Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | REPAIRS TO STEEL FURNITURES:- General Note to all items mentioned below: The repairs to furniture items shall be done in accordance with BOQ, particular Spn and drawing. The exact dimensions of furniture shall favourably be matched after the repair work, single item of furniture may require multiple BOQ items for completing the entire repair works. However while doing the repair work any small repair work which are essential for the repair work shall deemed to be included in the unit rate quoted to get the furniture in its original design and dimensions. The tenderers are fully be aware of the design of furniture exact repair work to be carried out etc as the category of work mentioned in the NIT is d(i) furniture enlisted contractors. |
| 2 | BED PLYWOOD TOP (FD-246, 247) |
| 3 | Removing existing unserviceable / broken long rail and s & F new 1st class teak wood long rail as per the dimension shown on drg complete all as specified and directed. |
| 4 | Removing existing unserviceable / broken stiffener and S & F new 1st class teak wood stiffener as per the dimension shown on drg complete all as specified and directed. |
| 5 | Removing existing unserviceable / broken head rest completely and S & F new head rest alongwith teak wood frame complete to match with the existing as per the dimension shown on drg complete all as specified and directed. |
| 6 | Removing existing unserviceable / broken food board completely and S & F new foot board along with teak wood frame complete to match with the existing as per the dimension shown on drg complete all as specified and directed. |
| 7 | Removing existing unserviceable / broken plywood carefully and S & F 12mm thick BWR grade plywood commercial of size 6'x 3' fixed with suitable screws as per the dimension shown on drg complete all as specified and directed. |
| 8 | Scratching & making the entire wooden surface of Bed with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 9 | BIN LINEN MULTIPURPOSE,FD/E6/MAP/09 |
| 10 | Top of size 1200mm x 450mm made out of 18mm thick prelaminated HDHMR board exterior grade of existing shade with edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive fixed to sides with piano hinge as per drg. |
| 11 | Back of size 1200mm x 675mm made out of 12mm thick BWR plywood fixed with sides and top with adhesive and neadless nails as per drg. |
| 12 | Door Shutter of size 637mmx400mm made of 18mm thick prelaminated HDHMR board exterior grade of existing shade with edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive fixed to sides with piano hinge as per drg. |
| 13 | Door Shutter of size 518mmx400mm made of 18mm thick prelaminated HDHMR board exterior grade of existing shade with edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive fixed to sides with piano hinge as per drg. |
| 14 | Sides of size 637mmx450mm made of 18mm thick prelaminated HDHMR board exterior grade of existing shade with edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive as per drg. |
| 15 | Front face of drawer of size 450mmx100mm made of 18mm thick prelaminated HDHMR board exterior grade of existing shade with top edge duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive as per drg. |
| 16 | Bottom ply of drawers of size 450mmx400mm made out of 6mm plywood BWR fixed with adhesive and headless nail as per drg. |
| 17 | Sides of drawers of size 100mmx400mm made out of 18mm thick prelaminated HDHMR board exterior grade of existing shade with top edge duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive as per drg. |
| 18 | Handles of size 100mm long 8mm dia chrome plated shall be fixed using internal metal screws |
| 19 | Magnetic catchers fixed inside shutter with screws as per drg. |
| 20 | Complete base frame with legs of overall size 1164mmx75mmx20mm made of 1st class teak wood member in lieu of prelaminated particle board duly fixed by using metal screws and adhesive and duly polished by Scratching & making the entire wooden surface of Bed with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 21 | Shelf of size 800mmx400mm made out of 18mm thick prelaminated HDHMR board exterior grade of existing shade with top edge duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive as per drg. |
| 22 | CHARPOY WITH PLYWOOD TOP, FD-227 |
| 23 | Removing existing unserviceable / broken long rail and s & F new 1st class teak wood long rail as per the dimension shown on drg complete all as specified and directed. |
| 24 | Removing existing unserviceable / broken short rail and s & F new 1st class teak wood Short rail as per the dimension shown on drg complete all as specified and directed. |
| 25 | Removing existing unserviceable / broken stiffener and s & F new 1st class teak wood stiffener as per the dimension shown on drg complete all as specified and directed. |
