Tender For Special Repairs To Building No. Np-56 (Otm) And Roof Work Bldg No Np-55 & Np-54 Other Sanction Work Under Ge (South) Udh Ur.
Tender Value
48.53 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
2 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building No. Np-56 (Otm) And Roof Work Bldg No Np-55 & Np-54 Other Sanction Work Under Ge (South) Udh Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : SPL REPAIRS TO BLDG NO. NP-56 (OTM) AND ROOF WORK BLDG NO NP-55 & NP-54 OTHER SANCTION WORK UNDER GE (SOUTH) UDHAMPUR. Contract No:GE/S(U)-72/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-charge. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engr-in-charge.. |
| 4 | M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately) |
| 5 | Taking down eaves gutters and and rain water pipes (any size or pattern ), including all fittings incl removal of store and sold to contractor through credit. |
| 6 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed by Engr-in-charge. |
| 7 | Removing of old membrane from roof surfaces and cleaning the surface and roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engr-in-charge. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.. |
| 9 | Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified and directed by Engr-in-charge. |
| 10 | Dismantling wall ceiling board ( fibre, pulp,insulation etc ) or insulation board / slab/ blankets any thickness including cover fillets. |
| 11 | Dismantling water Tanks exc 500 ltrs & n.exc 1000 ltrs |
| 12 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 13 | Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for all as specified and directed by Engr-in-charge. |
| 14 | Demolition of cement concrete of any descriptionand in any position not otherwise specifically provided for all as specified and directed by Engr-in-charge. |
| 15 | Demolition of reinforced cement concrete of any description and in any position etc complete all as specified and directed by Engr-in-charge. |
| 16 | Demolition of brick/stone masonry built in CM. complete all as specified and directed by Engr-in-charge. |
| 17 | M&L water proofing treatment to the sunken portion with the removing existing treatment,Demolition including wire brushing and clearing the dust and foreign material etc complete, applying two coat of two component( 1part Polymer and second part cementitions powder) cementitions, polymer modified elastomeric, water proofing coating composed of cement, properly selected and graded aggregates, additive and acrylic emulsion polymer as a binder apply first coat of (mix and application as per manufacturer instruction) all over floor surface / prepared surface and apply to vertical surface up to 15 cm from tilling level, allow to dry 4 to 6 hours. Prepare for apply 2nd coat perpendicular to first coat and allow to dry 4 to 6 hours .All joints of /Trap/WC/Soil pipe shall be Properly sealed with ceiling compound / polymer modified mortar using Dr Fixit Pidicrete URP or equivalent ,Slope of slab shall be towards the Spout of GI pipe 50 mm dia . Provide 15 mm protective screed with cement- sand in 1.3 with WPC ( make: Dr Fixit LW+ or equivalent) within 2 to 3 days of second coat. Complete all as specified as per manufacture instructions/ as per direction of Engr-in–charge. |
| 18 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 19 | Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil/strata for foundation, etc, or for shafts, wells, drain pipes and getting out complete all as specified and directed by Engr-in-charge |
| 20 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engr-in-charge |
| 21 | Removing surplus spoil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed by Engr-in-charge |
| 22 | Cutting holes exceeding 150 sq.cm but nexc 400 sq.cm in to brick walls built in CM and making good in cement concrete 1:2;4 type B1 for fixing of cooler Brackets etc all as specified and directed by Engr-in-charge. |
| 23 | M&L for Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded cdrushed stone aggregate) as in slab supported on walls/chajjas and the like, all as specified and directed by Engr-in-charge. |
| 24 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping all as specified and directed by Engr-in-charge.. |
| 25 | M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-charge.. |
| 26 | M&L Non - Skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) size 300x300x10mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed by Engr-in-charge.. |
| 27 | S&F vitrified dark shade tiles 10mm thick (square/rectengular) (size 600x600x7-8mm thick ) area of each tile not exceeding 0.36Sqm,as in floor etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed by Engr-in-charge. |
| 28 | -------ditto ----- as in item no. 26 but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed by Engr-in-charge.. |
| 29 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and directed by Engr-in-charge. |
| 30 | M&L for glazed coloured ceramic tiles in dado/vertical surface (300x600mmx 7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed by Engr-in-charge. |
| 31 | M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles complete all as specified and directed by Engr-in-charge. |
| 32 | M&L for sand cushioning under floors including watering and consolidation all as specified and directed by Engr-in-charge. |
| 33 | M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and directed by Engr-in-charge. |
| 34 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.. |
| 35 | M&L for machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.. |
| 36 | M&L for 150mm wide strip of makrana white marble 20 mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types complete all as specified. |
| 37 | M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed by Engr-in-charge.. (Water proofing compound to be measured and paid for separately). |
| 38 | M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.. |
| 39 | M&L for Rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified and directed by Engr-in-charge. |
| 40 | M&L for preparation new surfaces plastered or unplastered and applying three coats of white wash on ceiling all as specified and directed by Engr-in-charge. |
| 41 | M&L for preparation Old surfaces including complete Removal of existing surface of white wash and applying two coats of white wash on ceiling all as specified and directed by Engr-in-charge. |
| 42 | M & L for preparation of complete removal of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spots and applying Two or more coats of 100% Premium acrylic emulsion paint on external surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 43 | M&L two coat of Oil bound distemper including a coat of primer over a layer of birla wgite putty including preparation of newly plastered surfaces of wall. |
| 44 | M&L for preparation Old surfaces including complete Removal of existing surface and applying two coats of Oil Bond distemper over a layer of brila white putty on walls all as specified and directed by Engr-in-charge. |
| 45 | Supply only liquid water proofing compound complete all as specified and directed by Engr-in-charge. |
| 46 | M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge. |
| 47 | M&L for factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, with both the faces covered with decorative face venner with lipping/ frame to match all as specified and directed by Engr-in-charge. |
| 48 | S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and directed by Engr-in-charge. |
| 49 | S&F steel window (box type) with gaused shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engr-in-charge.Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge,Glass shall be measured and paid separately. |
| 50 | Description all as per Srl Item No. 48 here in before but without glazing bar complete all as specified and directed by Engr-in-charge.Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 51 | S&F for Powder Coating anodised aluminum frame of doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed by Engr-in-charge. |
| 52 | S&F for Powder Coating anodised aluminium window and ventilator shutters, fixed/ sliding type without sash bar, aluminium section weighing 0.55 kg /m including three track necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed by Engr-in-charge. |
| 53 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks,cup Board etc and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engr-in-charge.. |
| 54 | S&F welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all as specified and directed by Engr-in-charge. |
| 55 | M&L for rolled mild steel work of angle iron as in frames of doors , Cup Board , Cooler stand And stair case etc conforming to grade Fe 410-O or Fe-310-O complete all as specified and directed by Engr-in-charge. |
| 56 | M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engr-in-charge. |
| 57 | S&F 100mm butt hinges ,medium weight ,cold rolled mild steel all as complete all as specified and directed by Engr-in-charge.. |
| 58 | M&L for 18/19 mm thick HDHMR board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge. |
| 59 | S&F 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed by Engr-in-charge. |
| 60 | S&F mild steel, 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed by Engr-in-charge. |
| 61 | Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and directed by Engr-in-charge. |
| 62 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 63 | S&F 4 mm thick figured glass (frosted) ,pin head type and glazing with oil putty not exc 0.50 Sqm in each pane fixing to window/ventilator complete all as specified and directed by Engr-in-charge. |
| 64 | S&F galvanised Mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-charge. |
| 65 | S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, all as specified and directed by Engr-in-charge. (ISI Mark) |
| 66 | S&F 150 mm stainless steel, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-charge. (ISI Mark) |
| 67 | S&F 150 mm stainless steel handle, oval type stove enamelled black complete all as specified and directed by Engr-in-charge. (ISI Mark) |
| 68 | S&F 100 mm stainless steel handles, cast type anodised complete all as specified and directed by Engr-in-charge. (ISI Mark) |
| 69 | S&F Stainless steel curtain rod of 25mm dia , chromium plated with model of 304 stainless steel, heavy duty of thickness of wall 1-2 mm with fixing brackets, stops rollers etc. |
| 70 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side Prelam PVC sheet used instead of plain colour PVC Sheet and edge will be painted to match with prelam sheet. reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and directed by Engr-in-charge. |
| 71 | S&F Factory made solid panel PVC Moulded door shutter 28-30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 72 | M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr-in-charge. |
| 73 | M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer complete all as specified and directed by Engr-in-charge. |
| 74 | Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and directed by Engr-in-charge.Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour. |
| 75 | Material and labour for Applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat all as specified and directed by Engr-in-charge. |
| 76 | M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 bricks all complete all as specified and directed by Engr-in-charge. |
| 77 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engr-in-charge. |
| 78 | S&F in repair vitreous China wash basin, white, flat back , size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with pedestal, long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge. |
| 79 | S&F in repairs 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-charge. |
| 80 | S&F water closet (Orissa pattern) including lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe) fixed in repairs complete all as specified and directed by Engr-in-charge. |
| 81 | S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed by Engr-in-charge. |
| 82 | S&F in repair 600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed by Engr-in-charge. |
| 83 | S&F steel peg set colour coated of six as per sample in repairs complete all as specified and directed by Engr-in-charge. |
| 84 | PVC (SWR) pipes 110mm bore type-B ( Wall thickness 4 to 5 mm) single socketed , in any length with rubber ring joints fixed to wall |
| 85 | PVC (SWR) pipes 75mm bore type-B ( Wall thickness 4 to 5 mm) single socketed , in any length with rubber ring joints fixed to wall |
| 86 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) bend any radius for 110mm bore pipe |
| 87 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) bend any radius for 75mm bore pipe |
| 88 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) branch piece single (single Y ) equal or unequal for 110mm bore pipe |
| 89 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) branch piece single (single Y ) equal or unequal for 75mm bore pipe |
| 90 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) junction single (single T ) equal or unequal for 100mm bore pipe |
| 91 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) junction single (single T ) equal or unequal for 75mm bore pipe |
| 92 | S&F PVC (SWR) reducers for100mm bore pipe |
| 93 | S&F PVC (SWR) type-B ( Wall thickness 4 to 5 mm) reducers for75mm bore pipe |
| 94 | S&F PVC (SWR)'P' Trap for110mm bore pipe |
| 95 | S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe . all as specified. |
| 96 | S&F 75mm Cast iron cowls |
| 97 | S& F 110 mm bore PVC SWR bends and fixed with joint sealent etc complete all as specified and directed by Engr-in-charge. |
| 98 | S&F 110mm Pvc (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall incl clamp etc complete all as specified and directed by Engr-in-charge. |
| 99 | S&F stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof 100mm bore of pipe complete all as specified and directed by Engr-in-charge. |
| 100 | M/L for PCC 1:5:10 TY E-2 as in Sunken floor /foundation filling and mass Conc all as specified and directed by Engr-in-charge. |
| 101 | S&F 9mm thick Gypsum ceiling board one side decorative and other side cover with aluminium foil (designer ceiling) of size 600mm x 600mm panel confirming to IS 14862 type B category three incl GI frame work with size of grid 605 mm x 605mm for seanless ceiling comprises of GI perimeter incl all accessories, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free complete all as specified and directed by Engr-in-charge.. |
| 102 | S&F viterious china urinals half stall white incl CP urinal Spray Nozzal complete incl providing and fixing of plug bedding urinal against wall in cement motor 1:2 securing urinal to plug with and incl 60mm long brass screws pointing incl 60mm long brass complete all as specified and directed by Engr-in-charge. |
| 103 | Supply only flush pipe of PVC 32 mm dia for low level cistern. all as specified and directed by Engr-in-charge. |
| 104 | Taking up or down steel tubing 15 mm dia with connections for cleaning for refixing or removing to store yard complete all as specified and directed by Engr-in-charge. |
| 105 | Taking up or down steel tubing 20 mm dia with connections for cleaning for refixing or removing to store yard complete all as specified and directed by Engr-in-charge |
| 106 | M & L 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engr-in-charge |
| 107 | M & L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engr-in-charge |
| 108 | Refixing old steel water tubing 15 mm bore medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed by Engr-in-charge. |
| 109 | Refixing old steel water tubing 20 mm bore medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and directed by Engr-in-charge. |
| 110 | S&F in repair PVC connection 15mm bore with ptmt nuts of length 450mm |
| 111 | S&F fancy type chromium plated stop valve cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm with long shank and cup (concealed type). |
| 112 | M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm |
| 113 | M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm |
| 114 | S&F in repairs CP Pillar cock with aerator |
| 115 | S&F in repairs 15mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule. |
| 116 | S & F in repairs 15 mm dia WHB mixer centre hole chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and directed by Engr-in-charge. |
| 117 | S&F in repairs CP Soap dish all as specified and directed by Engr-in-charge. |
| 118 | S&F in CP waste cuppling32mm dia (Half thread) including waste pipe all as specified and directed by Engr-in-charge. |
| 119 | S&F in repairs grating doom 100mm dia of PTMT(Minimum weight 25 gms) |
| 120 | S&F 15 mm bore chromium plated Bib cock with wall flange and aerator complete all as specified and directed by Engr-in-charge. |
| 121 | S&F self closing angle cock pressmatic for urinal with flange and 200 mm connecting pipe and spreader. |
| 122 | M & L in repairs brass chromium plated shower rose 75mm size with swivel joint fixed to pipe or union of 15mm bore complete all as specified and directed by Engr-in-charge. |
| 123 | Rottational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories, all as specified and directed by Engr-in-charge. |
| 124 | M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre |
| 125 | M & L for providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges |
| 126 | M & L for providing, 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) all over the roof surface complete all as specified and directed by Engr-in-charge. |
| 127 | M & L for rendering 10 mm thick on fair faces of concrete surface in CM 1:3 finished even and smooth without using extra cement with WPC @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions |
| 128 | SmartCare Waterproofing by Asian Paints Ltd General Specification for Waterproofing System for Terrace M&L for preparation of surface by scrapping and properly cleaning the existing roof treatment in any number of layers up to original RCC roof top surface. Apply first coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.45ltr/sqm. Apply third and final coat undiluted @0.45ltr/sqm all as specified and directed by Engr-in-charge..) |
| 129 | Supply and fixing \\"as in repair\\" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-charge. |
| 130 | M&L for pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.60 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and directed by Engr-in-charge. |
| 131 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-charge. |
| 132 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde- E- 250) quality- A- |
| 133 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and directed by Engr-in-charge. |
| 134 | M&L two coats of oil bound distemper on walls including preparation on new/old surfaces including applying 1 mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed. Note :- (Before applying of wall care putty, complete removing of treatment all as specified and directed by Engr-in-charge.). |
| 135 | Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and directed by Engr-in-charge |
| 136 | Supply and fix powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and directed by Engr-in-charge |
| 137 | M & L for sheet glass 5.5mm thick of one side view or etching on glass as approved by Engr in Charge, ordinary quality and glazing with beads fixed with metal panel pins, EPDM washers or connected accessories in each pane complete all as specified and directed by Engr-in-charge |
| 138 | S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-charge |
| 139 | M&L for glazed coloured ceramic tiles in dado/vertical surface (450mm x300mm x 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed by Engr-in-charge |
| 140 | M&L for providing 200mm bore pipe concre bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested.in mix 1:3:6 Type C-2 using 40 mm graded stone aggregates complete all as specified and directed by Engr-in-charge |
| 141 | M&L 200mm bore Reinforced concrete pipes,class NP2,laid and jointed complete with coller all as specified and directed by Engr-in-charge |
| 142 | M&L for providing precast cement concrete type B1 1:2:4 using 20mm graded crused stone aggregate in landings, cover slab, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed by Engr-in-charge |
| 143 | M&L for Rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed by Engr-in-charge |
| 144 | M&LProviding cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and directed by Engr-in-charged. |
| 145 | M & L for cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed by Engr-in-charge |
| 146 | M & L for cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in surface channels and drains complete all as specified and directed by Engr-in-charge |
| 147 | M&L for Vitrified coloured heavy duty (chequered cement ) tiles of size 300 x 300 x 10mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge |
| 148 | M & L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in coping, edging concrete incl necessary formwork, weathering, slightly rounded or chamfered angles all as specified and directed by Engr-in-charge |
| 149 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed by Engr-in-charge |
| 150 | Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth in hard/dense soil and getting out all as specified and directed by Engr-in-charge |
| 151 | Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/Metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall / ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white/ colour wash complete all as specified and directed by Engr-in-charge .Make : Havells/ Finolex/ Polycab. |
| 152 | All as per Item No.150 But for one light point control by two nos two way switches with other Independent Board with 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor as earth lead complete all as specified and directed by Engr-in-charge |
| 153 | All as per item no 150 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 154 | All as per item no 150 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 155 | All as per Srl item No 150 but for 3/5 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly. |
| 156 | All as per Srl item No 150 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4 Sq mm including copper PVC insulated PVC unsheathed suitable earth wire standard and connected to earth dolly. |
| 157 | S&F for modular switch 10 Amps single pole two way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr-in-charge. |
| 158 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr-in-charge |
| 159 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr-in-charge |
| 160 | S&F for modular socket 3/5 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr-in-charge |
| 161 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 162 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Blockcomplete all as specified and directed by Engr-in-charge. |
| 163 | S&F electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed by Engr-in-charge. |
| 164 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection and all as specified and directed by Engr-in-charge |
| 165 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make:Havells/Bajaj/CG |
| 166 | S&F Sheet metal enclosure double door type for MCCB VTPN DB upto 125 Amps, 4 way vertical type 415 volts with suitable rated busbar and neutral link including MCCB 125 Amps , chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge |
| 167 | S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.(Note-MCBs will be measured separately) |
| 168 | S & F in replacement MCB single pole 240 volt any rating from 6 to 32 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable . |
| 169 | S & F in replacement MCB Single pole and neutral 240 volt any rating from 40/63 amps\\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable . |
| 170 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit of suitable size including PVC insulated copper conductor cable 10 Sq mm as earth lead all as specified and directed by Engr-in-charge. Including taking down old sub main wire. |
| 171 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm in PVC concealed conduit of suitable size including PVC insulated copper conductor cable 2.5 Sq mm as earth lead all as specified and directed by Engr-in-charge. For building light. |
| 172 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and directed by Engr-in-charge testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost. |
| 173 | Supply and fixing replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 174 | S&F in repairs LED tube light fitting Garnet 20W Batten LED, lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one. |
| 175 | S&F in repairs LED tube light fitting Garnet 10W Batten LED, with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one. |
| 176 | S&F in replacement sheet metal enclosure MCB distribution board Single pole & neutral 240 volts 4 way with single door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces. |
| 177 | Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with \\"XLPE\\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 4 core size including taking out old unsv UG cable any type/size all as specified and directed by Engr-in-charge. |
| 178 | S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified and directed by Engr-in-charge |
| 179 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed by Engr-in-charge Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender