Tender For Periodical Services And Misc Repairs At Mpeta Under Age B/R-I Of Ge(Nd), Visakhapatnam
Tender Value
48 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
11 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services And Misc Repairs At Mpeta Under Age B/R-I Of Ge(Nd), Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,and remove the debris out side the MD land all as directed by the Engineer in Charge. |
| 3 | M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4). |
| 4 | M & L for brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6). |
| 5 | Taking down of cement plaster of any description on brick or stone walls,ceiling,chajja,roofprojection etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 6 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement. |
| 7 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions (WPC shall be measured & paid separately). |
| 8 | Supply only liquid water proofing compound of approved quality. |
| 9 | M&L fo Rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement. |
| 10 | M&L For supply and application of pre-batched one component Polymer modifiedprotective Mortar(PMPM) of thickness 12-15mm of Sika Top -122 manufactured by M/s Sika India Pvt Ltd or its equivalent in M/s Fosroc Chemicals India (P) Ltd or M/s STP Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostik India Pvt Ltd for repair of spalling and damaged concrete in RCC Structure and superstructure works including bond coat manufactured by M/s Sika India Pvt Ltd or its equivalent in M/s Fosroc Chemicals India (P) Ltd or M/s STP Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostik India Pvt Ltd or M/s Asian for bonding old and new concrete surfaces, including double scaffolding and safety measures as required and specified necessary tools and machinary, curing, consumables etc. upto 9th floor buildings complete all as per manufacturers instructions as specified and as directed. |
| 11 | M & L for preparation of newly plastered surface and applying two coat of oil distemper emulsion over a coat of alkali resistant primer complete. |
| 12 | M & L for preparation of new external plastered wall surfaces and applying two coats of exterior emulsion weather proof paint [ APEX Ultima or equivalent ] over a coat of primer over the surfaces complete all as specified and directed. |
| 13 | M & L for preparing newly plastered surfaces of ceiling and applying three coats of white wash. |
| 14 | Complete removal of existing treatment and applying two coats of exterior emulsion weather proof coat paint [ APEX Ultima or equivalent ] over a coat of primer on external wall surfaces [ upto 4 th storey ] complete as per manufacturers instructions and all as specified and directed. |
| 15 | Complete removal of existing treatment over wall surfaces applying including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer upto 9 th storey complete all as specified and as directed. |
| 16 | M&L for n exc 3mm thick wall care putty on walls complete all as specified and directed by Engineer-in-charge |
| 17 | M&L preparation of old treated wall surface and applying one coat of oil bound distemper upto 4 th storey complete all as specified and as directed. |
| 18 | M&L preparation of old treated wall surface and applying one coat of Acrylic emulsion upto 4 th storey complete all as specified and as directed. |
| 19 | M&L for preparing old plastered or unplastered surfaces by brooming down and applying one coat of white wash on ceiling |
| 20 | M&L for preparing old plastered or unplastered surfaces by brooming down and applying one coat of white wash on walls complete all as specified |
| 21 | M&L preparation of existing existing treatment and applying one coat of exterior emulsion weather proof coat paint on external wall /ceiling surfaces [ upto 9 th storey ] complete as per manufacturers instructions and all as specified and directed. |
| 22 | M&L for preparing old painted wooden surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 23 | M&L for preparing old painted steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint all as specified |
| 24 | M & L for applying two coat of synthetic enamel paint to old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth including preparation of surfaces all as specified and directed by the Engineer-in-Charge. |
| 25 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided and remove the debris out side the MD land complete all as specified and directed |
| 26 | 40 mm thick PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in floors upto 9th storey complate all as specified and directed |
| 27 | Plain Cement Concrete Type E2 1:5:10 (using 40 mm graded stone aggregate) in sunken floors ,fillling and mass concrete complete all as specified and directed |
| 28 | Rendering 10 mm thick on brick work or concrete surfaces in cement mortar 1: 4 mixed with WPC and finishing the surface even and smooth without using extra cement upto 9th storey complate all as specified and directed (NOTE: Supply only WPC shall be measured and paid separately) |
| 29 | M & L for injecting/ grouting cement slurry mixed with Conbextra EP 10 (Epoxy resin injection grout) of M/s Fosroc Chemicals or equivalent approved chemical in to roof/ sunken slabs of toilet by drilling holes at an interval not more than 1 M c/c to a depth of 60 mm and 20 mm diameter and grouting the slurry by mechanical means with required pressure complete all as per technical specifications and as required at site. |
| 30 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and remove the debris out side the MD land all as specified and directed. |
