Tender For Provision Of Soundproofing Of Certain Rooms Along With Connected Works At Afs Tezpur
Tender Value
43.68 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
0 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Soundproofing Of Certain Rooms Along With Connected Works At Afs Tezpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Jul-2026 | Amendment to PS | Other | 09-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for sound proofing panelling on wall with 600 x600mm, fully perforated 10mm thick Gypsum board having fibre reinforced (board weight approx 3.25kg/piece) reverse of the board incorporates an acoustic fleece to provide sound absorpation installed on aluminium extruded sections of size 50x25mmx1.5mm thick in both horizontal and vertical direction at 600mm c/c spacing. Fixing acoustic material in aluminium frame/partition to fill 100mm air gap by fixing, 25mm thic Glasswool of approved make having density 24kg/cum, 50mm rockinsul by Rockwool India having density 48kg/cum, 25mm of polyster non waven wadding of density 24kg/cum, blanket wrapped in RP tissue and 3.5mm of mass loaded vinyle suitably alongwith 10mm air bubble insulation. Finished the external/front surface of Gypsum board by fixing fabric acoustic and fire resistant panels of any colour and size (2400x600, 1800 x 600, 600x600) as approved by Engr-in-Charge and fixing with help of frame work, providing a minimum sound absorpation of level 0.90 NRC, complete all as specified and as directed. (Note: - All the materials shall conform to relevant IS) |
| 2 | Supply and fixing factory made \\"Acoustic window\\" casement (Openable) type made of toughened DGU glass (6+10+6) filled with argon Gas of acoustic glass 34 having an STC rating up to 45 as per IS: 9901-III/ ISO: 140/ ASTM90/413. Glass panels joints and sides to be sealed with acoustic silicon sealant. Window frame made with uPVC profile 60mm casement series, frame consist of high impact modifed grade uPVC, wall thickness of profile must be minimum 1.8+0.3mm, making arrangement for fixing of all hardware, EPDM gasket. +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete all as directed by Engr-in-Charge. The rate are included for supply and fixing of all other necessary accessories i.e casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system, complete all as specified and directed. |
| 3 | Supply and fixing \\"Acoustic window\\" fixed type made of toughened DGU glass (6+10+6) filled with argon Gas of acoustic glass 34 having an STC rating up to 45 as per IS: 9901-III/ ISO: 140/ ASTM90/413. Glass panels joints and sides to be sealed with acoustic silicon sealant. Window frame made with uPVC profile 60mm casement series, frame consist of high impact modifed grade uPVC, wall thickness of profile must be minimum 1.8+0.3mm, making arrangement for fixing of all hardware, EPDM gasket. +0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete all as directed by Engr-in-Charge. The rate are included for supply and fixing of all other necessary accessories like handle, locking arrangement etc., complete all as specified and directed. |
| 4 | Supply and fixing factory made \\"Acoustic door\\" casement (Openable) single/double leaf type made of toughened DGU glass (6+10+6) filled with argon Gas of acoustic glass 34 having an STC rating up to 45 as per IS: 9901-III/ ISO: 140/ ASTM90/413 made of extruded profile with wall thickness of 2.3mm ( + 0.2mm). Profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners including Hardware like casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated), complete all as specified and directed. |
| 5 | Material and labour 18-20mm thick Granite (jet black colour) stone work (table rubbed and polished) as on horrizontal/vertical surface such as cooking platforms, window cills, steps and like, set in neat grey cement slurry @3Kg/Sqm, laid over and including 15mm thick bedding layer in cement mortar (1:6), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 6 | Hacking out old broken glass of any thickness and any description from Alumninium/ steel frames, and fixing toughened DGU glass (6+10+6) filled with argon Gas including joints and sides of panel of door/window to be sealed with acoustic silicon sealant, complete all as specified and directed. |
| 7 | Taking down aluminium chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete. |
| 8 | Taking down existing door/window of any description including frame exceeding 1.0 Sqm but not exceeding 2.0 Sqm each, and refixing in the same opening/other opening after necessary repair, easing and adusting, jointing replacement/refixing of mongries etc, complete all as specified and directed. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender