Tender For Special Repair To Bldg No P-02, P-18 & P-38 At Old Amritsar Cantt.
Tender Value
37.29 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
9 days left
EMD
74580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-02, P-18 & P-38 At Old Amritsar Cantt.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Jul-2026 | Date | Date | 17-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified directed. |
| 2 | Material & Labour for 25 mm thick PCC 1:2:4 type B 0 (using 12.5 mm graded stone aggregate) as in base of flooring etc where required complete all as specified directed. |
| 3 | Material and labour for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.18 sq.m but not exceeding 0.38 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed. |
| 4 | Material & Labour for Glazed ceramic coloured tiles in vertical surfaces 350 x 250x7 /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, & incl 10mm thick rendering in Cement Mortar 1:3 complete all as specified directed. |
| 5 | Taking down cement plaster on brick or concrete walls, ceiling etc, including racking out joints , hacking for key, scrubbing down with water etc complete all as specified & directed. |
| 6 | Material & Labour for rendering 5mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified directed. |
| 7 | Material & Labour for Rendering 15 mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | Material & Labour 15 mm thick cement plaster in Cement Mortar 1:4 mixed with liquid water proofing compound @ of 3% as on other than fair face of brick or concrete surface of walls finished surface even and fair all as specified and directed Note : Supply only water proofing liquid shall be measured and paid separately, complete all as specified directed. |
| 9 | Material & Labour preparing New plastered surfaces applying two or coats of 100%Premium acrylic emulsion paint having VOC less than 50 Gm/litre and UV resitance as per IS 15489: 2004, Alkali & fungal resisitance , dirt resitance extterior paint of required shade (Company Depot Tinted) withsilidon addiitives @ 1.43 litr/10 Sqm over and including priming coats of exterior priomer applied @ 0.90 litrs/10 Sqm over new surfaces all as specified upto height of 7.5 mtrs . |
| 10 | Material & Labour preparing New plastered surfaces on walls one coat of primer paint, and applying two coat of oil bound distemper over primer includes 1 mm wall care putty complete all as specified and directed. |
| 11 | Material & Labour preparing Old plastered surfaces comlete removal of existing treatment on walls one coat of primer paint, and applying two coats of oil bound distemper over a coat of primer and preparation with wall care putty, complete all as specified directed. |
| 12 | Material & Labour for preparation of new plastered ceiling surfaces one coat of primer paint and applying two coats of white wash complete all as specified and directed. |
| 13 | Material & Labour for preparation of Old plastered surfaces complete removal of existing treatment on Ceiling and applying two coats of white wash complete all as specified and directed. |
| 14 | Dismantling of brick tiles or terracing tiles single layer on roof complete all as specified and directed. |
| 15 | Demolition of Mud in roof any thick ness including plastering and leeping (Whether full thickness removed or only a part therof), complete all as specified directed. |
| 16 | Material & Labour for PCC 1:2:4 type B-1 50 mm thick average (using 20mm graded stone aggregates) mixed with water proofing liquid as in padding, in roof kerb to amintain slop correction of the depressed undraution portion complete all as specified and as directed. |
| 17 | Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete as per manufaturer's instructions all as specified and as directed. |
| 18 | Material and Labour for brick/PCC tiles as required, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in Cement Mortar 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed. |
| 19 | All as per Srl Item No. 18 here-in-before but except brick/PCC tiles. Note:-Old serviceable tiles shall be reused. |
| 20 | Raking out joints/ pointing to brick work or brick/PCC tiles, laid flat, in floors, surface channels, roofs, etc built in cement mortar. |
| 21 | Supply & Fixing in repair 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, incl hacking out complete all as specified directed. |
| 22 | Material & Labour for preparation of New steel surface of any description not other wise described, over 10Cement Mortar width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified directed. |
| 23 | Material & Labour for painting to New wooden surface of any description not other wise described, over 10 Cement Mortar width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc,complete all as specified directed. |
| 24 | S & F 110 mm PVC (SWR) pipe single socket in any length with rubber ring joints fixed in walls,complete all as specified directed. |
| 25 | S & F for 110 mm PVC (SWR) bend any radius joints fixed in walls, complete all as specified directed. |
| 26 | S & F PVC (SWR) vent cowel equal or unequal for 110mm dia bore including,jointing with solvent cement, complete all as specified and directed. |
| 27 | M & L PVC (SWR) gully trap 125mm /110mm including, setting and jointing with solvent cement etc complete all as specified and directed. |
| 28 | S & F fixed in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples , complete all as specified directed. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but not exc. 4 sqm each, complete all as specified directed. |
| 30 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each completed all as specified and directed by EIC. |
| 31 | S & F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and directed. |
| 32 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheeets for top rail locj rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling ofg plain colour PVC sheets to be foitted in the MS frame wwelded/sealed to the stiles and rails with solvent cement all as specified and shown on drg,complete all as specified directed. |
| 33 | Material and labour in repair for factory made Box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1020/08 SH 1/3 to 3/3 dated 01 may 2008 complete all as specified and directed as follows:-(a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf(c) MS tower bolt 150mm long - 02 Nos per leaf(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf(e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10Cement Mortar c/c fixed horizontly (h) 3mm thick clear glass sheet 3 Nos per leaf glazing with oil putty(i) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leafNote :- Including taking down old steel / wooden window including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in Cement Mortar 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately. |
| 34 | Material and labour in repair for factory made Box type steel vetilator made of ERW hollow P-Section size 60 mm x 25 mm, Single rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1019/08 SH 1/3 to 3/3 dated 01 may 2008 complete all as specified and directed as follows:-Note :- Including taking down old steel / vetilator including hold fast PCC 1:2:4 type B0 (four No’s for Each ventilator) & around required plaster in Cement Mortar 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately. |
| 35 | Supply & Fixing factory made Presed steel frames for doors Size of frame 105 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate, and including packing of PCC 1:2:4 type B0 inside the frame etc complete as specified directed. |
| 36 | Supply & Fixing factory made 30 mm thick Flush shutters , solid core construction , with block board core and covered with 0.50 mm thick laminate on both side wood grain texture with lipping to match, complete all as specified and directed. |
| 37 | S & F butt hinges 100mm, medium weight, cold rolled mild steel and fixed, complete all as specified directed. |
| 38 | S & F 100mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified directed. |
| 39 | Supply & Fixing 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified directed. |
| 40 | Supply & Fixing fixed 250 mm Aluminium alloy, anodised, sliding door bolts with hasp and stapple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified directed. |
| 41 | S & F fixed in repair Aluminium (extruded Section body) door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified directed. |
| 42 | Supply & Fixing 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor and fixed,complete all as specified directed. |
| 43 | Supply & Fixing fixed in repair Hat pegs soat hooks Aluminium solid body, 175 mm to 250 mm and fixed, completed all as specified and directed. |
| 44 | S & F Fixed in repair Curtain rails harrison rails steel chromium plated with fixing brackets stop roller etc completed all as specified and directed. |
| 45 | Supply & Fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and fixed, complete all as specified and directed. |
| 46 | S & F fixed in repair aluminium andosed tubular towel rail, 20 mm dia D type , 60 Cement Mortar long between flanges, complete all as specified directed. |
| 47 | Supply and Fixing in repair of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately complete all as specified directed. |
| 48 | Supply only PVC valveless, syphonic action type 10.00 ltrs flushing cistern, low level white with inlet, ball valve, float and handle including brackets, completed all as specified and directed. |
| 49 | Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover). Complete all as specified directed. |
| 50 | Supply and fixing in repair Chromium plated Health faucet in repairs with 1.5 metre long chain, complete all as specified directed. |
| 51 | Supply and Fixing in repairs glass shelve assembly 60Cement Mortar in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail, complete all as specified directed. |
| 52 | Supply and Fixing in repair Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing. |
| 53 | Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed. |
| 54 | Supply & Fixing in repair PVC Connections 15mm size with PTMT nuts of length 450mm, completed all as specified and directed. |
| 55 | Supply & Fixing fixed in repair 15mm bore bib taps cast copper alloy with crutch or butterfly handle screwed down ,screwed for iron pipe or brass ferrule completed all as specified and directed. |
| 56 | Supply & Fixing in repairs 15mm bore stop valve fancy type chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including extra CP nipple wherever required. all as specified and directed. |
| 57 | Supply & Fixing fixed in repair 15mm Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for uniuns and fixed, completed all as specified and directed. |
| 58 | Supply & Fixing Fixed in repair 15mm bore fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long screwed for iron pipe completed all as specified and directed. |
| 59 | Supply & Fixing fixed in repair 20 mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified directed. |
| 60 | Supply & Fixing in repair rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including dismantling old water tanks, complete all as specified directed. |
| 61 | Supply & Fixing fixed in repair vitrous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, PVC watse pipe 32 or 40mm bore 60 Cement Mortar long complete all as specified directed. |
| 62 | Supply & Fixing Galvanised steel water Tubes 15 mm Dia, medium grade', galvanised,with all fitting; and fixed, including taking down the existing pipe to wall and ceiling and laid to floor, complete all as specified directed. |
| 63 | Supply & Fixing Galvanised steel water Tubes 20 mm Dia, medium grade', galvanised,with all fitting; and fixed including taking down the existing pipe to wall and ceiling and laid to floor, complete all as specified directed. |
| 64 | Material & Labour in repair for 20mm thick screed bed or bedding layer of mortar for laying floor finishes in Cement Mortar 1:4 complete all as specified and directed. |
| 65 | Material & Labour in repair 100mm thick plain Cement Mortarent concrete 1:4:8 type B-2 using 40mm graded crushed stone aggregate) as in floor complete all as specified and directed. |
| 66 | Material & Labour in repair for chequered cement concrete tiles 20Cement Mortarx20Cement Mortarx25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment, complete all as specified and directed. |
| 67 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc, complete all as specified and directed. |
| 68 | Material & Labour Brick work with sub class \\"B\\" bricks, straight or curved on plan exc 6 m mean radius , built in Cement Mortar 1:4 , complete all as specified and directed. |
| 69 | Material & Labour 75 mm thick, plain cement concrete 1:3:6, type C-1 using 20 mm graded mechaically crused stone aggregates, laid in 1:20 slop as in Plinth protection/paving/shafts including making joints at 3.00 mtrs intervals and at each corner, the joint shall be filled with mastic filling to full depth) comprising of one partheated hot below bitumen 85/25, two parts heated sand (by volume), surface fininshed even and smoot witout using extra cement complete all as specified. Note : The concrete shall be laid at a strech not exceeding 3 mtr in legth and width of joint shall not more than 12mm complete all as specified directed. |
| 70 | Supply & Fixing in repair 20mm float valves high pressure of PTMT with epoxy coated aluminium rod and high densit plastic ball screw for iron pipe or brass ferrle completed all as specified and directed. |
| 71 | Supply & Fixing in repair Anodised aluminium frame for doors powder coated (minimum thickness of powder coating shall not be less than 50 micron),windows,ventilators,side hunge one or more rebates including necessary jointing cleats,glazing clips complete all as specified and directed |
| 72 | Supply & Fixing in repair Anodised aluminium door shutters powder coated (minimum thickness of powder coating shall not be less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifiedNote : Each panel shall be measured separetely. Glass pane shall be measured and paid separetely. |
| 73 | Supply & Fixing in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed make-Godrej |
| 74 | Supplying and fixing 5.5mm thick ordinary sheet glass and glazing with EPDM / neoprene rubber packing, anodised aluminium snap beading, in squares exc 0.50 Sqm in each panes complete all as specified. |
| 75 | Materal and labour for PCC 1:1.5:3 type using A0 using 12.5 mm graded stone aggregate for repair of chajja, facia, parapets etc using chiken wire mess upto height upto 8 mtr height inclding necessary form work, scaffolding and applying two coats of cement base paint over a coat of primer over cement plaster 1:4 complete allas specified and directed. |
| 76 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and directed. |
| 77 | Material & Labour for 25 mm thick Cement Concrete 1:2:4 type B0, (12.50 mm graded aggregate) as in flooring complete all as specified and directed. |
| 78 | Material & Labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including ,cutting and mirror polishing and 15 mm thick screed bed or bedding layer for laying floor finishes in Cement Mortar 1:3 complete all as specified and directed |
| 79 | Takingdown Shutters of any description exc 4 sqm each (Old rolling shutter) all as specified and directed. |
| 80 | Supply & Fixing 1.25mm thick steel rolling shutters, with out ball bearing , as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete, but gear operated type with bevel gear box and crank handle, etc, complete all as specified directed. S & F 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete, but gear operated type with bevel gear box and crank handle,etc,complete all as specified directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender