE(P-90) AT BVY (V)
Sl. No.
Item Description
1
SCHEDULE 'A' PART-I: B/R WORKS
2
Material and labour for cut open all anchor grooves along floor topping termination points and alround the columns, all cracks in the floor concrete including all other joints to a depth not less than 20mm including preparation of existing concrete substrate surfaces mechanically using sand blasting, shot blasting or scarifier inclusing wire brushing as required and removing all foreign matter, dust and debris etc by industrial vaccuum cleaner followed by thorough water wash to obtain clean and sound substratge to ensure maximum bonding between the substrate and coating system including filling the cut open grooves/cracks/joints with epoxy mortar as per manufacturers recommendations finishing the surface to even and plain using suitable means to remove all imperfections, trowel marks and entrapped air. complete all as specified as directed and as per manufacturers instructions.
3
Material and labour for 5mm thick Epoxy flooring (designed for maximum load of 20 KN/Sqm) comprising of 2mm thick self levelling three component solventless epoxy pigmented top coat over 3mm thick self levelling three component epoxy based screed/ scratch coat over 50 microns thick two components solvent less high solid epoxy resin based floor primer coat using suitable serrated trowels and spiked nylon rollers. complete all as specified as directed and as per manufacturers instructions.
4
Material and labour for two coats of sloventless epoxy coating (total coated thickness 500 microns)TCS10 Grade, 100 mm girth over solventless epoxy primer coat over one or more coat of white cement based wall care putty including complete removal of existing treatment of any description on coving and preparation of surfaces and levelling wherever required with epoxy mortar (epoxy primer + quartz sand) complete all as specified as directed and as per manufacturers instructions.
5
M &L for removing of the existing sealant and backer rod from the expansion joint grooves of size 25mm x 30mm including preparation of the surfaces mechanically by industrial vaccuum cleaner/blower to remove all foreign matter, dust and debris unsound or contaminated material, paste, oil, paint, grease, corrosion deposits or algae and grease deposit and applying two compnents epoxy based primer to the groove and inserting polysulphide elastomeric sealent complete all as specified as directed and as per manufacturers instructions.
6
Demolition of damaged kota stones across the area randomly on the floor and shall be treated with epoxy primer followed by high solid epoxy mortar bed - cipoxy18 & silica sand evenly as per EIN directions Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.