| 26 | Removing existing unserviceable / broken legs and s & F new legs as per the dimension shown on drg complete all as specified and directed. |
| 27 | Removing existing unserviceable / broken plywood carefully and S & F 12mm thick BWR grade plywood commercial fixed with suitable screws as per the dimension shown on drg complete all as specified and directed. |
| 28 | Scratching & making the entire wooden surface of charpoy with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 29 | BOOK CASE, FD-237 / 355 |
| 30 | Removing existing unserviceable / broken top and s & F new top made of 18mm thick Prelaminated HDHMR board with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveas per the dimension shown on drg complete all as specified and directed. |
| 31 | Removing existing unserviceable / broken door shutter and s & F new door shutter with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveof same shade as per the dimension shown on drg complete all as specified and directed. |
| 32 | Removing existing unserviceable / broken 6mm thick back ply and s & F new 6mm thick back ply as per the dimension shown on drg complete all as specified and directed. |
| 33 | Removing existing unserviceable / broken shelves and s & F new shelves made of 18mm thick Prelaminated HDHMR board with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveas per the dimension shown on drg complete all as specified and directed. |
| 34 | Removing existing unserviceable / broken bottom carefully and S & F new bottom made of made of 18mm thick Prelaminated HDHMR board with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveall as specified and directed. |
| 35 | CHAIR DINING ,FD-279, 228, FD/MAP-II/05 |
| 36 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg. |
| 37 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg. |
| 38 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg. |
| 39 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg. |
| 40 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg. |
| 41 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails. |
| 42 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. |
| 43 | Removing the existing unserviceable PVC seat and supply and fixing new pvc seat of ivory colour 1st quality. |
| 44 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment. |
| 45 | CHAIR DINING LONG BACK ,FD/E6/MAP/10 and FD/MAP-II/04 |
| 46 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg. |
| 47 | Removing the old unserviceable Teak wood vertical stiffener and supply and fixing new Teak wood vertical stiffener of 1st class teak wood as per drg. |
| 48 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg. |
| 49 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg. |
| 50 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg. |
| 51 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails. |
| 52 | Removal the old unserviceable seat by unscrewing from bottom ,Supply and fixing new seat made of 40 density cool foam 75mm thick fixed on 12mm thick BWR plywood duly covered with best quality tapestry cloth of not less than Rs 450 per meters with standard workmanship using white muslin cloth at bottom.The tapestry cloth shall be fixed to bottom ply with pressure hydraulic stapler pins.The seat after upholstery shall be fixed within /over the wooden frame by using black gypsum screws from beneath through corner brackets. |
| 53 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment. |
| 54 | CHAIR EASY,FD-229 :- |
| 55 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg. |
| 56 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg. |
| 57 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg. |
| 58 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg. |
| 59 | Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg. |
| 60 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails. |
| 61 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat and back shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. |
| 62 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment. |
| 63 | CHAIR WRITING,FD-280,250 |
| 64 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg. |
| 65 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg. |
| 66 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg. |
| 67 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg. |
| 68 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg. |
| 69 | Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg. |
| 70 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails. |
| 71 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. |
| 72 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment. |
| 73 | CHAIR WOODEN BOTTOM W/O ARM, FD-225 |
| 74 | Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg. |
| 75 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg. |
| 76 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg. |
| 77 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg. |
| 78 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg. |
| 79 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails. |
| 80 | Removing the existing unserviceable/broken seat of chair without disturbing the adjacent parts ,supply and fixing 6 mm thick one side teak face ply for seat .The seat ply shall be provided with 4mm dia holes 08 in nos at centre and shall be fixed with screws from top. |
| 81 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment. |
| 82 | CHAIR EASY CUSHIONED, FD-358 :- |
| 83 | Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg. |
| 84 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg. |
| 85 | Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg. |
| 86 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg. |
| 87 | Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg. |
| 88 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails. |
| 89 | Removing the existing unserviceable torn cushions from each seat and back and Supply and fix 40 density ,100mm thick foam cushion duly covered with inner linen cloth and best tapestry cloth not less than Rs 450 per metre of approved color and shade.. |
| 90 | Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment. |
| 91 | TABLE DRESSING GENTS :-FD- 230 |
| 92 | S & F new looking mirror of size 760mm x 380mm with thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A .Complete all as specified and as shown on drawing. |
| 93 | S & F new top of size 900mmx300mm to the table dressing gents made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 94 | S & F new sides of size 150mmx300mm to the table dressing gents made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 95 | S & F new bottom of size 900mmx300mm to the table dressing gents made out of 12mm thick BWR-grade-A plywood.Complete all as specified and as shown on drawing |
| 96 | S & F new back of size 900mmx150mm to the table dressing gents made out of 12mm thick BWR -grade-A plywood. Complete all as specified and as shown on drawing |
| 97 | S & F new vertical members at back of mirror of size 35mmx25mm made out of teak wood .Complete all as specified and as shown on drawing |
| 98 | S & F drawer made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade duly providing 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveon top and base of 6mm BWR plywood including chrome plated 30mm dia decorative knob to each drawer.Complete all as specified and as shown on drawing |
| 99 | Polishing to dressing table gents with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.. |
| 100 | DRESSING MIRROR GENTS, FD/E6/MAP/16 |
| 101 | Removing old unserviceable mirror and S&F new Mirror as per drg |
| 102 | Removing old unserviceable glass shelf and S&F new glass shelf as per drg |
| 103 | Removing old unserviceable sides and S&F new sides made of 18mm thick prelaminated HDHMR board as per drg |
| 104 | Removing old unserviceable back and S&F new back made of BWR Plywood 12mm thick duly fixed with keyhole (02 Nos) and rest as per drg |
| 105 | Polishing to dressing table gents with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.. |
| 106 | TABLE CENTRE ,FD-274 |
| 107 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 108 | Legs of size 400mmx30mmx60mm made of 1st class teak wood as per size on drg |
| 109 | Top long rail of size 900mmx20mmx50mm made of 1st class teak wood as per size on drg |
| 110 | Top short rail of size 450mmx20mmx50mm made of 1st class teak wood as per size on drg |
| 111 | Bottom Rail of size 450mmx20mmx50mm Short Stiffener made of 1st class teak wood as per size on drg |
| 112 | Centre stiffener of size 900mmx20mmx50mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood |
| 113 | Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws. |
| 114 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 115 | BOOK CASE SMALL ,FD-237 |
| 116 | Top of size 1200mmx300mm made out of 18mm thick prelaminated HDHMR board exterior grade (ISI Marked) as per existing shade with edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive. |
| 117 | Sides of size 660mmx300mm made out of 18mm thick prelaminated HDHMR board exterior grade (ISI Marked) as per existing shade with edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive |
| 118 | Base of size 1200mmx300mm made out of 18mm thick prelaminated HDHMR board exterior grade (ISI Marked) as per existing shade with edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive |
| 119 | Back ply of size 1200mmx660mm BWR 6mm thick fixed with adhesive and headless nails |
| 120 | Shelves of size 380mmx205mm made out of 18mm thick prelaminated HDHMR board exterior grade (ISI Marked) as per existing shade with edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive |
| 121 | Knob chrome plated 30mm dia. |
| 122 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 123 | TABLE PEG ,FD-236/277/384 |
| 124 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 125 | Legs of size 362mmx30mmx50mm made of 1st class teak wood as per drg |
| 126 | Top long rail of size 450mmx20mmx40mm made of 1st class teak wood as per drg |
| 127 | Bottom side rail of size 300mmx20mmx40mm made of 1st class teak wood as per drg |
| 128 | Bottom Stiffener of size 450mmx20mmx40mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood |
| 129 | Corner shape wooden bracket of size 75mmx75mmx20mm shall be fixed to legs and rail with adhesive and screws. |
| 130 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 131 | TEAPOY WOODEN,FD-232 & 278 |
| 132 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 133 | Legs of size 520mmx60mmx30mm made of 1st class teak wood as per size on drg |
| 134 | Top long rail of size 600mmx 50mmx20mm made of 1st class teak wood as per size on drg |
| 135 | Bottom rail of size 450mmx50mmx20mm made of 1st class teak wood as per size on drg |
| 136 | Long Stiffener of size 600mmx20mmx50mm in between two bottom rails irrespective of what is shown in drg ,made of 1st class teak wood. |
| 137 | Corner shape wooden bracket of size 75mmx75mmx20mm thick shall be fixed to legs and rail with adhesive and screws. |
| 138 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 139 | TABLE DINING FOR 6 PERSONS:-FD-273 ,FD/MAP-II/03 |
| 140 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 141 | Legs of size 760mmx40mmx75mm made of 1st class teak wood as per size on drg |
| 142 | Top long rail of size 1500mmx25mmx100mm made of 1st class teak wood as per size on drg |
| 143 | Top short rail of size 900mmx25mmx100mm made of 1st class teak wood as per size on drg |
| 144 | Top centre stiffener rail of size 900mmx25mmx100mm made of 1st class teak wood as per size on drg |
| 145 | Corner Shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws. |
| 146 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 147 | TABLE DINING FOR 8 PERSONS:-FD-376 |
| 148 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 149 | Legs of size 760mmx60mmx60mm made of 1st class teak wood as per size on drg |
| 150 | Top long rail of size 1440mmx25mmx100mm made of 1st class teak wood as per size on drg |
| 151 | Top short rail of size 1020mmx25mmx100mm made of 1st class teak wood as per size on drg |
| 152 | Top centre stiffener rail of size 1020mmx25mmx100mm made of 1st class teak wood as per size on drg |
| 153 | Corner Shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws. |
| 154 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 155 | TABLE WRITING :-FD- 275 |
| 156 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 157 | Top Long rail of size 740mmx25mmx50mm made of 1st class teak wood as per drg |
| 158 | Top Short rail of size 600mmx25mmx50mm made of 1st class teak wood as per drg |
| 159 | Back ply of size 596mmx400mm made of 6mm plywood as per drg |
| 160 | Bottom stiffener of size 1145mmx25mmx50mm in between two short stiffeners irrespective of what is shown in drg ,made of 1st class teak wood |
| 161 | Sides of compartment of size 592mmx600mm made out of 18mm thick prelaminated HDHMR board exterior grade (ISI Marked) of existing shade with edges duly covered with 2mm thick PVC Beading |
| 162 | Shutter of compartment of size 490mmx370 made out of 18mm thick prelaminated HDHMR board exterior grade (ISI Marked), natural teak color duly fixed with piano hinges and edges duly covered with 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveby using 100mm long stainless steel hinge. |
| 163 | Front face of drawers of size 120mmx370mm made out of 18mm thick prelaminated HDHMR board exterior grade (ISI Marked) of existing shade with edges duly covered with 2mm thick PVC Beading |
| 164 | Bottom ply of drawers of size 370mmx540mm made out of 6mm plywood BWR fixed to side ply in groove as shown in drg. |
| 165 | Sides of drawers of size 120mmx540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood |
| 166 | Legs of size 740mmx35mmx55mm made of 1st class teak wood as per drg |
| 167 | Handle of size 100mm long chrome plated. |
| 168 | Corner shape wooden bracket of size 100mmx100mmx25mm thick shall be fixed to legs and rail with adhesive and screws. |
| 169 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 170 | TABLE DRESSING LADIES WITH MIRROR :-FD- 251, 378 |
| 171 | Removing old unserviceable mirror and S & F new looking mirror of size 1220 x 366mm of thickness 5mm. The back of mirror shall be supported by providing 6mm thick BWR -grade-A .Complete all as specified and as shown on drawing. |
| 172 | Removing old unserviceable top and S & F new top made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveat front. Complete all as specified and as shown on drawing |
| 173 | Removing old unserviceable sides and S & F new sides of size made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveat front. Complete all as specified and as shown on drawing |
| 174 | Removing old unserviceable bottom and S & F new bottom made out of 18mm thick BWR-grade-A plywood.Complete all as specified and as shown on drawing |
| 175 | Removing old unserviceable back and S & F new back made out of 12mm thick BWR -grade-A plywood. Complete all as specified and as shown on drawing |
| 176 | Removing old unserviceable glass and S & F sliding plain glass of 5mm thickness supported on dual run aluminium channel 5mm thick shutters Complete all as specified and as shown on drawing |
| 177 | Removing old unserviceable drawer and S & F new drawer made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade duly providing 4mm thick teak wood beading on top and base of 6mm BWR plywood including chrome plated 30mm dia decorative knob to each drawer.Complete all as specified and as shown on drawing |
| 178 | Removing old unserviceable long stiffener and S & F new long stiffener made out of first class hard wood teak.Complete all as specified and as shown on drawing |
| 179 | Removing old unserviceable short stiffener and S & Fnew short stiffener made out of first class hard wood teak.Complete all as specified and as shown on drawing |
| 180 | Removing old unserviceable legs and S & F new legs made out of first class hard wood teak.Complete all as specified and as shown on drawing |
| 181 | Removing old unserviceable vertical members and S & F new vertical members at back of mirror 45mm x 40mm made out of teak wood .Complete all as specified and as shown on drawing |
| 182 | Polishing to dressing table ladies with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment.. |
| 183 | DRESSING TABLE MAP (FD/MAP-II/07) |
| 184 | S & F new looking mirror of required size with thickness 5mm .The back of mirror shall be supported by providing 6mm thick BWR -grade-A .Complete all as specified and as shown on drawing. |
| 185 | S & F new top to side compartments of size made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 186 | S & F new back to table dressing made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 187 | S & F new sides to side compartments made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 188 | S & F new bottom to each side compartments made out of 12mm thick BWR-grade-A plywood.Complete all as specified and as shown on drawing |
| 189 | S & F new complete drawer to side compartments made out 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 190 | S & F new shutters to side compartments made out 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 191 | S & F new chrome plated handles of size 100mm long to drawer and shutter.Complete all as specified and as shown on drawing |
| 192 | Polishing to dressing table with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. |
| 193 | STOOL OF DRESSING TABLE , FD/MAP-II/07 |
| 194 | S & F new openable shutter to stool made of 12mm thick BWR plywood of grade-A duly fitted with recessed type drawer pull folding handle of size not less than 75mmx37mmx4mm .Complete all as specified and as shown on drawing. |
| 195 | S & F new sides to stool made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging alround. Complete all as specified and as shown on drawing |
| 196 | S & F new bottom to stool made out of 6mm thick BWR plywood. Complete all as specified and as shown on drawing |
| 197 | S & F new 50mm dia twin wheel castor wheel of heavy duty duly fixed with 20mm long screw .Complete all as specified and as shown on drawing |
| 198 | S & F new wooden runners of size 20mmx20mm inside the stool as sown in drg .Complete all as specified and as shown on drawing |
| 199 | S & F new seat of stool made to shape of 75mm thick 40 density PU foam duly covered with best qulaity tapestry cloth of rate not less than 400 per mtr .Complete all as specified and as shown on drawing |
| 200 | Polishing to stool dressing MAP with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. |
| 201 | SIDE BOARD,FD-241/372 |
| 202 | S & F new top to Side Board made out of 18mm thick HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 203 | S & F new sides to Side Board made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 204 | S & F new centre partition to Side Board made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 205 | S & F new back to Side Board made out of 6mm thick BWR plywood. Complete all as specified and as shown on drawing |
| 206 | S & F new shelf to Side Board made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 207 | S & F new sides to drawers made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at top edge. Complete all as specified and as shown on drawing |
| 208 | S & F new front face of drawer made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at top edge. Complete all as specified and as shown on drawing |
| 209 | S & F new bottom ply 6mm to drawer made out of 6mm thick BWR plywood including 4mm thick teak wood edging at top edge. Complete all as specified and as shown on drawing |
| 210 | S & F new drawer to Side Board made of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade with 6mm thick plywood at bottom including 4mm thick teak wood edging at front.Complete all as specified and as shown on drawing |
| 211 | S & F new leg to base frame of Side Board made out of section 45mmx45mm of teak wood.Complete all as specified and as shown on drawing |
| 212 | S & F new shutters alongwith hinges to Side Board made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesiveedging at front. Complete all as specified and as shown on drawing |
| 213 | S & F new 30mm dia chrome plated decorative knob to drawer and shutter.Complete all as specified and as shown on drawing |
| 214 | Polishing to side board with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. |
| 215 | TABLE BED SIDE (MAP) ,FD/E6/MAP/15(R) |
| 216 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 217 | S & F new sides with teak wood beading made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 218 | S & F new Upper drawer made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 219 | S & F new Back ply 6mm BWR. |
| 220 | S & F new lower drawer made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 221 | S & F new top upper back made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade including 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 222 | S & F new handles 75mm long chrome plated of dia 8mm fixed with suitable screws. |
| 223 | Painting to steel frame of table bed side steel with one coat of synthetic enamel paint of existing color after cleaning,dusting and scratching the iron surface with sand emery paper. |
| 224 | WORK STATION (CURVILINEAR) OF SIZE 1200 x 1350 x 1350/750mm , TP |
| 225 | S & F new top made out of 18mm thick HDDMR board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate of existing shade on both sides & 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on all exposing sides with strong bonded chemical adhesive through hot pressed machine complete. |
| 226 | S & F new sides made out of 18mm thick Prelaminated HDHMR board [ISI Marked] exterior grade existing shade & 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on all exposing edges with strong bonded chemical adhesive through hot pressed machine complete. |
| 227 | S & F new Tapestry cloth of exisiting shade duly pinned and tucked over existing Board |
| 228 | S & F new Front Panel made out of 18mm thick Prelaminated HDHMR board [ISI Marked] exterior grade existing shade & 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on all exposing edges with strong bonded chemical adhesive through hot pressed machine complete. |
| 229 | S & F Best Quality Castor Wheel of 50mm Size duly fixed underneath Mobile Pedestal |
| 230 | S & F new drawers made of HDHMR Board[ISI Marked] exterior grade existing shade & 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on all exposing edges with strong bonded chemical adhesive through hot pressed machine and alongwith good quality telescopic channel duly fixed in mobile pedestal. |
| 231 | Handles of size 100mm long D Type 8mm dia chrome plated shall be fixed using internal metal screws |
| 232 | SOFA SINGLE SEAT FD-281 |
| 233 | Removing old, supply and fixing new leg of size 70mmx35mmx515mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed. |
| 234 | Removing old, supply and fixing new arm of size 70mmx35mmx745mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed. |
| 235 | Removing old, supply and fixing new batten made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed. |
| 236 | Removing old, supply and fixing new front rail of size 40mmx40mmx570mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed. |
| 237 | Removing old, supply and fixing new side rail of size 100mmx35mmx625mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed. |
| 238 | Removing old, supply and fixing new rail to back frame of size 70mmx35mmx530mm made of 1st class teak wood using screws only with proper workmanship.complete all as specified ,shown on drawing and as directed. |
| 239 | Taking out old pressed /torn cushions from each set and Supply of 40 density ,100mm thick foam cushion of size 520mmx560mmx100mm duly covered with inner linen cloth and best tapestry cloth not less than Rs 450 per metre of approved color and shade. Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting.Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard .Make of Foam 40 density-Kurlon-goldline plus/Sleepwell-primo/U-foam |
| 240 | Scratching the entire wooden pallets of sofa with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine only.Make of french polish-Asian paints/Berger paints |
| 241 | CUSHION FOR SOFA SET 5 SEATER, FD-281, FD/MAP-II/02 |
| 242 | Taking out old pressed /torn cushions from each set and Supply of 40 density ,100mm thick foam cushion of size 560mmx530mmx100mm duly covered with inner linen cloth and best tapestry cloth not less than Rs 550 per metre of approved color and shade. Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting.Tapestry cloth:- It shall be heavy linen look fabric ,plain velvet fabric or as per approved sample placed in BSO yard .Make of Foam 40 density-Kurlon-goldline plus/Sleepwell-primo/U-foam |
| 243 | SOFA 5 SEATER WOODEN, TP |
| 244 | Removing old unserviceable cushion / tapestry cloth and providing new foam cushion for both seat and back made of multilayer thickness of 100mm, 40mm 40 density and stictched with belt duly covered with malmal cloth and heavy linen look fabric tapestry / leatherette cloth of minimum cost of rs. 450 per mtr duly stitched and on all exposed surfaces of wood shall be polished after preparing the surface with sand paper as per the dimension shown on drawing complete all as specified and directed. The shade of tapestry cloth / letherette shall be approved by GE. |
| 245 | Scratching the entire wooden pallets of sofa with sand emery paper of various grit , filling the pores with wood filler to make good the surface,After prepartion of surface the entire sofa chair shall be polished in french finish in high gloss with spary machine only.Make of french polish-Asian paints/Berger paints |
| 246 | TABLE 3' X 2' WITHOUT DRAWER;- FD-231/284 |
| 247 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 248 | Legs of size 760mmx30mmx60mm made of 1st class teak wood as per size on drg |
| 249 | Top long rail of size 900mmx20mmx60mm made of 1st class teak wood as per size on drg |
| 250 | Top Short rail of size 600x20mmx60mm made of 1st class teak wood as per size on drg |
| 251 | Bottom rail of size 600mmx20mmx60mm made of 1st class teak wood as per size on drg |
| 252 | Centre stiffener of size 900mmx20mmx60mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood |
| 253 | Corner shape wooden bracket of size 100mmx100mmx20mm shall be fixed to legs and rail with adhesive and screws. |
| 254 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 255 | TABLE 3' X 2' WITH DRAWER;- FD-283 |
| 256 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 257 | Legs of size 760mmx30mmx60mm made of 1st class teak wood as per size on drg |
| 258 | Top long rail of size 900mmx20mmx60mm made of 1st class teak wood as per size on drg |
| 259 | Top Short rail of size 600x20mmx60mm made of 1st class teak wood as per size on drg |
| 260 | Bottom rail of size 600mmx20mmx60mm made of 1st class teak wood as per size on drg |
| 261 | Centre stiffener of size 900mmx20mmx60mm in between bottom rail irrespective of what is shown in drg ,made of 1st class teak wood |
| 262 | Corner shape wooden bracket of size 100mmx100mmx20mm shall be fixed to legs and rail with adhesive and screws. |
| 263 | S & F new drawer made out of 18mm thick pre-laminated HDHMR board [ISI Marked] exterior grade with bottom of 6mm BWR plywood duly post-formed with 0.6mm thick laminate & 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 264 | S & F new handles 75mm long chrome plated of dia 8mm fixed with suitable screws. |
| 265 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. |
| 266 | TABLE BED SIDE:-FD- 276 |
| 267 | S & F new top made out of 18mm thick partcle board [ISI Marked] exterior grade duly post-formed with 0.6mm thick laminate on both sides & 2mm thick pvc edging on all exposing edges of make- Rehau / Pegasus / Kynex shall be pasted with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 268 | Sides of size 510mmx 230mm made out of 18mm thick prelaminated HDHMR board exterior grade as per existing shade with edges duly covered with 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 269 | Shelves of size 414mmx224mm made out of 18mm thick prelaminated HDHMR board exterior grade as per existing shade with edges duly covered with 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 270 | Bottom of size 414mmx224mm made out of 18mm thick prelaminated HDHMR board exterior grade as per existing shade with edges duly covered with 2mm thick pvc edging of make- Rehau / Pegasus / Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete. Rest all as per drg. |
| 271 | Back ply of size 392mmx432mm made of 6mm BWR plywood duly fixed with adhesive and headless nails as per drg. |
| 272 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler,rubbing and dusting the surface with clean muslin cloth and applying two coats of french polish to achieve glossy finish. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
