|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed |
| 2 | Material and labour for PCC 1:3:6 type C-2 , 40 mm graded store aggregate 75 mm thick as in plinth protection complete all as specified and directed |
| 3 | Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | Material and labour for 15 mm thick plastering in cement mortar 1:4 on external plaster finished the surfaces (upto 12 mtr height) using 3% of WPC by weight of cement or as per manufacturer instruction complete all as specified and directed. Note : Rates shall deemed to be inclusive of cost of water proofing compound. |
| 5 | Material and labour for 12 mm thick ready mix plaster external plaster finished the surfaces (upto 12 mtr height) using 3% of WPC by weight of cement or as per manufacturer instruction complete all as specified and directed. Note : Rates shall deemed to be inclusive of cost of water proofing compound. |
| 6 | Material & Labour for preparation of new plastered surface and applying finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed |
| 7 | Material and labour for complete removal of existing treatment, preparing the surfaces and applying finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed |
| 8 | Material and labour for rendering 10mm thick in CM 1:4 finished even & smooth with thin layer of sagol finish but as in ceiling complete all as specified and directed. |
| 9 | Material and labour for applying three coat of white wash on ceiling including preparation of new surfaces complete all as specified and directed. |
| 10 | Material and labour for applying one coat of white wash on celing on old surfaces including preparation of old surfaces including cleaning smoke efflorocense of any type or spot of nail filled with putty complete match to old surface complete all as specified and directed. |
| 11 | Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol complete all as specified and directed. |
| 12 | Material and labour for preperation of new plastered surfaces & applying two coats of oil bound distember over a coat of alkali resistant primer complete all as specified and directed. |
| 13 | .Material and labour for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including chalk whiting preparation of old surfaces , on plastered surfaces prepratary to distempering complete all as specified and directed |
| 14 | Material and labour for water proofing treatment of External plaster walls, chhajjas DFT: 110 microns by applying two coats of elestromeric coating Raincoat, material covering capacity 3 Sqm per litre in 2 Coats without dilution & 1 coat of efflorescent resistant primer 10sqm/litre/coat after cleaning the surface throughly and sealing all cracks with acrylic sealing compound as per the manufacturers specifications and directions of Engr-in-Charge Make :- Raincoat shall be of PlDlLlTE or equivalent. The product shall have following properties: Elongation > 100% as per ASTM D 412, Tensile strength : 2.5 Mpa as per ASTM D 412, Water Resistance conforming to SS 500, Crack bridging ability conforming to Class A4 as per EN 1062 Part 7, Positive hydrostatic pressure > 7 bar as per DIN 1048, Anti-carbonation property complying EN 1062 Part 6, RCPT conforming to ASTM C 1202 complete all as specified and directed. |
| 15 | Material and labour for providing water proofing plaster at the junction of wall & slab at chajja, lintel etc of avg thickness 20mm in CM (1:3) with water proofing compound, finished even and smooth without using extra cement all as specified and directed.Note : Rates shall deemed to be inclusive of cost of water proofing compound. |
| 16 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 17 | Material and labour for precast cement concrete, 1:3:6 type C-1, (20mm graded stone aggregate) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:6) complete all as specified and directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 19 | Material and labour for Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed. |
| 20 | Material and labour for Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and 10 mm thick plastering in cm 1:4 complete all as specified and directed. |
| 21 | Material and labour for cement concrete 1:4:8 type D-2, (40mm graded stone aggregate) 75 mm thick in sub base or similar items complete all as specified and directed |
| 22 | Material and labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 23 | Material and labour for 80 mm thick coloured rubburised, glossy finish machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade complete all as specified and directed by Engineer-in Charge. |
| 24 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 25 | Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 26 | Supply and fix in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, sunshades/chajjas etc fixed with self tapping screws complete all as specified and directed |
| 27 | Supply and fix in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ridge,eaves gutters with end stops,drop ends or nozzles etc as required at site,eaves board etc, fixed with self tapping screws complete all as specified and directed |
| 28 | Supply and fix mild steel work in framed work such as grills framed guard bars, gratings, ladders etc with ends of bars shouldered and / or riveted or forged into spikes and similar work code complete all as specified and directed. Please Enable Macros to View BoQ information |