| 31 | M & L for 50mm thick plain cement concrete type B1, (1:2:4) (using 20 mm graded stone aggregate) in flooring/plinth protection including finishing the surface even and smooth without using extra cement. |
| 32 | M & L for 100 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, finish even and smooth without using extra cement complete all as specified and directed |
| 33 | Dismentling of floor hearth or wall tiling of any description including cement mortar bedding (but not backing),removing serviceable tiles to store & rubbish off the premises |
| 34 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:4) for backing of tiles. |
| 35 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0..11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match. |
| 36 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and over and including a 15 mm thick screed bed of cement mortar (1:6) and pointed with white or Coloured cement to match. |
| 37 | M & L for Coloured Glazed ceramic tiles 300 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in cement morter (1:4) |
| 38 | M&L for Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or Light coloured cement to match including screed bed of 15mm thick in cement mortar 1:6 complete all as specified |
| 39 | M&L 20mm Granite(of any type) work (table rubbed and polished) in flooring,window cills/steps with v groove cutting lines minimum three numbers on thread/landing prtion jambs, pillars, and like in screed bed bedding layer,15 mm thick in cement mortar 1:4 complete all as required site including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade |
| 40 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories). |
| 41 | S&F 110 mm bore PVC (SWR) bends of any radius |
| 42 | S&F 75 mm bore PVC (SWR) bends of any radius |
| 43 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 44 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 45 | S&F 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.including all joints and bends complete |
| 46 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls |
| 47 | Supply only 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers upto 4th floor complete all as specified and directed. |
| 48 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size with 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including removing the existing Basin, pillar tap and brackets and fixing new brackets complete upto 9th storey. |
| 49 | S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm upto 4th floor complete all as specified and directed. |
| 50 | S&F in repairs Plate racks made out of 0.8 mm thick .stainless steel, of size 750x600x 250 mm all as specified and directed upto 9th floor |
| 51 | S & F in repairs Powder coated fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets matching to curtain rod of make as approved by GE upto 4th storey complete all as specified and as directed. [ Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same ] |
| 52 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 53 | S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed upto 9th floor |
| 54 | Hacking out old broken glass (any thickness size quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed upto 9th floor |
| 55 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane upto 9th floor |
| 56 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares exc 0.5 sqm in each pane upto 9th floor |
| 57 | M & L for along the external wall below concrete or masonry spron using chemecal emulsion @ 2.25 ltrs per liners metre incl drilling and plugging holes etc in apron |
| 58 | M & L treatment of soil under existing floors using emulsion @ one lts per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortor 1:2 (1cement : 2sand) to match the existing floors. |
| 59 | M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosine based solution) @ 0.5 litre per hole by drilling 6mm dia holes at downword angle of 45 degree at 150mm centre to centre and sealing the sameupto 12th floor complete all as specified |
| 60 | S & F in repairs 15 mm bore dia.,fancy type Pillar tap of PTMT any colour of minimum weight 110 grams, screwed for iron pipe and fixed upto 9th floor complete all as specified and directed. |
| 61 | S & F in repairs 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete all as directed. |
| 62 | S&F in repairs wash down water closet(pedestal pattern) of any colour including P or S trap and fixing of bolts complete all as specified. |
| 63 | S&F in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern |
| 64 | S&F in repairs plastic WC seat cover any colour pedestal pattern, closed pattern with flat bottom and cover and mild steel shromium plated or aluminised hinging devices complete all as specified. |
| 65 | S & F in repairs Vitreous China Squatting pan, Orissa' pattern, size 580 x 440 mm white with integral foot rests confirming to IS 2556 part II of pettern 1 having P trap complete all as specified and directed. |
| 66 | Taking down chowkats or frames not exc 1.5 sqm each without taking off shutters from the frame upto 9th floor |
| 67 | Taking down shutters of any description n exc 1 sqm each upto 9th floor |
| 68 | Taking down shutters of any description exc 1sqm but n.exc 2 sqm upto 9th floor |
| 69 | Taking down shutters of any description exc 1sqm but n.exc 2 sqm each and refixing in same opening upto 9th floor |
| 70 | S & F to Chowkats 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) upto 9th floor |
| 71 | S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter with lock rail and panel of 9mm BWP Commercial ply or 12mm veneered particle board with commercial face veneers on both faces. the size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated upto 9th floor |
| 72 | S&F factory made solid fixed ventilator of size 50x47mm made out of extruded 5mm thick PVC sheet mitred cut at two corners and joined with 2Nos of 150mm long brakets of 15x15mm MS square tube, the two vertical porfiles are to be reinforced with 19 x 19 mm MS tube and 50% of portion is fixed with 3 mm thick pin headed/frosted glass and remaining portion is covered with wire mesh and 3 mm thick pin headed/frosted glass louvers including 12mm dia MS guard bars and necessary fixtures upto 9h floor. |
| 73 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing up to 9th floor |
| 74 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. upto 9th floor. |
| 75 | S&F Steel cup board shutters Godrej pattern double shutters including frame made of 1 mm thick MS sheet incl stiffners, moulding, bending, welding, necessary fittings and locking arrangement as similar to steel cup board and two coats of spray painting over metal putty incl preparation and primer incl fixing to the existing concrete wall. (Approximate size of the cup board 90 cm x 190 cm measurement to be made in Sqm incl frame) and all as specified. |
| 76 | S&F Steel cup board shelves Godrej pattern made of 1 mm thick MS sheet incl stiffners, moulding, bending, welding, necessary fittings and two coats of spray painting over metal putty incl preparation and primer incl fixing to the existing concrete wall. |
| 77 | S&F Mild steel butt hinges medium weight 125 mm long upto 9th floor |
| 78 | S&F 150 mm aluminium handles, cast type anodised upto 9th floor |
| 79 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section upto 9th floor |
| 80 | S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy upto 9th floor |
| 81 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring upto 9th floor. |
| 82 | S & F in repairs Aluminium (extruded section) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg upto 9th floor. |
| 83 | S& F in repairs rubber beading 50 mm wide and 5 mm thick upto 9th floor. |
| 84 | S & F in repairs 15 mm bore dia.,fancy type bib tap of PTMT any colour of minimum weight 105 grams, screwed for iron pipe and fixed upto 9th floor complete all as specified and directed. |
| 85 | S & F in repairs Bib taps long body, cast copper alloy, 15 mm dia, chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified |
| 86 | S&F in repairs chromium plated grating of size 125mm dia (with hole or without hole) complete all as specified |
| 87 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 88 | M & L in repairs for PVC (SWR) plain Floor/ Nahani trap of 75/110 mm dia., outlet including jointing with solvent cement complete all as specified and directed. |
| 89 | M & L for patch work of area n.exc 0.50 Sqm for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement. |
| 90 | M & L for patch work of area n.exc 0.50 Sqm for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and fair without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions. |
| 91 | M&L for patch work of area n.exc 0.50 Sqm for Rendering 5 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of slab, chajja,roof projection,shelve etc and finished even and smooth without using extra cement. |
| 92 | S&F in repairs PVC flexible waste pipe 32/40 mm dia with socket, 100 cm long for WHB/Sink upto 9th floor. |
| 93 | Providing and fixing factory made GIZA brand single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkat comprising of size 120mm x 50mm Double rebate virgin PVC polymer of K value 58-60 (Suspension Grade), calicium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (Edge), compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category, with property of being termite/borer proof, water/moisture prooof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasterners, of required dia and length complete as per direction of Engineer-in-Charge, (M.S hold fast/lugs or ss dash fasterners shall be paid for separately). |
| 94 | Providing and fixing factory made GIZA brand single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkat comprising of size 100mm x 50mm virgin PVC polymer of K value 58-60 (Suspension Grade), calicium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (Edge), compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category, with property of being termite/borer proof, water/moisture prooof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasterners, of required dia and length complete as per direction of Engineer-in-Charge, (M.S hold fast/lugs or ss dash fasterners shall be paid for separately). |
| 95 | Providing and fixing factory made GIZA brand single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkat comprising of size 62mm x 32mm virgin PVC polymer of K value 58-60 (Suspension Grade), calicium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (Edge), compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category, with property of being termite/borer proof, water/moisture prooof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasterners, of required dia and length complete as per direction of Engineer-in-Charge, (M.S hold fast/lugs or ss dash fasterners shall be paid for separately). |
| 96 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc and remove the debris out side the MD land . |
| 97 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, set and jointed in CM (1:4) with grey cement and pigment complete all as specified and as directed. |
| 98 | M&L for for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. |
| 99 | M&L Chequred Cement concrete tiles 300 mm x 300 mm x22mm thick, machine pressed with grey cement and pigment; set, jointed and poin ted in net cement shurry in floors, and cut and polished including 15mm thick screed bed in CM 1:6 complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 days