|
| 1 | M&L for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 incl. demolition of brick work complete all as specified and directed. |
| 2 | M&L for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 (Except brick ) incl. demolition of brick work complete all as specified and directed. |
| 3 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces on wall, other than finished even and smooth without using extra cement complete all as specified and directed |
| 4 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint. complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete incl. demoilition of cement concrete all as specified and directed. |
| 6 | M&L for 75 mm thick cement concrete type-D-2, 1:4:8 using 40mm graded stone aggregate as in sub base incl. demoilition of cement concrete all as specified and directed. |
| 7 | M&L for Chequered cement concrete tiles having hard rubber finish top with polymer admixtures in any pattern or design of min size 30cm x 30 cm x 25 mm thick, set jointed and poited in neat cement slurry in floors over 15 mm thick screed bed in CM mortar 1: 4 all as specified &directed |
| 8 | M&L for Machine pressed precast concrete interlocking paver block having hard rubber finish top with polymer admixtures in any pattern or design any shape and size confirmeing to IS-15658-2006 of 60 mm thcik, M-35 grade with grey cement and no pigment over 50 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 9 | Dismantling posts or struts (wood, steel or R.C.C.) embeded in concrete any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 10 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any weight n exceeding 4kg/sqm complete all as specified and directed. |
| 11 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, all as specified and directed. |
| 12 | M&L for cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 13 | M & L steel work conforming to Fe 410-0 or Fe 310-0 in joist channel angle rolled section ,ms plate,sheet as in door , posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.complete all as specified and directed |
| 14 | Supply only MS galvanised chain link fencing, any size or shape as per sample approved by GE complete all as specified and directed. |
| 15 | Fixing only chain link fencing including line wires, any mesh, size and type to any typeof standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 16 | M & L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5 cm long dia of neck 11 to 15 mm complete all as specified and directed. |
| 17 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins in repairs, etc complete all as specified and directed.(each line wire to be measured) |
| 18 | Restraining Resecuring including making good wire staples of galvenised barbed wire etc complete all as specified and directed. |
| 19 | M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed Please Enable Macros to View BoQ information |
